Amart Furniture SIGNATURE LA SALLE 63808 User manual

ASSEMBLY INSTRUCTION
LA SALLE QUEEN BED
ITEM CODE 63808
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
63808

IMPORTANT: CARE GUIDE FOR YOUR
TIMBER FURNITURE
1
•Congratulations! You have just purchased a quality product from Amart
Furniture. Please read on for important information regarding your purchase.
• A multi-step finish is applied to all our furniture, but all wood comes from
nature. Because of this, there will be natural variations in surface texture and
grain like knots, mineral streaks and sap runs that may affect the finish.
• These differences in character are not defects, but distinctions that make
each piece of furniture unique.
• Our furniture is built to last. Following these steps for basic care should
protect your investment for years to come.
• Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
• Do not place hot objects on any furniture surface. Always use a coaster or
placemat. Laminate and lacquer finishes on table tops provide added scratch
and heat resistance to our furniture, but they can still be damaged without
proper care.
• Avoid exposing your furniture to strong sunlight, heat outlets, open windows
or dampness. Prolonged exposure to direct sunlight can fade the finish of
your furniture, while extreme temperature and humidity changes can cause
cracking or splitting.
• Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs.
• Do not allow plastic to come in direct contact with your furniture. Chemicals
in the plastic of placemats etc may soften and mark the finish if left in contact
with the furniture for a period of time.
63808

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage
the product
2. Take care when lifting. Product should be assembled as near as possible to the point
of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
2
Allow at least 45min you will need 2 people
263808

A
M6 X 10 BOLT
12
PCES
B
M6 X 60 BOLT
2
PCES
C
M5 ALLEN KEY
1 PCE
D
M4 ALLEN KEY
1 PCE
E
M4 X 30
SCREW
16
PCES
F
M4 X 40
SCREW
2
PCES
G
M6.5 X 19 FLAT
WASHER
2
PCES
H
M6.5 X 9
SPRING
WASHER
2
PCES
Part
DESCRIPTION
Qty
In box
Part
DESCRIPTION
Qty
In box
1
HEADBOARD
1
1
4
CENTRE RAILS
1
3
2
FOOTBOARD
1
2
5
SUPPORT LEGS
2
1
3
SIDE RAILS
2
3
6
SLATS
14
4
PARTS LIST
3
6
63808

STEP 1:
•Attach side rail (3)to headboard (1) and footboard (2) using bolts (a).
•Tighten with Allen Key (c).
STEP 2:
•Attach Support legs (5) to Centre rail (4) with bolts (b) and Flat Washers (g)&(h).
•Tighten with Allen Key (d).
4
c
a
63808

5
STEP 3:
• Attach centre rail (4) to Headboard (1) and Footboard (2) using Screw (f).
•Use Screwdriver or Power Drill on Low Speed.
STEP 4:
•Attach Slats (6) to Siderail (3) using Screw (e).
•Use Screwdriver or Power Drill on Low Speed.
•Please only screw down every 2nd slat.
•First and last slats need two screws each.
1
f
e
6
63808

6
CAUTION
Always Lift Your Bed When Moving/Relocating – Do Not Drag.
Dragging Can Cause The Centre Support Legs To Bend/Break
ASSEMBLY IS COMPLETE
63808