Amart Furniture 56423 User manual

1
56423
1500mm
ASSEMBLY INSTRUCTION
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
CHANELLE KING BED
ITEM CODE 56423

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
256423
20

1
2b 4
4
5
7
3
5
6
2a
2b
3
4
5
6
HEADBOAD LEG LEFT
FOOTBOARD
SIDE RAIL
MIDDLE RAIL
SUPPORT LEG
SLATS 1545mmx60mm
1 pc
1 pc
2 pcs
2 pcs
6 pcs
13 pcs
a. Bolt M6x35 b. Bolt M6x60 c. Bolt M8x25
e. Spring washer f. Allen key
1 pc
20 pcs 6 pcs 8 pcs
14 pcs
1HEADBOAD PANEL 1 pc
HEADBOAD LEG RIGHT 1 pc
7
g. Screw M4x30
20 pcs
6
6
6
6
6
d. Flat washer
14 pcs
h. Adhesive felt pad
20x20x5
356423
2a
12 pcs

With two people carefully lay the Footboard on to a sheet or piece of
cardboard.
Attach adhesive felt pad onto the legs.
With two people carefully stand the Footboard upright.
h
h
h
456423

ae
d
f
1
56423
4
c
f
STEP 1: Tighten the headboard leg , to headboard panel with
bolts , spring washer and flat washer .
2a 1
aed
2b
STEP 2: Attach side rails to headboard legs , and footboad by
interlocking the brackets on the siderail with the screws on the
headboard/footboard and then push down to lock in place.
42a 2b 3
2a
2b
4
3
2b
2a
5

b
f
7
5
6
74
STEP 4: Affix the Stiffener slat to the side rail with screws and
bolt . g
a
756
b
STEP 3:Tighten the slats and middle rail to all support legs with
bolt .
a
f
g
7
656423

IMPORTANT NOTE:
·Once the bed is positioned and the support legs are adjusted to touch floor, the slats can then
be laid down and secured before putting on the mattress.
·DO NOT push or pull the bed if there is a need for re-positioning as this may result in broken
support legs for the centre rail.
ASSEMBLY IS COMPLETE
56423
7

suitable
and sudden