Amart Furniture SIGNATURE ARGENTO 63982 User manual

ASSEMBLY INSTRUCTION
ARGENTO LAMP TABLE
ITEM CODE 63982
650mm
650mm
500mm
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
163982

2
suitable
and sudden
63982

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
63982

463982
8 pcs
NO. HARDWARE LIST QT'Y
AAdhesive felt pad
20x20x5
A(X8)
STEP 1:
With two people carefully lay the Lamp Table on to a sheet or
piece of cardboard.
Attach adhesive felt pad (A) onto the legs.
With two people carefully stand the Lamp Table upright.

Take out handle from drawer, use
screwdriver removing the bolts. Attach handle in front of drawers,
on the drilling hole position by using
screwdriver to tighten bolts up.
63982
WALL
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.
STEP 2: Attach the handle
5

WALL
ASSEMBLY IS COMPLETE
63982
6