Amart Furniture LOCKLYN 72725 User manual

ASSEMBLY INSTRUCTION
LOCKLYN QUEEN BED
ITEM CODE 72725
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
1
1190mm
2132mm
1600mm
72725

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
72725

3
PARTS LIST
2
3
4
5
Middle rails
2 pcs
6 pcs
1 Headboard 1 pc
Side rails
2 pcs
3 pcs
NO. PARTS LIST QT'Y
Support legs
Middle Slats
Footboard 1 pc
Bolt M6x60mm 6 pcs
NO. HARDWARE LIST QT'Y
B
C
Screw M4x30mm 28 pcs
D
Allen Key 4mm 1 pc
6
A
Bolt M8x25mm 8 pcs
14 pcsSlats
7
1
E
4 pcs
G
Bolt M6x35mm 6 pcs
4
5
55
5
5
5
3
3
2
7
7
6
72725
Adhesive felt pad
Ø20x5mm

4
GG
1
2
72725
E
B(x8)
1
2
3
3
STEP 1: Attach adhesive felt pad (G) onto the legs.
STEP 2: Attach side rails (3) onto headboard (1) and footboard (2) using the bolts (B), tighten it
up by using an allen key (E).

5
E
A
(x6)
H frame
6
4
5
5
5
5
5
5
Assembly these components out of bed frame.
E
C
(x6)
3
3
H frame
72725
Attach H frame onto side rails (3) using the bolts (C), tighten it up by using an allen key (E).
STEP 3: Attach support legs (5) onto middle rails (4) and middle slats (6) using the bolts (A),
tighten it up by using an allen key (E).
STEP 4: Use two people to place H frame onto side rails (3).

ASSEMBLY IS COMPLETE
6
7
7
D(x28)
3
3
72725
Attach slats (7) onto side rails (3) using the screws (D), tighten it up by using a screwdriver.
. DO NOT push or pull the bed if there is a need for re-positioning as this may result in broken
support legs for the centre rail.
IMPORTANT NOTE:
STEP 5: Once the bed is positioned and the support legs are adjusted to touch floor,the slats
can then be laid down and secured before putting on the mattress.

suitable
and sudden