Amart Furniture Valdis 73870 User manual

Imported by Amart Furniture Pty Ltd, ,Brisbane, Qld, Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
Valdis BEDSIDE
ITEM CODE 73870
Imported by Amart Furniture Pty Ltd, Brisbane Qld, Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture , Customer Service Free call 1800 351
084
1ITEM CODE 73870
583mm

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 73870
We recommend using a
screwdriver to put this item
together. However if you choose
to use a power drill it must be
used on LOW SPEED (LOW
TORQUE) as too much pressure
could damage the product
ALLOW 40 MINITES 2 PEOPLE REQUIRED

3ITEM CODE 73870
PARTS LIST
1
2
3
4
6
10
7
11
13
14 9
512
X4
X2
8
15
1
Drawer Handle
2
Support Bar
3
Top Board
4
Side Board
5
Side Board
6
Bottom Board
7
Back Board
8
Drawer Front Board
9
Drawer Front Board
10
Drawer Side Board
11
Drawer Side Board
12
Drawer Bottom Board
13
Drawer Back Board
14
Frame
15
Frame
X2

ITEM CODE 738704
A. Ø15X12mm
AX12 BX12 CX8
C. Ø8X40
DX4
D. M5X50
FX20
F. M3.5X15
O.
OX1
E. M4X40mm
EX8 HX4
I. L350mm J. L350mm K. L350mm L. L350mm
M. M6X15mm
IX2 JX2 KX2 LX2
MX12
N.
B. M6X39mm
G. M4*14
GX14
H. M4*28

ITEM CODE 738705
STEP:1
STEP:2
10
11
8
8
10
11
8
10
11
13
12
12
A. Ø15X12mm
AX4 BX4
B. M6X39mm 1. Fix cam pin (B) to drawer front board (8).
2. Attach drawer side board (10)(11) to
drawer front board (8) with cam locks (A)
1. Put bottom board (12) into
groove of board (10)(11)and
(8).
2.Put the drawer back board
(13) on the drawer.
A
B
A
B

ITEM CODE 738706
STEP:3
EX4
E. M4X40
FX4
F. M3.5X15 J. L350mm L. L350mm
JX1 LX1
E
10
11
12
8
12
13
11
11
12
8
10
10
1. Attach the drawer back board
(13) with screws (E)
2. Install runner(J)(L) to the bottom
of drawer with screws(F).
L
J
L
J
F

ITEM CODE 738707
STEP:4
11
12
810
13
1
!
HX2
Fix handle (1) to the drawer front board (8) with screws (H)
H. M4*28

ITEM CODE 738708
STEP:5
STEP:6
10
11
9
9
A. Ø15X12mm
AX4 BX4
B. M6X39mm
1. Fix cam pin (B) to drawer front board (9).
2. Attach drawer side board (10)(11) to
drawer front board (9) with cam locks (A)
）
A
B
A
B
10
9
10
11
13
12
12
1. Put bottom board (12) into
groove of board (10)(11)and
(8).
2.Put the drawer back board
(13) on the drawer.
11

ITEM CODE 738709
STEP:7
EX4
E. M4X40
FX4
F. M3.5X15 J. L350mm L. L350mm
JX1 LX1
1. Attach the drawer back board (13)
with screws (E)
2. Install runner(J)(L) to the bottom
of drawer with screws(F).
J
E
10
11
12
9
12
13
11
10
L
9
11
12
10
LF
J

ITEM CODE 7387010
STEP:8
STEP:9
11
12
9
10
13
1
!
HX2
Fix handle (1) to the drawer front board (9) with screws (H)
H. M4*28
4
5
C
CX8
C. Ø8X40 Insert dowel (C) to side board (4)(5)
H

ITEM CODE 7387011
STEP:10
STEP:11
I. L350mm K. L350mm
IX2 KX2 FX12
F. M3.5X15 Install runner(I)(K) to
the side board (4)(5)
with screws (F)
K
I
K
I
!
F
4
5
3
B
BX4
B. M6X39mm Fix cam pin (B) to the top board (3)
B

ITEM CODE 7387012
STEP:12
STEP:13
A. Ø15X12mm
AX4
A
A
5
Attach the side board (4)(5) to the top board (3) with cam locks
(A).
4
3
DX4
D. M5X50
D
Attach the bottom
board (6) to the body
with the screws (D)
4
53
6
D

ITEM CODE 7387013
STEP:14
STEP:15
O.
OX1
M. M6X15mm
MX4
Attach frame (14) to the bottom board (6)
with bolt (M)
14
M
O
14 4
53
6
14
4
53
6
2
2
2
2
O.
OX1
M. M6X15mm
MX4
2
M
O
Fix support bar (2) to frame (14) with bolt (M)
O
O

ITEM CODE 7387014
STEP:16
STEP:17
4
53
6
65
4
14
15
12
M
O
O.
OX1
M. M6X15mm
MX4
15
Attach frame (15) to the body with bolt (M)
G. M4*14
GX14
G
Attach back board (12) to the body with screws (G)
O

ITEM CODE 7387015
STEP:18
STEP:19
8
8
9
4
5
3
4
3
5

ITEM CODE 7387016
ASSEMBLY COMPLETE

17 TEM ICODE 73870
SAFETY BRACKETS INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach
the Mounting Plate into a stud. If mounting into brick or masonry you will need to
acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and furniture
and that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2

18
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto your
furniture as sharp material may scrape and damage the finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
TEM ICODE 73870