AmazonBasics B00X4R9VBA User manual

Ultra Thin Indoor TV Antenna - 25 Mile Range
Ultra Thin Indoor TV Antenna - 35 Mile Range
Ultra Thin Indoor TV Antenna - 50 Mile Range
Antena TV para Interiores Ultra Fina - 25 millas
Antena TV para Interiores Ultra Fina - 35 millas
Antena TV para Interiores Ultra Fina - 50 millas
B00X4R9VBA
B00X4RA74A
B01IN26Z5A
All manuals and user guides at all-guides.com
all-guides.com

E n g l i s h ............................. 5
E s p a ñ o l .. ...........................12
loñapsEhsilgnE
All manuals and user guides at all-guides.com

Ultra Thin Indoor TV Antenna - 25 Mile Range
Contents:
Before getting started, ensure thepackage containsthefollowing
components:
Welcome Guide
1
EnglishEspañol
PartQty
Ultra Thin
Indoor TV
Antenna
1
Hook &
Loop Tabs
Push Pins
6 ft.
Coaxial Cable
4
4
1
All manuals and user guides at all-guides.com

Ultra Thin Indoor TV Antenna - 35 Mile Range
Contents:
Before getting started, ensure thepackage containsthefollowing
components:
Contents
2
EnglishEspañol
PartQty
Ultra Thin
Indoor TV
Antenna
1
Hook &
Loop Tabs
Push Pins
10 ft.
Coaxial Cable
4
4
1
All manuals and user guides at all-guides.com

Ultra Thin Indoor TV Antenna - 50 Mile Range
Contents:
Before getting started, ensure thepackage containsthefollowing
components:
Contents
3
EnglishEspañol
PartQty
Ultra Thin
Indoor TV
Antenna
1
Hook &
Loop Tabs
Push Pins
16 ft.
Coaxial Cable
4
4
1
All manuals and user guides at all-guides.com

Ultra Thin Indoor TV Antenna - 50 Mile Range
Continued:
Contents
4
EnglishEspañol
PartQty
Amplifier
1
USB Power
Adapter 1
All manuals and user guides at all-guides.com
all-guides.com

EnglishEspañol
1
ANT IN
2
Attach the coaxial cable to the antenna by connecting either end of
the coaxial cable to the connector on the antenna.
Non-Amplified Antenna
Attach the other end ofthe coaxial cable into the ANT IN connector
on the back of your tv.
5
Setup:
Step 1:
Step 2:
All manuals and user guides at all-guides.com

EnglishEspañol
Amplified Antenna
ANT INUSB
A. Attach the other end of the coaxial
cable to the connector on the amplifier.
B. Connect the coaxial cable attached
to the amplifier to the ANT IN connector
on the back of your TV.
C. The amplifier must be powered in
order to function. Plug the amplifier’s
USB cable into an open USB port on
the back of the TV or use the included
power adapter in any standard 120V
wall outlet.
A
B
C
6
Setup:
Step 2:
All manuals and user guides at all-guides.com

EnglishEspañol
Install the antenna near your TV. You can use the included push
pins in the two small holes at the top edge of the antenna to
secure it to a convenient wall, bookcase, or any other
non-metallic structure.
3
7
Setup:
Step 3:
All manuals and user guides at all-guides.com

EnglishEspañol
In your TV’s setup menu, set
the signal type to “antenna”.
In your TV’s setup menu, set
TV to “scan” for channels.
cable
antenna
SIGNAL TYPE
25%
SCANNING
8
Setup:
Step 4:
Step 5:
All manuals and user guides at all-guides.com

EnglishEspañol
How many channels will I receive with
the antenna?
The number of channels will vary from location to location. Generally, if
you live in or near a metropolitan area, you will receive more channels
than if you live outside a metropolitan area. Keep in mind that antenna
reception may vary based on terrain (including trees, buildings, hills,
and mountains). The fewer obstructions, the better your chance for
receiving strong digital signals.
What channels can the antenna receive?
The antenna is capable of receiving programming from major local
broadcast networks (e.g. ABC, CBS, FOX, NBC, PBS) plus many
additional networks (like Qubo, ION, The CW, This TV, MyNetworkTV,
Azteca, Telefutura, Univision, and Telemundo). The antenna can also
receive local news, weather, and educational programs that satellite and
cable might not offer.
How can I find out what channels
are broadcast in my area?
Enter your address to get a listing of likely channels available in your
area at: dtv.gov/maps
Do I need to pay for programming?
No, local programming received through an over-the-air antenna is free!
9
FAQ:
All manuals and user guides at all-guides.com
all-guides.com

EnglishEspañol
How often do I need to run a channel scan?
Run a channel scan after setting up the antenna, and any time you move
the antenna. It's a good idea to run a channel scan monthly to keep
your channels up-to-date.
How do I know where the signal is strongest?
Try the antenna in different locations, making sure to run a channel scan
every time you move the antenna. The fewer obstructions between the
antenna and the tower and the higher the antenna is mounted, the
better the chance of receiving a strong signal. Sometimes moving a few
feet can make a difference.
Some HDTVs have a signal strength indicator that shows you how strong
your signal is. See the instructions that came with your HDTV to see if
yours has that feature.
Is there anywhere that the antenna
shouldn’t be mounted?
The antenna is designed for indoor use only. The antenna is not meant
to be mounted outdoors or in the attic.
NOTE: Metal roofing and/or metallic radiant heat barriers in attics can
affect signal reception.
10
FAQ:
All manuals and user guides at all-guides.com

EnglishEspañol
I am not getting any channels.
• Run a channel scan on your HDTV. Select Antenna, Off-Air Mode, or
Auto-scan, depending on your HDTV. See your TV manual for
more information.
NOTE: Running a channel scan is NOT the same as pressing Channel
UP/DOWN on your remote.
• Move the antenna, then re-run the channel scan. Something may be
obstructing the signal.
• If troubleshooting this issue for the 50-mile range antenna, use the
USB power adapter instead of the USB port on your HDTV to
get more power.
• Try adding or removing the amplifier if your model came with one.
One channel is missing.
• Move the antenna, then re-run the channel scan. Something may be
obstructing the signal.
• Try turning the antenna 10 or 20 degrees in either direction to avoid
reflection, then re-run the channel scan.
The picture or sound freezes while I am watching
a channel, or there are boxes in the picture.
• This is often caused by a weak or intermittent signal, which can be a
result of multiple factors including geographical obstructions, severe
weather, and metal structures in the home. Try moving the antenna to a
different location or aiming it directly toward the broadcast towers in
your area.
11
Troubleshooting Instructions:
All manuals and user guides at all-guides.com

EnglishEspañol
1
ANT IN
2
Conecte el cable coaxial a la antena conectando cualquier fin del
cable coaxial en el conector de la antena.
Non-Amplified Antenna
Conecte el otro fin del cable coaxial en el conector ANT IN atrásde
su televisor.
12
Setup:
Step 1:
Step 2:
All manuals and user guides at all-guides.com

EnglishEspañol
Amplified Antenna
ANT INUSB
A. Conecte el otro fin del cable
coaxial al conector situado en el
amplificador.
B. Conecte el cable coaxial fijado al
amplificador al conector ANT/IN en la
parte trasera de su televisor.
C. El amplificador debe estar
encendido para poder funcionar.
Conecte el cable USB del amplificador a
un puerto USB disponible en la parte
trasera de su televisor. Si su televisor
no dispone de un puerto USB, utilice el
adaptador de corriente incluido para
encender el amplificador a través de
cualquier toma de corriente estándar de
120V.
A
B
C
13
Setup:
Step 2:
All manuals and user guides at all-guides.com

EnglishEspañol
Instale la antena cerca de su televisor. Puede utilizar las
tachuelas incluidas, en los dos pequeños hoyos en la orilla de la
antena, para asegurarlo a una pared conveniente, un librero, o
cualquier otra estructura que no sea metálica.
3
14
Setup:
Step 3:
All manuals and user guides at all-guides.com
all-guides.com

EnglishEspañol
En el menú de configuración
de su televisor, ponga el modo
de sintonizar a “antena”.
En el menú de configuración
de su televisor, ponga su
televisor a “escanear” por
canales.
cable
antenna
SIGNAL TYPE
25%
SCANNING
15
Setup:
Step 4:
Step 5:
All manuals and user guides at all-guides.com

EnglishEspañol
16
Safety and Compliance:
The Waste Electrical and Electronic Equipment (WEEE) Directive
aims to minimize the impact of electrical and electronic goods on the
environment, by increasing re-use and recycling and by reducing the
amount of WEEE going to landfill.
Symbol on this product or its packaging signifies that this product
must be disposed separately from ordinary household wastes at its
end of life. Be aware that this is your responsibility to dispose of
electronic equipment at recycling centers in order to help conserve
natural resources.
Each country should have its collection centers for electrical and
electronic equipment recycling. For information about your recycling
drop off area, please contact your related electrical and electronic
equipment waste management authority, your local city office, or
your household waste disposal service.
Regulatory Information: Disposal of Waste
Electrical and Electronic Equipment (WEEE)
All manuals and user guides at all-guides.com

EnglishEspañol
17
Safety and Compliance:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installa tion.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment offand on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Changes or modifications not expressly approved by the party
responsible for compliance may cause interference and void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
For amplified product ASIN B01IN26Z5A only.
All manuals and user guides at all-guides.com

EnglishEspañol
18
Warranty Information
To obtaina copy of the warrantyfor this produc t:
— or —
Contact Customer Service at
1-866-216-1072
Visit amazon.com/AmazonBasics/Warranty
Feedback
Love it? Hateit?
Let us know with a customer review.
AmazonBasicsis committed to delivering custome r- dr iven products that live up
to your high standards. We encourage you to write a review sharing your
experienceswith the product.
Please visit: https://www.amazon.com/review/review-your-purchases
For further service:
Visit amazon.com/gp/help/customer/contact-us
— or —
Contact Customer Service at 1-866-216-1072
All manuals and user guides at all-guides.com