Amcrest SmartHome AL-KIT1-PP User manual

Quick Start Guide
Home Alarm System
Model: AL-KIT1-PP
2
We’d Love to Hear from You!
We wanted to personally reach out and thank you for
purchasing from our Amazon store. Selling on Amazon
is what we do to support our family, and product
reviews are the lifeblood of our business. It would mean
the world to us if you could take one minute of your time
to help share the love by leaving us an honest review
using the link below:
www.amazon.com/ryp
Thank you again for being one of our amazing
customers!
Sincerely,
Amcrest Team
Smart Home
Alerts
Motion
Sensor
2 Contact
Sensors
DIY
Installation

LED Behavior
Please refer to the table below for details regarding the LED
behavior of the device.
LED Indicator
Pair/Siren
Button
RESET
Speaker
Reset
Power
Port
What’s Included?
Sensor Hub Power Accressories
Bracket Pin
3
Product
Overview
01
4
Home/Away/Disarm mode is
activated.
Ready for network connection.
Ready to pair. Press the Pair button.
The device is rebooting.
Connecting to network.
An alarm has been triggered.
Firmware upgrade is in progress.
Behavior Description
Solid
Flashing
Rapidly Flashing
Solid
Flashing
Rapidly Flashing
Alternating
Note: The alarm hub can
support up to 32 sensors.

02
Setting Up
the Hub
To get the app, search for
“Amcrest Smart Home” in the
Google Play or App Store.
The Amcrest Smart Home app
connects your device to your Android
or iOS mobile device, ensuring you are
always connected to what matters
most.
5 6
RESET
USB Power Port
Initial Physical Setup
Connect the power cable
to the included USB
adapter and plug it into a
nearby wall outlet. Plug the
other end of the power
cable into the USB power
port on the hub.
LED
Indicator
The hub will begin to
initialize. Once the LED
indicator is flashing blue,
the hub will be ready to
connect to the Amcrest
Smart Home app.

Connecting to the Smart Home App
Open the Amcrest Smart
Home app and tap
“Register” to register an
account. After registering
an account, log into the
app and tap “Add Device”.
You will need to allow any
notification and location
permissions to allow the
device to connect to your
mobile device.
7
Scan the QR Code or Manually
Enter the S/N
Scan the QR code located
on the hub.
If you are unable to scan
the QR code you can
manually enter the serial
number by tapping
“Manually enter SN”.
8

9
Note: After the hub has been
added to the account it is now
time to begin pairing sensors.
Connecting the Hub
10
What’s Included?
Door/Window
Sensor Set
Pin
Mounting
Adhesive
*This may include one or more depending on the
package purchased. To purchase additional sensors,
visit us at amcrest.com
Overview
Magnet
Battery
Slot
Sensor
LED
Indicator
Pin Insert
03
Door and
Window
Sensors
3. Follow the on-screen
prompts to finish pairing the
hub to your account.
1. Ensure the alarm hub is
powered on.
2. Wait until the LED on the
front of the hub is flashing
blue.

Pairing the Sensor
LED Behavior
Please refer to the table below for details regarding the
LED behavior of the device.
Specifications
Environment Indoor
Max Detection Distance Less than 3/4”
Operating 14°F ~ 113°F
Operating Humidity 0-95% RH
Battery CR1632
Protocol Bluetooth 5.0
WARNING: CHOKING HAZARD
KEEP OUT OF REACH OF CHILDREN.
!11 12
1. Locate the Alarm Hub on
the main menu.
2. Tap on the “+” icon to pair
the sensor to the hub.
3. Follow the on-screen
prompts to finish pairing the
sensor.
4. Test the sensor by moving
the small magnetic portion
along the right side of the
sensor. The LED on the
sensor will flash once it has
detected motion.
Note: It is recommended to keep the small
magnetic portion 3/4” away from the sesnor.
Do not place the small magnetic portion
directly on the sensor.
Behavior Description
Flashing Rapidly
Solid (for 2 seconds)
Sensor is pairing.
Pairing successful
Flashing (3 times) Pairing failed.
**Try repeating setup.
Flashing Rapidly
(after pairing) Alarm has been triggered.
Steady Flash Firmware upgrade.

3/4 ”
Installing the Sensor
Location tips:
• Install the sensor in an indoor environment.
• If you are using a door, place the sensor at the top of your
door to prevent it from being bumped and out of reach of
children or pets.
•The sensor and magnet must be in line with each other and
no more than 3/4” apart.
1. Choose an area for the sensor to be
placed such as a window or door.
2. Ensure that the bluetooth connection
is steady to the hub before mounting.
IMPORTANT: Install the magnet to the right of the sensor.
4. Open and close the door or window
to ensure the sensor stays in place.
Note: For more information on how
to change the battery, please visit
amcrest.com/support
14
Pin
PIR Sensor
Bracket (Optional)
Mounting Adhesive
*May include one or more depending on the package
purchased.
To purchase additional sensors, visit us at amcrest.com
What’s Included?
Battery Slot
PIR Sensor
LED Indicator
Pin Insert
Overview
04
Motion
Sensors
13
Pin
3. Peel the mounting adhesive and
stick it to the back of the sensor. Peel
the other portion of the adhesive and
stick it to the mounting surface. Repeat
this step for the magnet portion.

Pairing the Sensor
Note: An Amcrest Smart Home camera
can be linked to either sensor if needed.
For more information, please visit
amcrest.com/support
15 16
Specifications
LED Behavior
Please refer to the table below for details regarding the
LED behavior of the device.
Environment Indoor
Max Detection Distance 26 feet
Operating Temperature 14°F ~ 113°F
Operating Humidity 0-95% RH
Battery CR2450
Protocol Bluetooth 5.0
Max Detection Angle 110°
WARNING: CHOKING HAZARD
KEEP OUT OF REACH OF CHILDREN.
!
Behavior Description
Flashing Rapidly
Solid (for 2 seconds)
Sensor is pairing.
Pairing successful
Flashing (3 times) Pairing failed.
**Try repeating setup.
Flashing Rapidly
(after pairing) Alarm has been triggered.
Steady Flash Firmware upgrade.
1. Locate the Alarm Hub on
the main menu.
2. Tap on the “+” icon to pair
the sensor to the hub.
3. Follow the on-screen
prompts to finish pairing the
sensor.

Install Using the Mounting Bracket
The bracket offers two separate angles for the sensor to face.
Use the included two-sided mounting adhesive to install the
sensor to the bracket.
1. Peel one portion of the circular mounting
adhesive and adhere it to the center portion
of the sensor.
2. Peel the other portion of the circular
mounting adhesive and adhere it to the back
of the bracket.
3. Place another mounting adhesive to
the bracket to achieve the desired angle.
4. Peel the other portion of the
mounting adhesive and place the
bracket onto a flat surface.
Installing the Motion Sensor
Location Tips:
•Install the motion sensor indoors on a
flat surface.
110°
26 ft
•The motion sensor should be placed 6
to 8 feet high to prevent it from falling
and out of reach of children or pets.
•To detect smaller objects, it is
recommended to use one of the angled
sides of the bracket.
1. Peel one portion of the circular
mounting adhesive and adhere
it to the center portion of the
sensor.
2. Peel the other portion of the
mounting adhesive and adhere
it to a flat surface.
Use the included two-sided mounting adhesive to
install the sensor.
Install Using the Mounting Adhesive
Note: The sensor can be placed on
a table or at a 45° angle using the
included bracket.
17 18
Note: An Amcrest Smart Home camera
can be linked to either sensor if needed.
For more information, please visit
amcrest.com/support

Online Quick Start Guide
amcrest.com/support
Need help?
[email protected]
How can we help?
We are dedicated to providing the highest quality
support to our customers and are available 7 days
a week.
20
• The hub should be installed indoors on
a flat surface.
• The hub must be connected to a
power source to operate.
• Ensure the hub is installed within range
of the sensors and the Wi-Fi router.
Installing the Hub
1. Choose a central area for
the hub to be placed.
RESET
2. Twist the supplied bracket
clockwise from the back of
the hub. Be sure to follow the
“UP” direction.
3. Peel the bracket’s
adhesive and place it on the
hub.
Note: Install the hub
close to an electrical
outlet.
05
Alarm Hub
Physical
Installation
4. Peel the other side of the
adhesive and place the hub
to the desired surface area.
19