AMD IonCleanse Solo User manual

Solo
Total Body Detoxification
®
Operating Instructions
TM

2
Solo
Table of Contents
Disclaimer.....................................................................3
The IonCleanse®Solo System................................... 4
Contraindications....................................................... 4
Instructions for Use....................................................7
Manual Polarity Override.................................. 8
Increasing Conductivity...................................... 8
Recommended Usage and Settings.......................9
What to Expect from a Session.................................10
Colors and Particles in the Water.......................10
Regional Toxicity..................................................10
Additives in the Water Supply..............................11
Color Chart.........................................................12
How the IonCleanse®System Works....................... 13
Care of Your IonCleanse®Unit.................................14
Plate Counter..............................................................15
Metal Plate Replacement.........................................16
Metal Plate Replacement Instructions...............16
Metal Plate Replacement Diagram....................17
Alarm Messages.........................................................18
Limited Warranty Information.................................22
Limits and Exclusions................................................20
Technical Specifications...........................................21
FCC Compliance Statement.....................................22

3
Disclaimer
Thank you for incorporating the IonCleanse®Solo®by AMD in
your health maintenance program. The IonCleanse®System is not
intended to treat, prevent, cure, or diagnose any disease.
The IonCleanse®Total Body Detoxification is a comprehensive
health and wellness system, and the information provided by
A Major Dierence (“AMD”) is solely for use as part of a self-
improvement program. None of the information provided is
intended to act as a substitute for medical counseling, nor does it
involve the diagnosis, prognosis, or prescription of remedies for the
treatment or prevention of any disease.
Please read this manual carefully before you start IonCleanse®
sessions. The information it contains will help you understand the
science behind the unit and enable you to eectively answer most
client questions.

Contraindications
4
Solo
The IonCleanse®Solo™System
Today, we are exposed to the greatest toxic load in the history of our
planet. Ongoing periodic cleansing is essential to maintain health.
The IonCleanse®system, in combination with a healthy, low-stress
lifestyle, provides a thorough and ecient way to maintain high
energy levels and long-term wellness.
Any person falling into one or more of these categories should NOT
use the IonCleanse®by AMD:
• Wearers of a pacemaker, or any other battery operated or
electrical implant.
• Pregnant or nursing women.
• Those on heartbeat regulating medication and/or blood
thinners.
• Organ transplant recipients.
• Those on medication, the absence of which would cause
mental or physical impairment, such as psychotic episodes,
seizures, etc.

5
Furthermore, the following recommendations should be strongly
considered:
• Many medications require that a blood level be maintained
in order to be eective; e.g., blood pressure medication.
Schedule an IonCleanse®session just before the taking of
a medication so that the client can maintain proper blood
levels of their medication.
• Great care should be taken with reluctant or overly
skeptical clients who are suering from pathologies or are
entrenched in the allopathic system. These individuals do
not understand the alternative healing paradigm and are
not prepared to undergo the rigors of detoxification.
• Clients with low blood sugar should eat before receiving
a session.
• Clients who have had a substantial part of their colon
removed should start with reduced session times as one of
their main channels of elimination has been compromised.
• You can work with people who have non-electrical implants,
such as titanium pins, although a small few have found it
uncomfortable to be exposed to an electromagnetic field. In
the event of discomfort, discontinue the session.
• If you are ever in doubt or have questions regarding
the use of the IonCleanse®system with a client, contact
AMD at 303-755-0112 for assistance before detoxing.

6
Solo
Instructions for Use
1. Plug the array’s cord into the front of the IonCleanse®unit.
2. Plug one end of the power supply into the back of the
IonCleanse®unit and the other end into an outlet.
3. Position the array upright in 3-4 inches of warm water in
the plastic foot tub that came with your unit. Be sure that the
copper tube at the center of the array is covered with water.
Important Note: If you submerge the top of the array in water, the
connectors will corrode and you will need to replace the array cord
much sooner.
4. Have the client immerse their feet in the water and turn on
the unit.
5. Press the “Start” key.
6. If necessary, press the (+) or (-) key to increase or decrease
the session time from the default 30-minute setting. Entering
more than 45 minutes will trigger a warning.
7. Press the “Start” key two more times to begin the session.
8. Add salt to the water only when indicated. Any salt other
than Epsom salt will work. Typically, 1/4 teaspoon is all that
is required.required.

77
START STOP
solo
DISPLAY
ARRAY JACK
POWER
SWITCH
KEYPAD

8
Solo
Manual Polarity Override
To manually override positive polarity output to the array, press (+)
while the unit is running; to manually override negative polarity
output to the array, press (-).
Increasing Conductivity
The conductivity of the water determines the amount of ionization
potential, which, in turn, determines the eectiveness of the session.
For our purposes, conductivity relates to the water’s ability to
transmit a small amount of current. All types of water, except
distilled water, have some degree of conductivity. Regardless of
your geographic location, the IonCleanse®by AMD removes all
guesswork as to the amount of salt you should add in order to
increase conductivity. If the unit shows less than 1.8 amps, add
a small amount of salt to the water in order to raise the water’s
conductivity.
Important note: Add as little salt as possible to the water in order to
maximize the life of the array. The less corrosive material in the water,
the longer the metal plates will last.
The optimum operating range of the IonCleanse®unit is between
11-20 volts, and 1.8-2.5 amps. Both of these readings are displayed
during an IonCleanse®session.

9
Recommended Usage and Settings
As a general rule, the maximum session frequency for clients under
50 years of age is once every other day. If a client experiences
fatigue, reduce session time and increase interval between sessions.
The maximum recommended session frequency for clients over 50
is once every third day.
• Clients with chronic conditions can consider cleansing every
other day without a break, as long as they don’t lose energy
or become uncomfortable.
• Children with special needs may start with 2 days on and
1 day o and adjust from there. Session times can range
from 10-30 minutes depending on age. Call AMD for more
information.
• 30 minutes is the maximum recommended session time for
adults.
If a client feels tired after a session or angry, panicky, etc., space the
sessions further apart. Fatigue indicates overstress, and emotional
upheaval indicates emotional toxins are being released along with
chemical toxins.

10
Solo
What to Expect from a Session
Healthy individuals can expect to feel lighter and to experience a
greater sense of well-being from each IonCleanse®session.
Colors and Particles in the Water
Many colors and particles will appear in the water during
IonCleanse®sessions. Color is produced even if there are no feet
in the water. This is a result of the interaction between toxins and
particles already in the water, any added salt, and the array metals.
This regional color depends on the toxic and chemical impurities in
the water of your geographical area.
Regional Toxicity
The IonCleanse®by AMD will neutralize toxins already in the water
the same way it neutralizes toxins in the body. The predominant
color of the ionized water is determined by the chemicals used
by the local water authorities, in combination with the pollutants
common to that area.
Chinese acupuncturists understand the concept of regional toxicity
as it relates to the ailments that are predominant in a given area.
Some areas of the country have higher joint complaints, while
others report higher frequencies of kidney/bladder problems. Could
it be that the toxins particular to an area gravitate to a specific part
of the body and cause it to break down?

11
As a general rule, regional toxins contribute 20 - 40 percent of the
residues found in the water after a footbath. Black flecks may be
created by heavy metals in the water as well as deterioration of
the metal in the array. Experience and the observations discussed
above will help you determine the residue coming from the client. It
is distinctly dierent from that of the array.
Additives in the Water Supply
The greater the concentration of minerals in the water, the greater
the ionization potential; however, chlorine, fluoride, and other
additives can reduce the ionization potential of the water because
they bond with the ions produced by the IonCleanse®system, thus
neutralizing them. This can result in little or no color change during
a session. If this happens, visit the troubleshooting section of our
website or call us for guidance.

12
Solo
Color Chart
We have found that a client’s detoxification session will override
the regional toxicity of the water. A session done with someone’s
feet in the water will produce more particles and residues than one
without. You will also find that water-based toxins will not stick to the
side of the bucket and array, whereas substances coming out of the
body will form a sticky ring that must be removed with a detergent
or scouring powder.
Based on EAV (Electro Acupuncture by Voll) testing, the following
table (Fig. 1) shows what we believe the colors in the water
represent.
Fig. 1
Color or Particle Meridian Influenced During the Session
Yellow-Green Kidneys, Bladder, Urinary Tract, Prostate
(Male) Meridians
Orange Joint Meridian
Brown Liver Meridian
Black Liver Meridian
Dark Green Gallbladder Meridian
White Foam Lymphatic Meridians
Black Flecks Heavy Metals
Red Flecks Meridians Governing Blood Flow

13
How the IonCleanse®System Works
The array is placed in the water with the hands, feet, or other body
parts. When turned on, the control unit delivers a clean, filtered
current to the array, which does two things. First, it elicits a relaxation
response in the body. Second, the current causes the array metals,
in combination with the water and salt, to generate positively and
negatively charged ions. These ions draw oppositely charged toxins
from the relaxed body into the water.
For the purpose of IonCleanse®discussions, positive and negative
relate to electrical, rather than chemical, phenomena. When the
IonCleanse®is set on positive, the current flows to the positive pole
in the array, which results in more negative ions being produced in
the water: 4H2O + 4e-__>
2H2+ 4OH-. In this polarity hydrogen gas
“smokes” from the array, and an abundance of negatively charged
ions are left in the water. Therefore, positive polarity generates a
negative ion concentration.
When the IonCleanse®is set on negative, the current flows to the
negative pole in the array, which results in more positive ions being
produced in the water: 2H2O __>
O2+ 4H++ 4e-. In this polarity oxygen
gas is released from the water, and an abundance of positively
charged ions are left in the water. Therefore, negative polarity
generates a positive ion concentration. This process is known as the
electrolysis of water.
Ionization is a familiar process. However, the concept of using
ionization in a foot bath, such as the IonCleanse®by AMD, is a
relatively new idea. In nature, ions are generated by the movement
of water molecules. Think of how good you feel while walking along a
beach or near a waterfall. We are creating the same reaction with the
IonCleanse®process, only magnified many times over.

14
Solo
Care of Your IonCleanse®Unit
The array housing is made of acrylic, which will attract and hold
debris from the baths. Clean your array between sessions with a
disinfectant such as a kitchen/bathroom cleaner, grapefruit seed
extract, or vinegar. We recommend that you soak your array in
an ascorbic acid solution every 10 sessions to remove any excess
corrosion. Please see instructions on the sample bag.
The life of your plates will vary depending on the amount of chlorine
and fluoride in the water and the acidity of your clients. Because
corrosion rates vary widely across the country, we cannot guarantee
the number of sessions that you will get from a set of plates.
In order to determine if your plates need to be changed, a physical
inspection is required. Refer to Figure 2 which shows the gradual
decomposition of the plates. The last picture in the series displays a
fully used set of plates.
Fig. 2
Call us at [phone] or visit our website at
www.amajordierence.com to order new plates and other
accessories.
0 Sessions
20 Sessions
10 Sessions
30 Sessions

15
Plate Counter
Your IonCleanse®Solo®is equipped with a Plate Counter. You can
use this counter to track the number of minutes your plates have
been used (similar to a “Trip Meter” in an automobile).
To reset the Plate Counter, press the STOP button on the keypad
while viewing the Main Screen. Press the “+” button to confirm the
reset, or “-“ to cancel.

16
Solo
Metal Plate Replacement
Your metal plate replacement kit contains:
1. Replacement plate assembly.
2. Attachment hardware: 2 1/2 inch bolt, copper tube, wing
nut, and a washer.
Metal Plate Replacement Instructions
1. Remove the black and white lead wires by gripping the blue
connectors. Do not remove the wires by pulling on the wire
itself.
2. Unscrew the wingnut on back of array and discard the nut
and washer.
3. Withdraw the 2½ inch bolt to release copper tube and
discard both.
4. Lay the unit on its back and pull o the plastic front plate.
5. Remove old metal plate assembly.
6. Insert new metal plate assembly so that the three tabs fit
into the three slots of the back panel.
7. Replace plastic front over new plate assembly so that the
three tabs fit into the three slots of the front plate. Make
sure the word “IonCleanse” is facing you and that the black
terminal on top of the array is on the left, and the white
terminal is on the right.

17
Metal Plate Replacement Diagram
8. Holding the copper tube in place between the plastic
panels, insert the long screw and tighten with the washer
and wingnut on the back.
9. Re-attach the electrical wires on top of the array. Make sure
you attach the black wire to the terminal marked “black”
and the white wire to the terminal marked “white.”

18
Solo
Alarm Messages
The unit is in constant self-diagnosis and shows a variety of
messages on the four-line display to warn of error conditions:
The machine has detected that the CR2 relay has failed. You will
need to return the unit to AMD for repair. Please call [phone]
for further instructions.
The machine has detected an unusually high internal temperature.
Ensure there is nothing blocking the fan or that the unit is not in
direct sunlight. Turn o the unit and wait 30 minutes to turn back on.
The machine has detected one of the following: the power pack
has failed, or the wrong power pack is plugged into the machine,
or the voltage regulator in the external power pack has failed, or
the normal 20-volt supply voltage has exceeded 22.1 volts for some
reason.
There is too much salt in the water. Empty the foot tub and add
fresh water. Add salt slowly to the water. Typically, ¼ teaspoon is the
most that is required. Be sure that the voltage does not drop below
11.

19
Limited Warranty Information
The IonCleanse®SoloTM comes with a three-year limited warranty.
AMD will repair the IonCleanse®unit with new or rebuilt parts, free
of charge, in the U.S.A. for five (3) years from the date of original
purchase in the event of a defect in materials or workmanship.
This warranty only covers failures due to defects in materials or
workmanship which occur during normal use. It does not cover
damage which occurs in shipment; failures which are caused
by products not supplied by AMD; or failures which result from
accident, misuse, abuse, neglect, mishandling, misapplication,
alteration or modification; service by anyone other than AMD or
damage that is attributable to acts of God.

20
Solo
Limits and Exclusions
There are no express warranties except as listed herein. This
warranty will be terminated if the seals located on the unit are
broken or the serial number on the back of the unit is altered,
defaced, or removed.
AMD shall not, in any case, be liable for medical expenses or
special, incidental, or consequential damages caused by defects,
failures, or malfunctions of any product, arising from breach of
warranty, breach of contract, negligence, tort or any legal theory.
All expressed and implied warranties, including the warranties of
merchantability and fitness for a particular purpose, are limited
to the applicable warranty period set forth above. Some states do
not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts,
therefore some of the above exclusions or limitations may not apply
to you.
This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.