American DJ DMX Operator II User manual

Please read before use
USER'S MANUAL
English
1 2 3 4 5 6 7 8
SPEED FADE TIME PAN TILT
1
2
3
4
5
6
8
7
9
10
11
12
Music /
Bankcopy
Auto/Del
0
30S
10 Min
0.1S
Page Select
FOG MACHINE
910 11 12 13 14 15 16
12345678
Page A
Page B
HEATING READY
Assign
Reverse
SCANNERS SCENES
Midi/Rec
Program
Chase 2
TAP/Display
Chase 4
FINE
Chase 6
Blackout
Auto
Manual
Music
Chase 1
Chase 3
MODE
Chase 5
BANK
BANK
00000000
American DJR

Contents
Features 1
Technical Specifications 41
General Instructions 2
1. Overview 3
2. Operation Guide 7
1.1 Front View 3
2.1 Program Enable 7
2.2 Programming Scenes 8
2.3 Programming Chases 17
2.8.2 Implementation 38
2.2.1 Scene Editing 11
2.2.2 Scanner Copy 12
2.2.3 Scene Copy 13
2.2.4 Delete a Scene 15
2.2.5 Delete all Scenes 15
2.2.6 Bank Copy 16
2.3.1 Program a bank of scenes into a Chase 18
2.4.1 Assign DMX channel 22
2.4.2 Reverse DMX channel 24
2.4.3 Fade Time/Assign Fade Time 26
2.4.4 Delete a scanner of DMX channel 27
2.4.5 Clear all DMX channels 28
2.4.6 Display DMX channel 28
2.3.2 Add a Step 18
2.3.4 Delete a Chase 21
2.3.5 Delete all Chases 21
2.6.1 Manual Mode 32
2.7.1 Manual Mode 35
2.7.2 Auto Mode 35
2.7.3 Music Mode 36
2.8.1 MIDI Channel Setting 37
2.6.2 Auto Mode 32
2.6.3 Music Mode 34
2.6 Running Scenes 32
2.4 Assign/Reverse DMX channel 22
2.5 Set Up a new Logo 30
2.7 Running Chases 35
2.8 MIDI Operation 37
2.9 Send File Dump 39
2.10 Receive File Dump 40
2.3.3 Delete a Step 20
1.2 Rear View 6
Improvement and changes to
specifications, design and this
manual, may be made at any time
without prior notice.
All rights reserved.
American DJR

Contents
Features 1
Technical Specifications 41
General Instructions 2
1. Overview 3
2. Operation Guide 7
1.1 Front View 3
2.1 Program Enable 7
2.2 Programming Scenes 8
2.3 Programming Chases 17
2.8.2 Implementation 38
2.2.1 Scene Editing 11
2.2.2 Scanner Copy 12
2.2.3 Scene Copy 13
2.2.4 Delete a Scene 15
2.2.5 Delete all Scenes 15
2.2.6 Bank Copy 16
2.3.1 Program a bank of scenes into a Chase 18
2.4.1 Assign DMX channel 22
2.4.2 Reverse DMX channel 24
2.4.3 Fade Time/Assign Fade Time 26
2.4.4 Delete a scanner of DMX channel 27
2.4.5 Clear all DMX channels 28
2.4.6 Display DMX channel 28
2.3.2 Add a Step 18
2.3.4 Delete a Chase 21
2.3.5 Delete all Chases 21
2.6.1 Manual Mode 32
2.7.1 Manual Mode 35
2.7.2 Auto Mode 35
2.7.3 Music Mode 36
2.8.1 MIDI Channel Setting 37
2.6.2 Auto Mode 32
2.6.3 Music Mode 34
2.6 Running Scenes 32
2.4 Assign/Reverse DMX channel 22
2.5 Set Up a new Logo 30
2.7 Running Chases 35
2.8 MIDI Operation 37
2.9 Send File Dump 39
2.10 Receive File Dump 40
2.3.3 Delete a Step 20
1.2 Rear View 6
Improvement and changes to
specifications, design and this
manual, may be made at any time
without prior notice.
All rights reserved.
American DJR

Read the instruction in thismanual carefully and thoroughly, as they give important
information regarding safety during use and maintenance. Keep this manual with
the unit, in order to consult it in the future. If the unit is sold or given to another
operator, make certain that it always has its manual, to enable the new owner to
read about its operation and re lative instructions.
This unit isNOT intended for home use.
After having removed thepackaging check that theunit is NOT damaged in any way.
If in doubt,DON'T use it and contactan authorized dealer.
Packaging material (plastic bags, polystyrenefoam, nails, etc.) MUST NOT be left
within children's reach, as itcan be dangerous.
This unit must only beoperated by adults. DO NOT allow children to tamperor play
with it.
NEVER use the unit under thefollowing conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 C or less than 2 C/35.6 F.
Protect the unit from excessive dryness or humidity (ideal conditions are between
35% and 80%).
DO NOTdismantle or modify the unit.
DO NOTmake any inflammable liquids, wateror metal objects enter theunit.
Should any liquid be spilledon the unit, DISCONNECT the power supply tothe unit
immediately.
STOP using the unit immediately In the event of serious operation problems and
either contact your localdealer for a checkor contact us directly.
DO NOTopen the unit--there areno user serviceable partsinside.
NEVER try to repair the unit yourself. Repairs by unqualified people could cause
damage or faulty operation.Contact your nearest dealer.
/113 F
Features General Instructions
Thank you for your purchase of this ADJ product.
This DMX OPERATOR II features include:
1 2
Warnings
Cautions
NOTE:
A knowledge of MIDI and DMX is required to fully utilize this unit.
192 DMX channels
12 scanners of 16 DMX channels
30 banks of 8 programmable scenes
6 chases of 240 programmed scenes from 30 banks
8 faders for manual control
All data can be sent or received between two units
and Fade Time sliders
Fade Time/Assign Fade Time
The scanners under control by Pan and Tilt jog wheels
Fine adjustment of the Pan and Tilt
Reverse DMX channels causing the faders to control the output reversely
Preview assigned or reversed DMX channels
8 CH./16 CH. mode for Assigned or Reversed DMX channels
Blackout master
Manual override
Built-in microphone for Music triggering
MIDI control over banks, chases and Blackout
LCD display
DMX polarity select
Power failure memory
Auto programs(scenes and chases) under control by Speed(or Tap Sync)

Read the instruction in thismanual carefully and thoroughly, as they give important
information regarding safety during use and maintenance. Keep this manual with
the unit, in order to consult it in the future. If the unit is sold or given to another
operator, make certain that it always has its manual, to enable the new owner to
read about its operation and re lative instructions.
This unit isNOT intended for home use.
After having removed thepackaging check that theunit is NOT damaged in any way.
If in doubt,DON'T use it and contactan authorized dealer.
Packaging material (plastic bags, polystyrenefoam, nails, etc.) MUST NOT be left
within children's reach, as itcan be dangerous.
This unit must only beoperated by adults. DO NOT allow children to tamper or play
with it.
NEVER use the unit under thefollowing conditions:
In places subject to excessive humidity.
In places subject to vibrations or bumps.
In places with a temperature of over 45 C or less than 2 C/35.6 F.
Protect the unit from excessive dryness or humidity (ideal conditions are between
35% and 80%).
DO NOTdismantle or modify the unit.
DO NOTmake any inflammable liquids, wateror metal objects enter theunit.
Should any liquid be spilledon the unit, DISCONNECT the power supply tothe unit
immediately.
STOP using the unit immediately In the event of serious operation problems and
either contact your localdealer for a checkor contact us directly.
DO NOTopen the unit--there areno user serviceable partsinside.
NEVER try to repair the unit yourself. Repairs by unqualified people could cause
damage or faulty operation.Contact your nearest dealer.
/113 F
Features General Instructions
Thank you for your purchase of this ADJ product.
This DMX OPERATOR II features include:
1 2
Warnings
Cautions
NOTE:
A knowledge of MIDI and DMX is required to fully utilize this unit.
192 DMX channels
12 scanners of 16 DMX channels
30 banks of 8 programmable scenes
6 chases of 240 programmed scenes from 30 banks
8 faders for manual control
All data can be sent or received between two units
and Fade Time sliders
Fade Time/Assign Fade Time
The scanners under control by Pan and Tilt jog wheels
Fine adjustment of the Pan and Tilt
Reverse DMX channels causing the faders to control the output reversely
Preview assigned or reversed DMX channels
8 CH./16 CH. mode for Assigned or Reversed DMX channels
Blackout master
Manual override
Built-in microphone for Music triggering
MIDI control over banks, chases and Blackout
LCD display
DMX polarity select
Power failure memory
Auto programs(scenes and chases) under control by Speed(or Tap Sync)

1. Overview 1. Overview
1. Scanner Buttons(1-12)
12 scanners of 16 DMX channels & fader control
Press a scanner button to turn on manual fader control. Press the scanner button
again to turn off fader control. The LED besides the button lights or goes out to
indicate this selection.
1.1 Front View 1.1 Front View
3 4
Scanners
Scanners
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
DMX channels
DMX channels
1-16
1-16
17-32
17-32
33-48
33-48
49-64
49-64
65-80
65-80
81-96
81-96
97-112
97-112
113-128
113-128
129-144
129-144
145-160
145-160
161-176
161-176
177-192
177-192
Fader control
Fader control
Off
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
LED
LED
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
1 2 3 4 5 6 7 8
SPEED FADE TIME PAN TILT
1
2
3
4
5
6
8 7
9
10
11
12
Music /
Bankcopy
Auto/Del
0 30S
10 Min
0.1S
Page Select
FOG MACHINE
910 11 12 13 14 15 16 12345678
Page A
Page B
HEATING READY
Assign
Reverse
SCANNERS SCENES
Midi/Rec
Program
Chase 2
TAP/Display
Chase 4
FINE
Chase 6
Blackout
Auto
Manual
Music
Chase 1
Chase 3
MODE
Chase 5
BANK BANK
00000000
528
13 14 15 16
311 12 6 7 9 10 20
17 18 19
1
4

1. Overview 1. Overview
1. Scanner Buttons(1-12)
12 scanners of 16 DMX channels & fader control
Press a scanner button to turn on manual fader control. Press the scanner button
again to turn off fader control. The LED besides the button lights or goes out to
indicate this selection.
1.1 Front View 1.1 Front View
3 4
Scanners
Scanners
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10
10
11
11
12
12
DMX channels
DMX channels
1-16
1-16
17-32
17-32
33-48
33-48
49-64
49-64
65-80
65-80
81-96
81-96
97-112
97-112
113-128
113-128
129-144
129-144
145-160
145-160
161-176
161-176
177-192
177-192
Fader control
Fader control
Off
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
On
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
LED
LED
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
1 2 3 4 5 6 7 8
SPEED FADE TIME PAN TILT
1
2
3
4
5
6
8 7
9
10
11
12
Music /
Bankcopy
Auto/Del
0 30S
10 Min
0.1S
Page Select
FOG MACHINE
910 11 12 13 14 15 16 12345678
Page A
Page B
HEATING READY
Assign
Reverse
SCANNERS SCENES
Midi/Rec
Program
Chase 2
TAP/Display
Chase 4
FINE
Chase 6
Blackout
Auto
Manual
Music
Chase 1
Chase 3
MODE
Chase 5
BANK BANK
00000000
528
13 14 15 16
311 12 6 7 9 10 20
17 18 19
1
4

13. Auto/Del Activates Auto mode or to delete scenes or chases.
1. Overview1. Overview
2. Scene Buttons
3. Faders
4. Page Select Button
5. Fog Machine Button
6. Speed Slider
7. Fade Time Slider
8. LCD Display
9. Pan Wheel
10. Tilt Wheel
11. Program Button
14. Music/Bank Copy
15. Bank Up/Down
16. Tap/Display
17. Blackout Button
18. Chase Buttons(1-6)
19. Fine Button
20. Mode Button
2. MIDI IN
4. DMX Out
5. DMX In
6. Fog Machine Connector
7. DC Input
8. Power Switch
3. DMX Polarity Select
There are a maximum of 240 programmable scenes.
Receives MIDI data.
Used to select DMX polarity.
or DMX pack.
This connector accepts your DMX input signals.
This connector is used to plug in the Fog Machine.
DC 9 -12V, 300mA min.
This switch turns On/Off the power.
This connector sends your DMX value to the DMX scanner
or channel 9-16 depending upon the selected page.
Used to select page between Page A(1-8) and Page B(9-16).
Activates Fog Machine .
to 10 minutes.
another, for the dimmer to fade in or fade out.
Shows the current activity or programming state.
programming.
This jog wheel is used to control the pan of the scanner or for
programming.
Activates Program mode.
Activates Music mode or to copy a bank of scenes.
12. MIDI/Rec Used to control MIDI operation or to record programs.
Press the Up/Down button to select from 30 banks.
between % and 0-255.
Tap to momentarily pause whole output.
programmed scenes.
scanner in the smallest increment.
Pressing Fine and Mode buttons allows to activate Assign
or Reverse mode.
When Fine is on, the Pan or Tilt wheel will control the
These buttons are used for activating the chase of
Used to create a standard beat or to change the value mode
This jog wheel is used to control the Tilt of the scanner or for
it takes for a scanner(or scanner) to move from one position to
Used to adjust the fade time. Fade time is the amount of time
Used to adjust the chase speed within the range of 0.1 second
These faders are used to control the intensity of channel 1-8
Press the scene buttons to load or stored your scenes.
1.2 Rear View1.1 Front View
5 6
+
1
234567
DMX OUT
DMX Polarity Select
12
3
1=Ground
2=Data +
3=Data
1=Ground
2=Data
3=Data +
FOG
MACHINE
DC INPUT
DC 9V - 12V
300mA min.
+
MIDI INAUDIO DMX OUT DMX IN
1 1
2 2
3 3
POWER
ON OFF
0.1V~1Vp-p
8
1. AUDIO IN 0.1V~1Vp-p.

13. Auto/Del Activates Auto mode or to delete scenes or chases.
1. Overview1. Overview
2. Scene Buttons
3. Faders
4. Page Select Button
5. Fog Machine Button
6. Speed Slider
7. Fade Time Slider
8. LCD Display
9. Pan Wheel
10. Tilt Wheel
11. Program Button
14. Music/Bank Copy
15. Bank Up/Down
16. Tap/Display
17. Blackout Button
18. Chase Buttons(1-6)
19. Fine Button
20. Mode Button
2. MIDI IN
4. DMX Out
5. DMX In
6. Fog Machine Connector
7. DC Input
8. Power Switch
3. DMX Polarity Select
There are a maximum of 240 programmable scenes.
Receives MIDI data.
Used to select DMX polarity.
or DMX pack.
This connector accepts your DMX input signals.
This connector is used to plug in the Fog Machine.
DC 9 -12V, 300mA min.
This switch turns On/Off the power.
This connector sends your DMX value to the DMX scanner
or channel 9-16 depending upon the selected page.
Used to select page between Page A(1-8) and Page B(9-16).
Activates Fog Machine .
to 10 minutes.
another, for the dimmer to fade in or fade out.
Shows the current activity or programming state.
programming.
This jog wheel is used to control the pan of the scanner or for
programming.
Activates Program mode.
Activates Music mode or to copy a bank of scenes.
12. MIDI/Rec Used to control MIDI operation or to record programs.
Press the Up/Down button to select from 30 banks.
between % and 0-255.
Tap to momentarily pause whole output.
programmed scenes.
scanner in the smallest increment.
Pressing Fine and Mode buttons allows to activate Assign
or Reverse mode.
When Fine is on, the Pan or Tilt wheel will control the
These buttons are used for activating the chase of
Used to create a standard beat or to change the value mode
This jog wheel is used to control the Tilt of the scanner or for
it takes for a scanner(or scanner) to move from one position to
Used to adjust the fade time. Fade time is the amount of time
Used to adjust the chase speed within the range of 0.1 second
These faders are used to control the intensity of channel 1-8
Press the scene buttons to load or stored your scenes.
1.2 Rear View1.1 Front View
5 6
+
1
234567
DMX OUT
DMX Polarity Select
12
3
1=Ground
2=Data +
3=Data
1=Ground
2=Data
3=Data +
FOG
MACHINE
DC INPUT
DC 9V - 12V
300mA min.
+
MIDI INAUDIO DMX OUT DMX IN
1 1
2 2
3 3
POWER
ON OFF
0.1V~1Vp-p
8
1. AUDIO IN 0.1V~1Vp-p.

11
2. Operation Guide2. Operation Guide
2.1 Program Enable
2.2 Programming Scenes
Program
MIDI/Rec
1. Enter Program mode.
2. Press the Scanner button to turn on its fader
control, which is indicated by the lit LED.
You may select several scanners at a time
by tapping of these Scanner buttons, so you
can set several scanners at a time.
3. Move the faders to select your desired dimmer
intensity if you are using a dimmer.
You can also use the two jog wheels to control
the Pan or Tilt movement of the scanner.
4. If necessary , you may tap the Page Select
button to control the second set of 8 DMX
channels.
5. Once the scene is satisfactory, tap the MIDI/Rec
button to program this scene into memory.
78
General
Display Information
This unit allows you to program 12 scanners of 16 DMX channels, 30 banks of 8
programmable scenes, 6 chases of 240 programmed scenes using 8 faders and
other function buttons. With the use of two jog wheels, you may easily control the
Pan or Tilt of the scanners. To tailor your special effect lighting, this unit enables
you to Assign or Reverse the DMX channels. In addition, two units can set up
communication so that they can send or receive file dump.
The LCD Display contains a maximum of 2x8 characters.
When the power is turned on, this unit enters
Manual mode automatically.
Press the Program button for three seconds to
activate Program mode, the LED near to this
button lights indicating Program in active.
Scanner buttons 1-12
LCD Display Message
CHASE 5
STEP 002
DATA 151
SP: 1M36S
TP: 5.32S
FT: 10.5S
ASS 07 08
RES 10 13
SN 6
BK 03
Chase 5 is activated.
The 2nd step of a chase
DMX value(000-255)
The current speed is 1 minute and 36 seconds
The time of the last two taps is 5.32 seconds
Fade Time is 10.5 seconds
Assign DMX channels 7 and 8
Reverse DMX Channels 10 and 13
Scene 6
Bank 03

11
2. Operation Guide2. Operation Guide
2.1 Program Enable
2.2 Programming Scenes
Program
MIDI/Rec
1. Enter Program mode.
2. Press the Scanner button to turn on its fader
control, which is indicated by the lit LED.
You may select several scanners at a time
by tapping of these Scanner buttons, so you
can set several scanners at a time.
3. Move the faders to select your desired dimmer
intensity if you are using a dimmer.
You can also use the two jog wheels to control
the Pan or Tilt movement of the scanner.
4. If necessary , you may tap the Page Select
button to control the second set of 8 DMX
channels.
5. Once the scene is satisfactory, tap the MIDI/Rec
button to program this scene into memory.
78
General
Display Information
This unit allows you to program 12 scanners of 16 DMX channels, 30 banks of 8
programmable scenes, 6 chases of 240 programmed scenes using 8 faders and
other function buttons. With the use of two jog wheels, you may easily control the
Pan or Tilt of the scanners. To tailor your special effect lighting, this unit enables
you to Assign or Reverse the DMX channels. In addition, two units can set up
communication so that they can send or receive file dump.
The LCD Display contains a maximum of 2x8 characters.
When the power is turned on, this unit enters
Manual mode automatically.
Press the Program button for three seconds to
activate Program mode, the LED near to this
button lights indicating Program in active.
Scanner buttons 1-12
LCD Display Message
CHASE 5
STEP 002
DATA 151
SP: 1M36S
TP: 5.32S
FT: 10.5S
ASS 07 08
RES 10 13
SN 6
BK 03
Chase 5 is activated.
The 2nd step of a chase
DMX value(000-255)
The current speed is 1 minute and 36 seconds
The time of the last two taps is 5.32 seconds
Fade Time is 10.5 seconds
Assign DMX channels 7 and 8
Reverse DMX Channels 10 and 13
Scene 6
Bank 03

2.2 Programming Scenes2.2 Programming Scenes
2. Operation Guide2. Operation Guide
6. Tap the Bank Up/Down button to select the bank
you want to store your scene into. There are total
30 banks you can select, you may store up to 8
scenes into each bank.
SCENE BUTTONS 1-8
7. Tap the Scene button to store your scene, all
LEDs and the Segment Display will flash three
times briefly indicating this operation, then the
LCD will show the bank and the scene.
8. Repeat steps 3-7until all desired scenes
have been programmed into memory.
Tap the Scanner button again to turn off
its fader control.
To set another scanner(scanner), you may tap
the corresponding Scanner button to turn on
its fader control, then you may begin your
programming again.
9. If you don't intend to continue your programming,
press and hold down the Program button for three
seconds to exit Program mode, the LED goes out
indicating this selection.
EXAMPLE: Program 8 scenes with channel 1-8 at full in sequence into
bank 2 and assign these scenes to scanner 2.
1. Program enable.
2. Tap the Scanner 2 button to turn on its fader control.
3. Tap the Page Select button to select Page A.
4. Push Fader 1 to the top position.
5. Tap the MIDI/Rec button.
6. Select bank 2 using Bank Up/Down button.
7. Tap the Scene 1 button to store the first scene.
8. Repeat steps 4-7 until all 8 scenes have been programmed into bank 2.
9. Tap the Scanner 2 button again to turn off its fader control.
10. Press the Program button for 3 seconds to exit Programming mode.
910
BANK
Scanner buttons 1-12
Program

2.2 Programming Scenes2.2 Programming Scenes
2. Operation Guide2. Operation Guide
6. Tap the Bank Up/Down button to select the bank
you want to store your scene into. There are total
30 banks you can select, you may store up to 8
scenes into each bank.
SCENE BUTTONS 1-8
7. Tap the Scene button to store your scene, all
LEDs and the Segment Display will flash three
times briefly indicating this operation, then the
LCD will show the bank and the scene.
8. Repeat steps 3-7until all desired scenes
have been programmed into memory.
Tap the Scanner button again to turn off
its fader control.
To set another scanner(scanner), you may tap
the corresponding Scanner button to turn on
its fader control, then you may begin your
programming again.
9. If you don't intend to continue your programming,
press and hold down the Program button for three
seconds to exit Program mode, the LED goes out
indicating this selection.
EXAMPLE: Program 8 scenes with channel 1-8 at full in sequence into
bank 2 and assign these scenes to scanner 2.
1. Program enable.
2. Tap the Scanner 2 button to turn on its fader control.
3. Tap the Page Select button to select Page A.
4. Push Fader 1 to the top position.
5. Tap the MIDI/Rec button.
6. Select bank 2 using Bank Up/Down button.
7. Tap the Scene 1 button to store the first scene.
8. Repeat steps 4-7 until all 8 scenes have been programmed into bank 2.
9. Tap the Scanner 2 button again to turn off its fader control.
10. Press the Program button for 3 seconds to exit Programming mode.
910
BANK
Scanner buttons 1-12
Program

2.2.1 Scene Editing
2.2.2 Scanner Copy
2.2.1 Scene Editing
2. Operation Guide2. Operation Guide
1. Program enable.
4. Use the Faders or jog wheels to make your
desired adjustments.
5. Once you've made your changes, tap the
MIDI/Rec button.
6. Tap the Scene button that corresponds to the
scene you're editing. This will overwrite the
exited scene.
1. Press and hold down the Scanner button you
want to copy.
3. Select the scene you want to edit by tapping
its Scene button.
SCENE
MIDI/Rec
SCENE
11 12
2. Tap the Bank Up/Down button to select the bank
that contains the scene you wish to edit.
11
NOTE:
Be sure to select the same scene in steps 3 and 6, otherwise you may accidentally
record over an exited scene.
SCANNER
This function allows you to copy the settings
of one scanner to another.
BANK

2.2.1 Scene Editing
2.2.2 Scanner Copy
2.2.1 Scene Editing
2. Operation Guide2. Operation Guide
1. Program enable.
4. Use the Faders or jog wheels to make your
desired adjustments.
5. Once you've made your changes, tap the
MIDI/Rec button.
6. Tap the Scene button that corresponds to the
scene you're editing. This will overwrite the
exited scene.
1. Press and hold down the Scanner button you
want to copy.
3. Select the scene you want to edit by tapping
its Scene button.
SCENE
MIDI/Rec
SCENE
11 12
2. Tap the Bank Up/Down button to select the bank
that contains the scene you wish to edit.
11
NOTE:
Be sure to select the same scene in steps 3 and 6, otherwise you may accidentally
record over an exited scene.
SCANNER
This function allows you to copy the settings
of one scanner to another.
BANK

2. Operation Guide2. Operation Guide
2.2.2 Scanner Copy
2.2.3 Scene Copy
MIDI/Rec
1. Program enable.
2. While holding the Scanner button, tap the
Scanner button you want to copy to.
2.2.3 Scene Copy
5. Tap the MIDI/Rec button.
6. Tap the Scene button you wish to copy the
scene to.
1413
SCANNER
3. Select the scene you want to copy by tapping
its Scene button.
SCENE
SCENE
2. Tap the Bank Up/Down button to select the bank
that contains the scene you wish to copy.
4. Tap the Bank Up/Down button to select the bank
you wish to copy the scene to.
BANK
BANK

2. Operation Guide2. Operation Guide
2.2.2 Scanner Copy
2.2.3 Scene Copy
MIDI/Rec
1. Program enable.
2. While holding the Scanner button, tap the
Scanner button you want to copy to.
2.2.3 Scene Copy
5. Tap the MIDI/Rec button.
6. Tap the Scene button you wish to copy the
scene to.
1413
SCANNER
3. Select the scene you want to copy by tapping
its Scene button.
SCENE
SCENE
2. Tap the Bank Up/Down button to select the bank
that contains the scene you wish to copy.
4. Tap the Bank Up/Down button to select the bank
you wish to copy the scene to.
BANK
BANK

2. Operation Guide2. Operation Guide
2.2.4 Delete a Scene
2.2.5 Delete all Scenes
2.2.6 Bank Copy
This function will reset all DMX channel to 0 output.
1. Tap the desired Scene button to select the scene
you wish to delete.
2. Press and hold down the Auto/Del button.
While holding down the Auto/Del button, tap
the Scene button that stores the scene you
wish to delete.
When a programmed scene is deleted, all DMX
channel in this scene is set to 0.
1. With the power off, press and hold down the
Program and Bank Down buttons at a time.
2. Apply power again, all scenes should be cleared.
Program
1. Program enable.
1615
SCENE
SCENEAuto/Del
BANK
2. Tap the Bank Up/Down button to select the
bank you wish to copy.
4. Tap the Bank Up/Down button to select the
bank you wish to copy to.
MIDI/Rec
3. Tap the MIDI/Rec button.
BANK
BANK

2. Operation Guide2. Operation Guide
2.2.4 Delete a Scene
2.2.5 Delete all Scenes
2.2.6 Bank Copy
This function will reset all DMX channel to 0 output.
1. Tap the desired Scene button to select the scene
you wish to delete.
2. Press and hold down the Auto/Del button.
While holding down the Auto/Del button, tap
the Scene button that stores the scene you
wish to delete.
When a programmed scene is deleted, all DMX
channel in this scene is set to 0.
1. With the power off, press and hold down the
Program and Bank Down buttons at a time.
2. Apply power again, all scenes should be cleared.
Program
1. Program enable.
1615
SCENE
SCENEAuto/Del
BANK
2. Tap the Bank Up/Down button to select the
bank you wish to copy.
4. Tap the Bank Up/Down button to select the
bank you wish to copy to.
MIDI/Rec
3. Tap the MIDI/Rec button.
BANK
BANK

2. Operation Guide2. Operation Guide
2.2.6 Bank Copy
2.3 Programming Chase
2.3.1 Program a bank of scenes into a Chase
2.3.2 Add a Step
5. Tap the Music/Bank Copy button, all LEDs will
will flash three times briefly indicating the
function has been completed.
6. Press the Program button for three seconds to
exit Programming mode.
2. Tap the Chase button to select the chase to
program. Each time you can select a chase
only.
4. Tap the MIDI/Rec button.
5. Repeat steps 3-4 until you've reached your
desired effect.
You may record up to 240 scenes into a chase.
3. Select a desired scene from the bank that has
stored scenes.(described in Programming Scenes)
1. Program enable.
Music/Bank Copy
Chase Button 1-6
MIDI/Rec
1. Program enable.
2. Select the chase using Chase buttons 1-6.
3. Use Bank Up/Down button to select the bank
that contains the scenes you wish to copy.
4. Tap the Music/Bank Copy button.
5. Tap the MIDI/Rec Copy button, all LEDs will
flash three times briefly indicating all 8
scenes in this bank have been programmed
into this chase.
1. Program enable.
2. Select the chase you wish to add a step to.
3. Tap the Tap/Display button, the LCD shows
the current step.
Music/Bank Copy
MIDI/Rec
Tap/Display
1817
You must program scenes before you can program chases, this function
allows you to store up to 240 scenes into one chase.