American Dryer Corp. 24 VAC Phase 5 AD-320 User manual

American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: [phone] / Fax: [phone]
e-mail: [email protected]
www.amdry.com
062001MFM/calbert ADC Part No. 450113
AD-330/AD-320 Parts Manual
24 VAC Phase 5
1992 thru 2001

Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVEALLSAFETYPRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OFPURCHASE ____________________________ MODELNO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or theADCfactory. When orderingreplacement partsfrom thefactory,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number andserialnumberin addition to the description andpart number,sothat
your order is processed accurately and promptly.
Theillustrationson the following pagesmay not depict your particulardryer exactly. The illustrations areacomposite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must beobtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.

Table of Contents
AD-330 (3-Leg) Coin and Debit Card Control Doors Assemblies
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................4
AD-320 (3-Leg) Coin and Debit Card Control Doors Assemblies
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................5
AD-330 (3-Leg) OPL Control Door Assembly
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................6
AD-320 (3-Leg) OPL Control Door Assembly
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................7
AD-330 OPL Control Door Assembly
For Models Mfd. Between June 9, 2001 and November 28, 2001...........................................................8
AD-320 OPL Control Door Assembly
For Models Mfd. Between June 9, 2001 and November 28, 2001...........................................................9
AD-330 Debit Card Control Door Assembly
For Models Mfd. Between June 9, 2001 and November 28, 2001.........................................................10
AD-320 Debit Card Control Door Assembly
For Models Mfd. Between June 9, 2001 and November 28, 2001......................................................... 11
AD-330 Lint Door Assembly
For Models Mfd. as of June 9, 2001...................................................................................................12
AD-330 Lint Door Assembly
For Models Mfd. prior to June 9, 2001 ...............................................................................................13
AD-320 Lint Door Assembly
For Models Mfd. as of June 9, 2001...................................................................................................14
AD-320 Lint Door Assembly
For Models Mfd. prior to June 9, 2001 ...............................................................................................15
AD-330 Lint Drawer (Basket) Assembly .................................................................................................16
AD-320 Lint Drawer (Basket) Assembly .................................................................................................17

AD-330 Locking Lint Drawer (Basket) Assembly ....................................................................................18
AD-320 Locking Lint Drawer (Basket) Assembly ....................................................................................19
Single Hanke Coin, DMC Control Panel Assembly
For Domestic Single Coin (25¢) Models Mfd. as of January 12, 1996...................................................20
Single Coin, Coinco Microprocessor Control Panel Assembly
For Single Coin (25¢) Models Mfd. with Coinco Only prior to January 12, 1996 ....................................21
Dual Coin, Hanke Control Panel Assembly ...............................................................................................22
Coinco Dual Coin, (DMC) Control Panel Assembly
For Export Models Only ....................................................................................................................23
OPL Microprocessor (DMC) Control Panel Assembly ..............................................................................24
25¢ Coinco Coin Acceptor Component Listing
For Single Coin (25¢) Models Mfd. with Coinco Only prior to January 12, 1996 ....................................25
Coinco Dual Coin Acceptor Component Listing
For Export Models Only ...............................................................................................................26, 27
Hanke Microprocessor Coin Acceptor Listing ..........................................................................................28
Coin Vault Assembly ...............................................................................................................................29
DMC Control Box Assembly ..............................................................................................................30, 31
Upper Front Panel Assembly
For “Plastic Door”............................................................................................................................32
Lower Front Panel Assembly
For “Plastic Door”............................................................................................................................33
“Plastic” Main Door Assembly ................................................................................................................34
Main Door Switch Assembly For “Plastic” ...............................................................................................35
AD-330/320 Cold Rolled Steel (CRS) Door Top Front Panel.....................................................................36
AD-330/320 Cold Rolled Steel (CRS) Door Bottom Front Panel................................................................37
Main Door Cold Rolled Steel (CRS) Assembly .........................................................................................38
Main Door Switch Assembly For Cold Rolled Steel (CRS) Type Door .......................................................39
AD-330 Basket (Tumbler)/Support Assemblies....................................................................................40, 41

AD-320 Basket (Tumbler)/Support Assemblies....................................................................................42, 43
Basket (Tumbler) Brush Assembly ..........................................................................................................44
Temperature Sensor Probe Assembly ......................................................................................................45
Basket (Tumbler) Bearing Assembly ...................................................................................................46, 47
AD-330 Lint Drawer (Basket) Switch Assembly ......................................................................................48
AD-320 Lint Drawer (Basket) Switch Assembly ......................................................................................49
Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies ............................................................50, 51
AD-330 Gas Train Assembly
For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module .....52, 53
AD-330 Gas Valve Train Assembly
For Models Mfd. prior to April 17, 2000 ........................................................................................54, 55
AD-320 Gas Train Assembly
For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module .....56, 57
AD-320 Gas Valve Train Assembly
For Models Mfd. prior to April 17, 2000 ........................................................................................58, 59
Electric Oven Assembly .....................................................................................................................60, 61
Burner Box/Piping Assemblies ................................................................................................................62
ADS-330/ADS-320 Steam Damper Assembly ..........................................................................................63
Sail Switch Assembly ..............................................................................................................................64
Back Guard Assemblies ..........................................................................................................................65
Optional Gas Piping and Exhaust Ducting Kits..........................................................................................66
12-Rib 95” (J) Poly Belt Arrangement .....................................................................................................67
Bottom Exhaust Duct Assembly and Cabinet Hi-Limit ..............................................................................68
Electric Oven Component Chart ..............................................................................................................69
Step Down Transformer Usage Listing ....................................................................................................70
Additional Parts Available .......................................................................................................................71

4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 880199* 1 AD-330 (3-leg) oin ontrol Door Assembly omplete Less Locks
(includes illus. nos. 1 through 6)
880198 1 AD-330 (3-leg) Stainless Steel oin ontrol Door omplete Less Locks
(includes illus. nos. 1 through 6)
2 180315 1 AD-330 Lower Door Trim (29-11/16 length)
3 150310 5 #8 x 1/2 Phillips Pan Head A Screw
4 180316 1 AD-330 Upper Door Trim (29-11/16 length)
5 150310 5 #8 x 1/2 Phillips Pan Head A Screw
6 117605 5 Neoprene Sponge Tape (sold by the foot)
For Models Mfd. as of March 6, 1998
117602 5 Noise Suppressor Tape (sold by the foot)
For Models Mfd. prior to March 6, 1998
7 160040 2 A E® Lock Assembly ONLY
8 160140 - Key ONLY (key number XX4451)
* Specify color when ordering.
AD-330 (3-Leg) Coin and Debit Card Control Doors Assemblies
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

5
elephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 880193* 1 AD-320 (3-leg) oin ontrol Door Assembly omplete Less Locks
(includes illus. nos. 1 through 6)
880192 1 AD-320 (3-leg) Stainless Steel oin ontrol Door omplete Less Locks
(includes illus. nos. 1 through 6)
2 180315 1 AD-320 Lower Door Trim (29-11/16 length)
3 150310 5 #8 x 1/2 Phillips Pan Head A Screw
4 180316 1 AD-320 Upper Door Trim (29-11/16 length)
5 150310 5 #8 x 1/2 Phillips Pan Head A Screw
6 117605 5 Neoprene Sponge Tape (sold by the foot)
For Models Mfd. as of March 6, 1998
117602 5 Noise Suppressor Tape (sold by the foot)
For Models Mfd. prior to March 6, 1998
7 160040 2 A E® Lock Assembly ONLY
8 160140 - Key ONLY (key number XX4451)
* Specify color when ordering.
AD-320 (3-Leg) Coin and Debit Card Control Doors Assemblies
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 880936* 1 AD-330 (3-leg) OPL ontrol Door Assembly omplete Less Locks
(includes illus. nos. 1 through 6)
For Models Mfd. as of February 3, 1994
880196* 1 AD-330 (3-leg) OPL ontrol Door Assembly omplete Less Locks
(includes illus. nos. 1 through 6)
For Models Mfd. prior to February 3, 1994
880197 1 AD-330 (3-leg) Stainless Steel OPL ontrol Door omplete Less Locks
(includes illus. nos. 1 through 6)
2 180315 1 AD-330 Lower Door Trim (29-11/16 length)
3 150310 5 #8 x 1/2 Phillips Pan Head A Screw
4 180316 1 AD-330 Upper Door Trim (29-11/16 length)
5 150310 5 #8 x 1/2 Phillips Pan Head A Screw
6 117605 5 Neoprene Sponge Tape (sold by the foot)
For Models Mfd. as of March 6, 1998
117602 5 Noise Suppressor Tape (sold by the foot)
For Models Mfd. prior to March 6, 1998
7 160040 2 A E® Lock Assembly ONLY
8 160140 - Key ONLY (key number XX4451)
* Specify color when ordering.
AD-330 (3-Leg) OPL Control Door Assembly
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

7
elephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 880935* 1 AD-320 (3-leg) OPL ontrol Door Assembly omplete Less Locks
(includes illus. nos. 1 through 6)
For Models Mfd. as of February 3, 1994
880191* 1 AD-320 (3-leg) OPL ontrol Door Assembly omplete Less Locks
(includes illus. nos. 1 through 6)
For Models Mfd. prior to February 3, 1994
880189 1 AD-320 (3-leg) Stainless Steel OPL ontrol Door omplete Less Locks
(includes illus. nos. 1 through 6)
2 180315 1 AD-320 Lower Door Trim (29-11/16 length)
3 150310 5 #8 x 1/2 Phillips Pan Head A Screw
4 180316 1 AD-320 Upper Door Trim (29-11/16 length)
5 150310 5 #8 x 1/2 Phillips Pan Head A Screw
6 117605 5 Neoprene Sponge Tape (sold by the foot)
For Models Mfd. as of March 6, 1998
117602 5 Noise Suppressor Tape (sold by the foot)
For Models Mfd. prior to March 6, 1998
7 160040 2 A E® Lock Assembly ONLY
8 160140 - Key ONLY (key number XX4451)
* Specify color when ordering.
AD-320 (3-Leg) OPL Control Door Assembly
For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-330 OPL Control Door Assembly
For Models Mfd. Between June 9, 2001 and November 28, 2001
Illus. No. Part No. Qty.Description
1 883107* 1 AD-330 OPL Door Assembly omplete
(includes illus. nos. 1 through 6 and 8)
883108 1 AD-330 Stainless Steel OPL Door omplete
(includes illus. nos. 1 through 6 and 8)
2 180315 1 AD-330 Lower Door Trim (29-11/16 length)
3 150310 5 #8 x 1/2 Phillips Pan Head A Screw
4 180316 1 AD-330 Upper Door Trim (29-11/16 length)
5 150310 5 #8 x 1/2 Phillips Pan Head A Screw
6 117604 3 Neoprene Sponge Tape (sold by the foot)
7 150314 4 #10-32 x 1/2 TORX and Bin Head Machine Screw
8 117606 2 5/16 Thick Neoprene Sponge Tape
9 154011 4 #10-32 Multi-Thread U-Nut
* Specify color when ordering.