American Dryer Corp. AD-75THS User manual

AD-75THS
Parts Manual
AmericanDryerCorporation
88Currant Road
FallRiver,MA02720-4781
Telephone: [phone] / Fax: [phone]
E-mail:[e-mail]
031099MFM/cj ADCPartNo.450416

AD-75THS
Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OFPURCHASE ____________________________ MODELNO. __________________________________________
RESELLER’SNAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADCfactory. Whenordering replacementparts from the factory,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Pleasespecify the dryermodelnumber andserialnumberin additiontothedescriptionand partnumber, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANTNOTETOPURCHASER”
Informationmustbeobtainedfromyourlocalgassupplierontheinstructions
tobefollowedifthe user smells gas. Theseinstructionsmustbeposted in a
prominentlocationnearthedryer.
FORYOURSAFETY
Donot store or use gasolineor
otherflammablevaporsorliquids
inthevicinity ofthisoranyother
appliance.
POURVOTRESÉCURITÉ
Nepasentreposer ni utiliser d’essence
nid’autresvapeursouliquides
inflammablesdanslevoisinagedecet
appareiloude yout autre appareil.

Table of Contents
ControlDoorAssemblyWithoutTrim...................................................................................................... 2
ControlDoorAssemblyWithTrim .......................................................................................................... 3
Phase5OPLMicroprocessor Control PanelAssembly ........................................................................... 4
Phase5Coin Microprocessor Control PanelAssembly ........................................................................... 5
Phase5 Coin andOPLMicroprocessor Control BoxAssembly............................................................... 6
CoinVaultAssembly ............................................................................................................................... 7
DualTimerControlPanelAssembly .................................................................................................... 8, 9
DualTimerControlBoxAssembly ........................................................................................................ 10
FrontPanelAssembly ........................................................................................................................... 11
MainDoorAssembly ............................................................................................................................ 12
MainDoorSwitchHousing ................................................................................................................... 13
Basket(Tumbler)/SupportAssemblies ............................................................................................. 14, 15
DropLintDoorAssemblyWithoutTrim ................................................................................................ 16
DropLintDoorAssemblyWithTrim ..................................................................................................... 17
LintTrapAssembly ............................................................................................................................... 18
IdlerBearingAssembly ......................................................................................................................... 19
TumblerBearingAssembly .............................................................................................................. 20, 21
Non-ReversingTotally Enclosed, Fan-Cooled (T.E.F.C.)Motor MountAssembly ........................... 22, 23
ReversingTotally Enclosed, Fan-Cooled (T.E.F.C.)Motor MountAssembly
forALLGasandElectric Models ONLY .................................................................................. 24, 25
ReversingTotally Enclosed, Fan-Cooled (T.E.F.C.)Motor MountAssembly
forSteamModelsONLY ......................................................................................................... 26, 27
SensorBracketAssemblies ............................................................................................................. 28, 29
HotSurfaceIgnition(HSI) BurnerAssembly ................................................................................... 30, 31
ElectricOvenAssembly .................................................................................................................. 32, 33
ElectricOvenComponentApplicationChart ......................................................................................... 34
SailSwitchAssembly ............................................................................................................................ 35
Non-ReversingElectricRelayPanelAssembly....................................................................................... 36
MicroprocessorReversingRearControlBoxAssembly......................................................................... 37
AirOperatedSteamDamperAssembly........................................................................................... 38, 39
DualTimerReversingRearControlBoxAssembly ................................................................................ 40
OuterTop/Back GuardAssemblies
forGasand Electric ModelsONLY ................................................................................................ 41
BackGuardAssembly
forSteamModelsONLY ............................................................................................................... 42
CoinAcceptorsListing.......................................................................................................................... 43
TransformerUsageListing
forElectricModelsONLY.............................................................................................................. 44
StepDownTransformerUsageListing ................................................................................................. 45
AdditionalPartsAvailable ..................................................................................................................... 46

2
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Control Door Assembly Without Trim
Illus. No. Part No. Qty.Description
1 882052 1 ADC Logo ONLY
870011 1 Logo Double Adhesive Tape Kit ONLY
2 881045* 1 ControlDoor
(includes illus. nos. 2 and 3)
881046 1 Stainless Steel Control Door
(includes illus. nos. 2 and 3)
3 117604 4 Neoprene Sponge Tape (sold by the foot)
4 150300 4 #10 x 1/2” Hex Washer TEK Screw
5 102600 1 Control Door Rod Support Catch
6 102601 1 Control Door Retainer Clip
7 102502 1 Control Door Rod
8 160005 2 Turn Latch
* Specify color when ordering.

3
Telephone: [phone] Fax: [phone]
Control Door Assembly With Trim
Illus. No. Part No. Qty.Description
1 160015 1 High Security MK-100 Lock Assembly with Key
(for Coin Models Only)
160017 1 Special Dummy Lock ONLY
(for non-Coin Models Only)
160104 1 MK-100 Key ONLY
2 160016 1 Lock Cam ONLY
3 882052 1 ADC Logo ONLY
870011 1 Logo Double Tape Kit
4 800020* 1 High Security Control Door Assembly
(includes illus. nos. 4 through 7)
800144 1 Stainless Steel High Security Control Door Assembly
(includes illus. nos. 4 through 7)
5 180202 1 Top Trim Strip (Gray) with Lock Hole (38-1/4” length)
6 117603 3 Suppressor Tape/Gasket (sold by the foot)
7 150201 6 #10-32 x 1/4” Phillips Round Head Machine Screw
8 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw
9 102600 1 Control Door Rod Support Catch
10 102601 1 Control Door Rod Retainer Clip
11 102502 1 Control Door Support Rod
* Specify color when ordering.

4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No. Part No. Qty.Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-on Labels (English ONLY) ... Not Illustrated
112275 1 OPL Stick-on Labels ... Not Illustrated
(Spanish, Italian, and Hebrew)
112277 1 3-Language OPL Stick-on Labels ... Not Illustrated
(English, Spanish, and Hebrew)
112278 1 5-Language OPL Stick-on Labels ... Not Illustrated
(Italian, Dutch, French, German, and Chinese)
2 801255 1 Phase 5 Microprocessor Control Panel ONLY
801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
801206 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete (includes illus. nos. 1 through 6)
801207 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly
Complete (includes illus. nos. 1 through 6)
3 137222 1 Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY
137231 1 Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
824998 1 Phase 5 Battery Clip
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 150429 1 #10-16 x 1/2” TORX Head Crimptite Screw
150433 1 TORX Hand Driver
(for removal of TORX Head Screw)
7 136048 1 1/8-Amp (Slo Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).

5
Telephone: [phone] Fax: [phone]
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard Label Assembly
2 801213 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, and 6)
801229 1 Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 5, and 6)
801259 1 Coin Control Panel ONLY
801258 1 Coin Control Panel ONLY with Battery Bracket
3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Microprocessor Controller (computer) ONLY
824998 1 Phase 5 Battery Clip
5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 -------- 1 Coin Acceptor
(refer to Coin Acceptors Listing on page 43)
8* 137056 1 Optic Switch ONLY
9* 137023 1 Optic Switch Connector ONLY
10 137021* 3 Microprocessor Socket ONLY
880772 1 Single Coin Optical Switch Harness
824080 1 Dual Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool
11 136048 1 1/8-Amp (Slo Blo) Fuse
* For dual coin models double the quantity shown.
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).

6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 141403 1 Transformer - 24 VAC
(for ALL 380/416/480 volt Gas and Steam Models)
-------- 1 Transformer - 24 VAC
(for Electric Models Only)
(Refer to Transformer Usage Listing on page 44)
2 150300 2 #10 x 1/2” Hex Washer TEK Screw
3 120715 1 30-Position Terminal Block
4 150002 2 #6-32 x 1” Phillips Round Head Screw
5 151000 2 #6-32 Pal Nut
6 136057 * 1/2-Amp (Slo Blo) Fuse
7 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
8 136008 * Fuse Block/Strip ONLY
9 122641 1 15-Pin Microprocessor Connector
10 122706 * Socket ONLY
--- 112801 1 Pin/Socket Extraction Tool
* As required.
Phase 5 Coin and OPL Microprocessor Control Box Assembly

7
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 802112 1 Microprocessor Coin VaultAssembly Complete
(includes illus. nos. 1 through 6)
802117 1 Microprocessor Coin Vault ONLY
2 160028 1 Cam for 1/4 Turn Lock ONLY
3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4 Turn Coin BoxAssembly
(includes illus. nos. 2 through 5)
802019 1 1/4 Turn Coin Box ONLY without Face Plate
125915 1 High Security (Greenwald) Coin Box ONLY with Key
5 802018 1 1/4 Turn Coin Box Face Plate ONLY
6 152014 4 1/4-20 Free Spin Wash Nut
7 102502 1 Control Door Support Rod
8 102601 1 Control Door Rod Retainer Clip
9 102600 1 Control Door Rod Catch
* Specify key number when ordering.
Coin Vault Assembly

8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Dual Timer Control Panel Assembly

9
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocker Heat Selector Switch
3 824015 1 Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 21)
800051 1 Dual Timer Control Panel ONLY
4 131917 1 Push-to-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block
10 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
11 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
12 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw
13 131931 1 Dual Timer Relay - 24 VAC
14 151000 2 #6-32 Pal Nut
15 112050 1 Dual Timer Label ONLY
16 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw)
17 124103 2 Arrow Timer Knob
18 124025 1 60-Minute Timer - 24 VAC
19 124030 1 15-Minute Timer - 24 VAC
20 122602 1 9-Pin Connector ONLY
21 122700 8 Pin Terminal ONLY
--- 122801 1 Pin/Socket Extraction Tool
Dual Timer Control Panel Assembly

10
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Dual Timer Control Box Assembly
Illus. No. Part No. Qty.Description
1 122603 1 9-Pin Socket Connector
2 122701 8 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool
3 315010 1 9-Pin Connector Bracket
4 150300 2 #10 x 1/2” Hex Washer TEK Screw
5 150300 2 #10 x 1/2” Hex Washer TEK Screw
6 141403 1 Transformer - 24 VAC
(for ALL 380/416/480 volt Gas and Steam Models)
-------- 1 Transformer - 24 VAC
(for Electric Models Only)
(Refer to Transformer Usage Listing on page 44)
7 136008 * Fuse Block/Strip ONLY
8** 136057 * 1/2-Amp (Slo Blo) Fuse ONLY
9 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
10 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
11 120715 1 30-Position Terminal Block
12 151000 2 #6-32 Pal Nut
* As required.
** Check fuse rating for verification.

11
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 875302* 1 Right Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1, 2, 3, and 6)
875313 1 Stainless Steel Right Hand Insulated Front Panel Assembly Complete
(includes illus. nos. 1, 2, 3, and 6)
2 154215 2 5/32” Pop Rivet
3 170330 1 Friction Door Latch
4 150300 1 #10 x 1/2” Hex Washer TEK Screw
5 150309 8 #10-16 x 1/2” Hex Head TEK Crimptite Screw
6 121405 1 Rubber Grommet
* Specify color when ordering.
Front Panel Assembly

12
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
2 800448 4 12-1/2” Stainless Steel Main Door Hinge Assembly
3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw
4 152014 4 1/4-20 Free Spin Wash Nut
5 102349 1 Main Door Gasket
6 102212 1 20-7/16” Door Glass with (4) Holes
170730 1 Main Door Glass Adhesive (10.3 oz. cartridge)
7 150448 4 1/2” Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (Nylon) Spacer
9 150431 1 Main Door Latch Screw
(#10 x 7/16” Dome Hex Head)
Main Door Assembly

13
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 152013 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Single-Pole Door Switch
4 121028 2 Insulated Female Terminal
5 154281 2 3/8” Standard Nylon Spacer
6 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
7 153565 2 #6-32 x 1” Self Clinching Stud
8 313218 1 Main Door Switch Housing
9 150201 2 #10-32 x 1/4” Phillips Pan Head Machine Screw
10 121405 1 Rubber Grommet
Main Door Switch Housing

14
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler)/SupportAssemblies

15
Telephone: [phone] Fax: [phone]
Basket (Tumbler)/SupportAssemblies
Illus. No. Part No. Qty.Description
1* 800708 1 Basket (Tumbler) ONLY without Felt Collar
800857 1 Stainless Steel Basket (Tumbler) ONLY without Felt Collar
800816 1 Non-Reversing Basket (Tumbler) and SupportAssembly Complete
(includes illus. nos. 1 through 10)
800873 1 Stainless Steel Non-Reversing Basket (Tumbler) and SupportAssembly
Complete
(includes illus. nos. 1 through 10)
800819 1 Reversing Basket (Tumbler) and SupportAssembly Complete
(includes illus. nos. 1 through 10)
800876 1 Stainless Steel Reversing Basket (Tumbler) and SupportAssembly Complete
(includes illus. nos. 1 through 10)
2 150413 40 #10-16 x 1/2” TORX Head Crimptite Screw
150429 1 TORX Hand Driver
(for removal of TORX Head Screw)
3 301308 4 Basket (Tumbler) Rib ONLY
301408 4 Stainless Steel Basket (Tumbler) Rib ONLY
4 150500 1 5/16-18 x 3/4” Socket Button Head Screw
5 100905 4 3/8-16 x 37” Tie Rod
6 153004 4 3/8” Flat Washer
7 800613 1 Non-Reversing Basket (Tumbler) Support ONLY
800615 1 Reversing Basket (Tumbler) Support ONLY
8 152005 4 3/8” Hex Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
11 116000 1 Felt Collar ONLY
--- 401010 1 #847 Adhesive For Felt Collar
* Felt collar is not included and must be ordered separately.

16
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Drop Lint Door Assembly Without Trim
Illus. No. Part No. Qty.Description
1 160001 1 AD-100 Lock Assembly with Key (for Coin Models Only)
160103 1 AD-100 Key ONLY
800150 1 Knob Latch Kit Assembly
(includes illus. nos. 1 and 2)
160200 1 Knob Latch ONLY with 2 Screws (without cam)
160003 1 Dummy Lock ONLY (for Non-Coin Models)
160104 1 MK-100 Key ONLY (for Dummy Lock)
2 160008 1 Lock Cam for AD-100 and Dummy Lock
160009 1 Knob LatchAdjustable Cam ONLY
150425 1 #12-24 x 3/8” Round Head Machine Screw ONLY
(screw for Knob Latch Adjustable Cam)
3 157000 1 Drop Lint Door Spring
4 802104* 1 Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
882106 1 Stainless Steel Insulated Drop Lint Drawer Assembly
(includes illus. nos. 4 through 8)
5 150201 6 #10-32 x 1/4” Phillips Pan Head TEK Screw
6 117604 7 Neoprene Sponge Tape (sold by the foot)
7 150419 2 #6 x 1/2” Tamperproof TEK Screw
150418 1 Tamperproof Screw Hand Driver
8 108120 1 Chain for Drop Lint Door (10-1/2” length)
* Specify color when ordering.

17
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 160001 1 AD-100 Lock Assembly with Key (for Coin Models Only)
160103 1 AD-100 Key ONLY
800150 1 Knob Latch KitAssembly
(includes illus. nos. 1 and 2)
160200 1 Knob Latch ONLY with 2 Screws (without cam)
160003 1 Dummy Lock ONLY (for Non-Coin Models)
160104 1 MK-100 Key ONLY (for Dummy Lock)
2 160008 1 Lock Cam for AD-100 and Dummy Lock
160009 1 Knob LatchAdjustable Cam ONLY
150425 1 #12-24 x 3/8” Round Head Machine Screw ONLY
(screw for Knob Latch Adjustable Cam)
3 157000 1 Drop Lint Door Spring
4 800237* 1 Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
880229 1 Stainless Steel Insulated Drop Lint Drawer Assembly
(includes illus. nos. 4 through 8)
5 150201 6 #10-32 x 1/4” Phillips Pan Head TEK Screw
6 117604 7 Neoprene Sponge Tape (sold by the foot)
7 117603 3 Suppressor Tape/Gasket (sold by the foot)
8 180212 1 Mid Trim/Kick Plate - Gray (8-1/4” length)
9 150419 2 #6 x 1/2” Tamperproof TEK Screw
150418 1 Tamperproof Screw Hand Driver
10 108120 1 Chain for Drop Lint Door (10-1/2” length)
* Specify color when ordering.
Drop Lint Door Assembly With Trim

18
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 800420 1 Non-Reversing and Reversing Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
850181 1 Non-Reversing and Reversing Lint Trap ONLY
2 154200 7 5/32” Pop Rivet
3 304101 1 Lint Screen Holder ONLY
4 150300 3 #10 x 1/2” Hex Washer TEK Screw
5 800506 1 Lint Screen ONLY
6 150419 2 #6 x 1/2” Tamperproof TEK Screw
7 108120 1 Chain for Drop Lint Door (10-1/2” length)
- 150418 1 Tamperproof Screw Hand Driver
Lint Trap Assembly