American Dryer Corp. AD-75V User manual

AD-75v
Parts Manual
AmericanDryerCorporation
88Currant Road
FallRiver,MA02720-4781
Telephone: [phone] / Fax: [phone]
E-mail:[e-mail]
www.amdry.com
081800JCARRITA/tcosta ADCPartNo.450430

AD-75v
Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OFPURCHASE ____________________________ MODELNO. __________________________________________
RESELLER’SNAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADCfactory. Whenordering replacementparts from the factory,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Pleasespecify the dryermodelnumber andserialnumberinaddition to thedescriptionandpartnumber,so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANTNOTETOPURCHASER”
Informationmustbeobtainedfromyourlocalgassupplierontheinstructions
tobefollowedifthe user smells gas. Theseinstructionsmustbeposted in a
prominentlocationnearthedryer.
FORYOURSAFETY
Donot store or use gasolineor
otherflammablevaporsand
liquidsinthevicinityofthisor
anyotherappliance.
POURVOTRESÉCURITÉ
Nepasentreposer ni utiliser d’essence
nid’autresvapeursouliquides
inflammablesàproximitédecet
appareiloude tout autreappareil.

Table of Contents
OPLControlDoorAssembly
ForModelsMfd.as of July 1, 2002......................................................................................................... 2
CoinControl DoorAssembly
ForModelsMfd.as of July 1, 2002......................................................................................................... 3
ControlDoorAssembly
ForModelsMfd.priortoJuly1,2002 ..................................................................................................... 4
Phase5 OPLMicroprocessor Control PanelAssembly ................................................................................. 5
Phase5CoinMicroprocessorControlPanelAssembly ............................................................................. 6,7
CoinandOPLControl BoxAssembly ........................................................................................................... 8
DualTimer“TapTouch” Controls
ForModels Mfd. as of November1,2000 .............................................................................................. 9
DualTimerControlPanelAssembly
ForModelsMfd.priortoNovember1,2000 ......................................................................................... 10
CoinVaultAssembly .................................................................................................................................. 11
FrontPanelAssembly
ForModelsMfd.withSteelLoadingDoors .......................................................................................... 12
MainDoor“Steel”Assembly
ForModelsMfd.withSteelLoadingDoors .......................................................................................... 13
MainDoorSwitchAssembly
ForModelsMfd.withSteelLoadingDoors .......................................................................................... 14
FrontPanelAssembly
ForModelsMfd.withPlasticLoadingDoors........................................................................................ 15
MainDoorAssembly
ForModelsMfd.withPlasticLoadingDoors........................................................................................ 16
MainDoorSwitch Housing
ForModelsMfd.withPlasticLoadingDoors........................................................................................ 17
Basket(Tumbler)/SupportAssemblies ........................................................................................................ 18
LintDrawer/LintDrawerSwitchAssembly ................................................................................................ 19
IdlerBearingAssembly ........................................................................................................................20,21
Basket(Tumbler)BearingAssembly
ForModelsMfd.withGriplockType Bearings.................................................................................22,23
Basket(Tumbler)BearingAssembly
ForModels Mfd. with Setscrew Type Bearings ...............................................................................24,25
Non-ReversingMotorMountAssembly .................................................................................................26,27
ReversingMotorMountAssembly .........................................................................................................28,29
SensorBracketAssemblies....................................................................................................................30,31
DirectSparkIgnition(DSI)BurnerAssembly ........................................................................................32,33
ElectricOvenAssembly ........................................................................................................................34,35
SailSwitchAssembly.................................................................................................................................. 36
Single-Phase(1ø)Motor,ElectricRelayPanelAssembly ............................................................................ 37
3-Phase(3ø) Motor, Electric Relay PanelAssembly ................................................................................... 38
460-480VAC3-Phase(3ø) Motor, Electric Relay PanelAssembly ............................................................. 39
ReversingElectricRelayPanelAssembly................................................................................................... 40
460-480VACReversingElectricRelayPanelAssembly ............................................................................. 41
Air-Operated SteamDamperAssembly .................................................................................................42,43
OuterTop/Back GuardAssemblies ............................................................................................................. 44
MicroprocessorCoinAcceptors Listing ...................................................................................................... 45
ElectricOvenComponentApplication Chart ............................................................................................... 46
AdditionalPartsAvailable ........................................................................................................................... 47

2
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
OPLControl DoorAssembly
For Models Mfd. as of July 1, 2002
Illus. No. Part No. Qty.Description
1 881053 1 ADC Logo ONLY (with double adhesive tape)
870011 1 Logo Double Tape Kit...Not Illustrated
2 883616 1 White Control Door
(includes illus. nos. 2 and 3)
883617 1 Coral Blue Control Door
(includes illus. nos. 2 and 3)
883618 1 Ivory Control Door
(includes illus. nos. 2 and 3)
3 117604 4 Noise Suppression Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX + BTN, Type 1
5 102603 1 Control Door Rod Support Catch
6 102601 1 Control Door Rod Retainer Clip
7 102503 1 Control Door Support Rod
8 150321 2 #10-32 x 1/2” Phillips Machine Screw
9 154011 2 #10-32 Multi-Thread U-Nut

3
Telephone: [phone] Fax: [phone]
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No. Part No. Qty.Description
1 160015 1 High Security LockAssembly
160104 1 Key ONLY
2 160016 1 Lock Cam ONLY
3 881053 1 ADC Logo with Tape
4 883621 1 White Control DoorAssembly with Black Trim
(includes illus. nos. 4 through 7)
883619 1 Ivory Control Door with BlackTrim
(includes illus. nos. 4 through 7)
883620 1 Coral Blue Control Door with Black Trim
(includes illus. nos. 4 through 7)
5 883485 1 Black Trim Strip with Lock Hole
6 117604 6 Noise Suppression Tape (sold by the foot)
7 152014 4 1/4-20 Free Spin Wash Nut
8 150317 2 #10-16 x 3/4” TORX + BTN, Type 1
9 102603 1 Control Door Rod Support Catch
10 102601 1 Control Door Rod Retainer Clip
11 102503 1 Control Door Support Rod

4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Control Door Assembly
For Models Mfd. prior to July 1, 2002
Illus. No. Part No. Qty.Description
1 160015 1 High Security MK-100 LockAssembly with Key
(for coin models Only)
160017 1 Special Dummy Lock ONLY
(for non-coin models Only)
160104 1 MK-100 Key ONLY
2 160052 1 Cam ONLY
3 881053 1 ADC Logo with Tape
870011 1 Double Sided Tape Kit...Not Illustrated
4 882751 1 White High Security Control DoorAssembly Less Lock
(includes illus. nos. 4 and 5)
882752 1 Almond “B” High Security Control DoorAssembly Less Lock
(includes illus. nos. 4 and 5)
882749 1 Coral Blue High Security Control DoorAssembly Less Lock
(includes illus. nos. 4 and 5)
882761 1 Bisque High Security Control DoorAssembly Less Lock
(includes illus. nos. 4 and 5)
5 117603 4 Noise Suppressor Tape (sold by the foot)
6 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 102603 1 Control Door Rod Support Catch
8 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
9 102502 1 Control Door Support Rod
10 102601 1 Control Door Rod Retainer Clip

5
Telephone: [phone] Fax: [phone]
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No. Part No. Qty.Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-On Labels (English Only)...Not Illustrated
112277 1 3-Language OPL Stick-On Labels...Not Illustrated
(English, Spanish, and Hebrew)
2 801255 1 Phase 5 Microprocessor Control Panel ONLY
801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
801206 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 5)
801207 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 5)
3 137222 1 Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY
137231 1 Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
824998 1 Phase 5 Battery Clip
4 153010 2 #6 Star Washer
5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
6 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
7 136048 1 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Checklabel oncomputerchiptoverify correct part numberforcontroller(computer).

6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Phase 5 Coin Microprocessor Control Panel Assembly

7
Telephone: [phone] Fax: [phone]
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard LabelAssembly
2 883537 1 Phase 5 Coin Control Panel Assembly
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
883538 1 Phase 5 Coin Control PanelAssembly with Battery Option
(for models mfd. as of June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
883582 1 Phase 5 Coin Control PanelAssembly with Battery Option
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
883581 1 Phase 5 Coin Control Panel Assembly
(for models mfd. prior to June 25, 2002)
(includes illus. nos. 1, 2, and 4 through 6)
883539 1 Coin Control Panel ONLY
(for models mfd. as of June 25, 2002)
883540 1 Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
883580 1 Coin Control Panel ONLY
(for models mfd. prior to June 25, 2002)
883579 1 Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002)
3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 137213 1 Phase 5 Coin Controller ONLY
824998 1 Phase 5 Battery Clip
5 153010 2 #6 Star Washer
6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
7 -------- 1 Microprocessor Coin Acceptor
(refer to the Microprocessor Coin Acceptors Listing on page 45)
8 -------- 1 Optic Switch ONLY
(refer to the Microprocessor Coin Acceptors Listing on page 45)
9 137023 1 Optic Switch Connector ONLY
10 137021 3 Microprocessor Socket ONLY
880772 1 Single Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
11 136048 1 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Checklabel oncomputerchiptoverify correct part numberofcontroller(computer).

8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Coin and OPL Control Box Assembly
Illus. No. Part No. Qty.Description
1 132002 1 Transformer
(for mechanical steam damper models - 208 VAC and higher Only)
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
3 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
4 131931 1 Steam Valve Relay - 24 VAC
(for mechanical steam damper models Only)
5 137035 1 Capacitor
(for mechanical steam damper models Only)
6 323583 1 Capacitor Bracket
(for mechanical steam damper models Only)
7 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
8 122641 1 15-Pin Microprocessor Controller (computer) Connector
9 122706 * Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool...Not Illustrated
10 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
11 132198 1 Reversing Timer 24V
(for reversing dual timer models mfd. as of November 1, 2000 Only)
* As required.

9
Telephone: [phone] Fax: [phone]
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 1, 2000
Illus. No. Part No. Qty.Description
1 824298 1 15 Minute Timer - 24 VAC
2 824299 1 60 Minute Timer - 24 VAC
3 824175 1 Red Pilot Light - 24 VAC
4 122301 1 “Tap Touch” Switch
5 131932 3 Relay SPST 24v
6 120730 1 30-Position Terminal Block
7 151000 6 #6-32 Pal Nut
8 882903 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
850392 - Dual Timer Panel ONLY
9 153010 2 #6 Star Washer
10 152000 3 #6-32 Hex Nut
11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
13 112563 1 Dual Timer Panel Overlay
14 124104 1 Pure Touch Knob with Red Pointer
15 124105 1 Pure Touch Knob with Blue Pointer

10
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Dual Timer Control PanelAssembly
For Models Mfd. prior to November 1, 2000
Illus. No. Part No. Qty.Description
1 123005 1 Red Indicator Light - 24 VAC
2 122400 1 Rocker Heat Selector Switch
3 882596 1 Non-Reversing Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 16)
882540 1 Non-Reversing Panel Wiring Harness...Not Illustrated
882600 1 Reversing Dual Timer Control PanelAssembly Complete - 24 VAC
(includes illus. nos. 1 through 17)
882573 1 Reversing Panel Wiring Harness...Not Illustrated
850456 1 Dual Timer Control Panel ONLY
4 131917 1 Push-To-Start Relay - 24 VAC
5 150207 2 #10-24 x 1/2” Round Head Machine Screw
6 154001 2 #10-24 Speed Nut
7 152000 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120730 1 30-Position Terminal Block
10 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
11 131932 1 Dual Timer Relay - 24 VAC
12 151000 2 #6-32 Pal Nut
13 112050 1 Dual Timer Label ONLY
14 124103 2 Arrow Timer Knob
15 124025 1 60 Minute Timer - 24 VAC
16 124030 1 15 Minute Timer - 24 VAC
17 132198 1 Reversing Timer - 24 VAC (reversing models Only)

11
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 802112 1 Microprocessor CoinVaultAssembly Complete
(includes illus. nos. 1 through 6)
802117 1 Microprocessor Coin Vault ONLY
2 160028 1 Cam ONLY for 1/4 Turn Lock
3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4Turn Coin BoxAssembly
(includes illus. nos. 2 through 5)
802019 1 1/4 Turn Coin Box ONLY without Faceplate
125915 1 High Security (Greenwald) Coin Box ONLY with Key
5 802018 1 1/4 Turn Coin Box Faceplate ONLY
6 152014 4 1/4-20 Free Spin Wash Nut
7 102502 1 Control Door Support Rod
8 102601 1 Control Door Rod Retainer Clip
9 102603 1 Control Door Rod Support Catch
* Specify key number when ordering.
Coin Vault Assembly

12
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Front PanelAssembly
ForModelsMfd.with SteelLoading Doors
Illus. No. Part No. Qty.Description
1 882905 1 White Front PanelAssembly
(includes illus. nos. 1, 5, and 6)
882901 1 Coral Blue Front PanelAssembly
(includes illus. nos. 1, 5, and 6)
882902 1 Ivory Front PanelAssembly
(includes illus. nos. 1, 5, and 6)
2 150313 11 #10-16 x 1/2” TORX + BTN, Type 1
150318 1 25 IP TORX + Bit 1/4 Hex (for removal of TORX head screw)
3 -------- 1 Main Door Hinge
(refer to Main Door “Steel” Assembly on page 13)
4 -------- 1 Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assembly on page 19)
5 881987 1 Friction Door Latch
(includes illus. nos. 5 and 6)
6 154215 2 5/32” Pop Rivet

13
Telephone: [phone] Fax: [phone]
Main Door “Steel”Assembly
ForModelsMfd.with SteelLoading Doors
Illus. No. Part No. Qty.Description
1 881150 1 Black Main DoorAssembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
3 881152 1 BlackTop Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge BlockAssembly
(includes illus. nos. 5 through 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass
(for models mfd. prior to February 8, 2001 and as of March 13, 2001)
102218 1 20-7/16” Door Glass with Notch and Four (4) Holes
(for models mfd. between February 8, 2001 and March 13, 2001)
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
16 151013 4 #10-32 Black NylonAcorn Nut
(for models mfd. between February 8, 2001 and March 13, 2001)

14
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
ForModelsMfd.with SteelLoading Doors
Illus. No. Part No. Qty.Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 FlagTerminal
6 881211 1 Black Main Door Switch Housing ONLY
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

15
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 882753 1 White Front PanelAssembly
(includes illus. nos. 1, 3, 5, and 6)
882754 1 Almond “B” Front PanelAssembly
(includes illus. nos. 1, 3, 5, and 6)
882755 1 Coral Blue Front PanelAssembly
(includes illus. nos. 1, 3, 5, and 6)
882756 1 Bisque Front PanelAssembly
(includes illus. nos. 1, 3, 5, and 6)
2 150309 11 #10-16 x 1/2” Hex Head TEK Crimptite Screw
3 121405 1 Rubber Grommet
4 -------- 1 Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assembly on page 19)
5 170330 1 Friction Door Latch
6 154215 2 5/32” Pop Rivet
Front Panel Assembly
ForModels Mfd.withPlastic LoadingDoors

16
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1 881422 1 Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
2 800448 1 12-1/2” Stainless Steel Main Door HingeAssembly
3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw
4 152014 4 1/4-20 Free Spin Wash Nut
5 102349 1 Main Door Gasket
6 102212 1 20-7/16” Door Glass with Four (4) Holes
170730 1 Main Door Glass Adhesive (10.3 oz. cartridge)...Not Illustrated
7 150448 4 1/2” Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (nylon) Spacer
9 150431 1 Main Door Latch Screw
(#10 x 7/16” dome hex head)
Main Door Assembly
ForModels Mfd.withPlastic LoadingDoors

17
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty.Description
1 152013 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Single-Pole Door Switch
4 121028 2 Insulated Female Terminal
5 154281 2 3/8” Standard Nylon Spacer
6 800448 1 12-1/2” Stainless Steel Main Door HingeAssembly
(includes illus. nos. 6 and 7)
7 153565 2 #6-32 x 1” Self-Clinching Stud
8 313218 1 Main Door Switch Housing
9 150201 2 #10-32 x 1/4” Phillips Pan Head Machine Screw
10 121405 1 Rubber Grommet
Main Door Switch Housing
ForModels Mfd.withPlastic LoadingDoors

18
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty.Description
1* 800708 1 Basket (tumbler) ONLY without Felt Collar
800857 1 Stainless Steel Basket (tumbler) ONLY without Felt Collar
800816 1 Basket (tumbler) and SupportAssembly Complete
(includes illus. nos. 1 through 10)
800873 1 Stainless Steel Basket (tumbler) and SupportAssembly Complete
(includes illus. nos. 1 through 10)
2 150313 40 #10-16 x 1/2” TORX Head Crimptite Screw
150429 1 TORX Hand Driver...Not Illustrated
(for removal of TORX head screw)
3 301308 4 Basket (tumbler) Rib ONLY
301408 4 Stainless Steel Basket (tumbler) Rib ONLY
4 150500 1 5/16-18 x 3/4” Socket Button Head Screw
(for models mfd. prior toApril 26, 2002)
5 100905 4 3/8-16 x 37” Tie Rod
6 153004 4 3/8” Flat Washer
7 800613 1 Basket (tumbler) Support ONLY
100724 1 1/4” x 1/4” x 1-1/4” Basket (tumbler) Support Key
(for models mfd. as of July 1, 2001)
100713 1 1/4” x 1/4” x 7/8” Basket (tumbler) Support Key
(for models mfd. prior to July 1, 2001)
8 152027 4 3/8-16 Nylon Insert Hex Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
11 116000 1 Felt Collar ONLY
401010 1 #847Adhesive for Felt Collar...Not Illustrated
12 115986 1 1/4” x 2” Felt Basket (tumbler) Pad
(for models mfd. as of May 20, 2002)
* Felt collar is not included and must be ordered separately.
Basket (Tumbler)/Support Assemblies