American Dryer Corp. AD-285 User manual

AD-285 Parts Manual
1987 thru 1991
AmericanDryerCorporation
88Currant Road
FallRiver,MA02720-4781
Telephone: [phone] / Fax: [phone]
e-mail:[e-mail]
www.amdry.com
ADCPartNo.450085

Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OFPURCHASE ____________________________ MODELNO. __________________________________________
RESELLER’SNAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADCfactory. When orderingreplacementparts fromthe factory,
you can FAX your order to ADC at [phone] or telephone your order directly to the ADC Parts Department at (508)
678-9000. Pleasespecifythedryermodelnumberandserialnumberin additionto thedescriptionand partnumber,so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANTNOTETOPURCHASER”
Informationmustbeobtainedfromyourlocalgassupplierontheinstructions
tobefollowedifthe user smells gas. Theseinstructionsmustbeposted in a
prominentlocationnearthedryer.
FORYOUR SAFETY
Donot store or use gasolineor
otherflammablevaporsand
liquidsinthevicinityofthisor
anyotherappliance.
POURVOTRESÉCURITÉ
Nepasentreposer ni utiliser d’essence
nid’autresvapeursouliquides
inflammablesàproximitédecet
appareiloude tout autreappareil.
AD-285

HighSecurityControlDoorAssembly ..................................................................................................... 3
Phase4.1SingleCoinMicroprocessor Control PanelAssembly
ForDirectSparkIgnition(DSI) Models Only..................................................................................... 4
Phase4.1SingleCoinMicroprocessor Control BoxAssembly
ForDirectSparkIgnition(DSI) Models Only...................................................................................... 5
Phase4.1DualCoin Microprocessor ControlPanelAssembly
ForDirectSparkIgnition(DSI) Models Only..................................................................................... 6
Phase4.1Dual Coin Microprocessor ControlBoxAssembly
ForDirectSparkIgnition(DSI) Models Only...................................................................................... 7
Phase4SingleCoinMicroprocessorControlPanel/BoxAssemblies
ForGlo-Bar®IgnitionModelsOnly................................................................................................. 8, 9
Phase4DualCoinMicroprocessorControl Panel/BoxAssemblies
ForGlo-Bar®IgnitionModelsOnly............................................................................................. 10, 11
Phase4OPLMicroprocessorControlPanelAssembly
ForDirectSparkIgnition(DSI) Models Only.................................................................................... 12
Phase4OPLMicroprocessorControlBoxAssembly
ForDirectSparkIgnition(DSI) Models Only.................................................................................... 13
Phase3OPLMicroprocessorControlPanelAssembly
ForGlo-Bar®IgnitionModelsOnly................................................................................................... 14
Phase3OPLMicroprocessorControlBoxAssembly
ForGlo-Bar®IgnitionModelsOnly................................................................................................... 15
DualTimerControlPanel/BoxAssemblies
ForDirectSparkIgnition(DSI) Models Only.............................................................................. 16, 17
DualTimerControlPanel/BoxAssemblies
ForGlo-Bar®IgnitionModels Only............................................................................................. 18, 19
Non-MicroprocessorCoinControlPanel/BoxAssemblies
ForDirectSparkIgnition(DSI)and Glo-Bar®IgnitionModels .................................................... 20, 21
CoinMeterReplacementParts ............................................................................................................. 22
CoinVaultAssembly ............................................................................................................................. 23
FrontPanelAssembly
Latch-Type....................................................................................................................................... 24
FrontPanelAssembly
Magnet-Type.................................................................................................................................... 25
MainDoorAssembly
Latch-Type....................................................................................................................................... 26
MainDoorAssembly
Magnet-Type.................................................................................................................................... 27
MainDoorSwitchAssembly
N.S. Series....................................................................................................................................... 28
Table of Contents

MainDoorSwitchAssembly
Plunger-Type .................................................................................................................................. 29
DropLint DoorAssembly ..................................................................................................................... 30
LintTrapAssembly ............................................................................................................................... 31
Basket(Tumbler)/SupportAssembly
Tapered Rib
For Models Mfd. as ofApril 18, 1991 ............................................................................................32
Basket(Tumbler)/SupportAssembly
StandardRib
For Models Mfd. prior toApril 18, 1991 ........................................................................................ 33
Basket(Tumbler)BearingAssembly ................................................................................................ 34, 35
IdlerBearingAssembly ................................................................................................................... 36, 37
Totally Enclosed, Fan-Cooled (T.E.F.C.) MotorMountAssembly
For60 Hz ModelswithTapered RibsOnly ............................................................................... 38, 39
Totally Enclosed, Fan-Cooled (T.E.F.C.) MotorMountAssembly
For60 Hz Modelswith StandardRibs Only .............................................................................. 40, 41
Totally Enclosed, Fan-Cooled (T.E.F.C.) MotorMountAssembly
For50 HzModels withTapered and Standard Ribs .................................................................. 42, 43
SensorBracketAssemblies ............................................................................................................. 44, 45
DirectSpark Ignition (DSI)BurnerAssembly .................................................................................. 46, 47
Hi/LoMicroprocessor BurnerAssembly
ForGlo-Bar®IgnitionModels Only........................................................................................... 48, 49
Non-Microprocessor(Standard)BurnerAssembly
ForGlo-Bar®IgnitionModels Only........................................................................................... 50, 51
SailSwitch/Hi-LimitAssembly ........................................................................................................ 52, 53
ReplacementCoilFor3/8”Hi/LoGasValve
ForGlo-Bar®IgnitionModels Only................................................................................................. 54
ReplacementCoilFor3/8” Non-Hi/Lo GasValve
ForGlo-Bar®IgnitionModels Only................................................................................................. 55
3-Phase(3Ø)Motor,ElectricRelayPanelAssembly
Telemecanique (208/230VACControls)......................................................................................... 56
3-Phase(3Ø)Motor,ElectricRelayPanelAssembly
Furnas(208/230VACControls)..................................................................................................... 57
Control/HeatStepDownTransformer
ForGlo-Bar®IgnitionModels Only................................................................................................. 58
OuterTop/Back GuardAssembly ......................................................................................................... 59
AdditionalPartsAvailable ..................................................................................................................... 60
MicroprocessorCoinAcceptorListing .................................................................................................. 61
WiringDiagrams ..............................................................................................................................62-83

450085-8 Telephone: [phone] / www.amdry.com 3
High Security Control Door Assembly
Illus. No. Part No. Qty.Description
1 160015 1 High Security MK-100 Lock Assembly ONLY with Key
160104 1 MK-100 Key ONLY
160017 1 Special Dummy Lock (noncoin models Only)
2 160016 1 Lock Cam ONLY
3 112350 1 ADC Logo ONLY
870011 1 Logo Double Tape Kit
4 800019* 1 High Security Control DoorAssembly Complete
(includes illus. nos. 4 through 7)
800143 1 Stainless Steel High Security Control DoorAssembly Complete
(includes illus. nos. 4 through 7)
5 180203 1 Top Trim Strip with Lock Hole (28-3/8” length)
6 102307 3 Trim Bumper Gasket (sold by the foot)
7 150201 4 #10-32 x 1/4” Phillips Round Head Machine Screw
8 150415 4 #10-16 x 1/2” Phillips Round Head Crimptite Screw
9 102600 1 Control Door Support Rod Catch
10 102601 1 Control Door Rod Retainer Clip
11 102503 1 Control Door Support Rod
* Specify color when ordering.

4 American Dryer Corporation 450085-8
Phase 4.1 Single Coin Microprocessor Control Panel Assembly
ForDirectSpark Ignition(DSI) Models ONLY
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard LabelAssembly
2 865098 1 Phase 4.1 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
865099 1 Phase 4.1 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
800040 1 Microprocessor Coin Control Panel ONLY
800039 1 Microprocessor Coin Control Panel ONLY with Battery Bracket
3 150415 1 #10-16 x 1/2” Phillips Round Head Crimptite Screw
4 137130 1 Phase 4.1 Coin Microprocessor Controller ONLY
137131 1 Phase 4.1 Coin Microprocessor Controller ONLY with Battery Clip
5 152001 4 #8-32 Hex Nut
6 153012 4 #8 Star Washer
7 -------- 1 Microprocessor Single CoinAcceptor with Optical Switch
(refer to Microprocessor Coin Acceptor Listing on page 61)
8 137056 1 Optical Switch ONLY
9 137023 1 Optical Switch Connector ONLY
10 137021 3 Microprocessor Socket ONLY
865050 1 Single Coin Optical Switch Harness
--- 122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.

450085-8 Telephone: [phone] / www.amdry.com 5
Phase 4.1 Single Coin Microprocessor Control Box Assembly
Illus. No. Part No. Qty.Description
1 137021 12 Microprocessor Socket ONLY
2 137020 1 15-Pin Microprocessor Connector ONLY
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
3 150315 1 #6 x 3/8” Phillips Pan Head Screw
4 137022 1 15-Pin Strain Relief ONLY
5 137013 4 Nylon Standoff
6 137151 1 Motor Control Solid State Relay Board, 1 HP, 125 VAC - 250 VAC 1Ø
50/60 Hz
7 136057 * 1/2-amp (Slo-Blo) Fuse ONLY
136052 * 4-amp Fuse ONLY
8 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
9 141403 1 Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models Only)
10 150002 2 #6-32 x 1” Round Head Machine Screw
11 120715 1 30-Position Terminal Block
12 151000 2 #6-32 Pal Nut
13 136057 * 1/2-amp (Slo-Blo) Fuse ONLY
14 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
15 136008 1 Fuse Block/Strip ONLY
* As required.
ForDirectSpark Ignition(DSI) Models ONLY

6 American Dryer Corporation 450085-8
Phase 4.1 Dual Coin Microprocessor Control Panel Assembly
ForDirectSpark Ignition(DSI) Models ONLY
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard LabelAssembly
2 865098 1 Phase 4.1 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
865099 1 Phase 4.1 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
800040 1 Microprocessor Coin Control Panel ONLY
800039 1 Microprocessor Coin Control Panel ONLY with Battery Bracket
3 150415 1 #10-16 x 1/2” Phillips Round Head Crimptite Screw
4 137130 1 Phase 4.1 Coin Microprocessor Controller ONLY
137131 1 Phase 4.1 Coin Microprocessor Controller ONLY with Battery Clip
5 152001 4 #8-32 Hex Nut
6 153012 4 #8 Star Washer
7 -------- 1 Microprocessor Dual CoinAcceptor with Optical Switch
(refer to Microprocessor Coin Acceptor Listing on page 61)
8 137056 2 Optical Switch ONLY
9 137023 2 Optical Switch Connector ONLY
10 137021 6 Microprocessor Socket ONLY
865050 1 Single Coin Optical Switch Harness
--- 122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.

450085-8 Telephone: [phone] / www.amdry.com 7
Phase 4.1 Dual Coin Microprocessor Control Box Assembly
ForDirectSpark Ignition(DSI) Models ONLY
Illus. No. Part No. Qty.Description
1 137021 12 Microprocessor Socket ONLY
2 137020 1 15-Pin Microprocessor Connector ONLY
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
3 150315 1 #6 x 3/8” Phillips Pan Head Screw
4 137022 1 15-Pin Strain Relief ONLY
5 137013 4 Nylon Standoff
6 137151 1 Motor Control Solid State Relay Board, 1 HP, 125 VAC - 250 VAC 1Ø
50/60 Hz
7 136057 * 1/2-amp (Slo-Blo) Fuse ONLY
136052 * 4-amp Fuse ONLY
8 150300 2 #10 x 1/2” Hex Washer TEK Screw
9 141403 1 Direct Spark Ignition (DSI) 24VAC Transformer (for gas models Only)
10 150002 2 #6-32 x 1” Round Head Machine Screw
11 120715 1 30-Position Terminal Block
12 151000 2 #6-32 Pal Nut
13 136057 * 1/2-amp (Slo-Blo) Fuse ONLY
14 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw
15 136008 1 Fuse Block/Strip ONLY
* As required.

8 American Dryer Corporation 450085-8
Phase 4 Single Coin Microprocessor Control Panel/Box Assemblies
ForGlo-Bar®IgnitionModels ONLY

450085-8 Telephone: [phone] / www.amdry.com 9
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard LabelAssembly
2 800088 1 Phase 4 Coin Microprocessor Control Panel Assembly
(includes illus. nos. 1, 2, 4, 13, and 14)
800168 1 Phase 4 Coin Microprocessor Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 13, and 14)
800040 1 Microprocessor Coin Control Panel ONLY
800039 1 Microprocessor Coin Control Panel ONLY with Battery Bracket
3 150415 1 #10-16 x 1/2” Phillips Round Head Crimptite Screw
4 137110 1 Phase 4 Coin Microprocessor Controller ONLY
137115 1 Phase 4 Coin Microprocessor Controller ONLY with Battery Clip
5 -------- 1 Microprocessor Single CoinAcceptor with Optical Switch
(refer to Microprocessor Coin Acceptor Listing on page 61)
6 137056 1 Optical Switch ONLY
7 137023 1 Optical Switch Connector ONLY
8 137021 3 Microprocessor Socket ONLY
865050 1 Single Coin Optical Switch Harness
9 150315 1 #6 x 3/8” Phillips Pan Head Screw
10 137020 1 15-Pin Microprocessor Connector ONLY
11 137021 14 Microprocessor Socket ONLY
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
12 137022 1 15-Pin Strain Relief ONLY
13 153012 4 #8 Star Washer
14 152001 4 #8-32 Hex Nut
15 137013 4 Nylon Standoff
16 137077 1 Arc Suppressor (A.S.) Board with Relays (115 VAC)
137061 1 Arc Suppressor (A.S.) Board ONLY without Relays
137150 1 Solid State Relay Board ONLY (for 115 volt application Only)
17 137151 2 Motor Control Solid State Relay Board, 1 HP, 125 VAC-250 VAC 1Ø
50/60 Hz
18 136052 2 4-amp Fuse ONLY
19 150002 2 #6-32 x 1” Round Head Machine Screw
20 120709 1 Terminal Strip(8-position)
21 151000 2 #6-32 Pal Nut
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.
Phase 4 Single Coin Microprocessor Control Panel/Box Assemblies
ForGlo-Bar®IgnitionModels ONLY

10 American Dryer Corporation 450085-8
Phase 4 Dual Coin Microprocessor Control Panel/Box Assemblies
ForGlo-Bar®IgnitionModels ONLY

450085-8 Telephone: [phone] / www.amdry.com 11
Illus. No. Part No. Qty.Description
1 112526 1 Coin Keyboard LabelAssembly
2 800088 1 Phase 4 Coin Microprocessor Control Panel Assembly
(includes illus. nos. 1, 2, 4, 13, and 14)
800168 1 Phase 4 Coin Microprocessor Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4, 13, and 14)
800040 1 Microprocessor Coin Control Panel ONLY
800039 1 Microprocessor Coin Control Panel ONLY with Battery Bracket
3 150415 1 #10-16 x 1/2” Phillips Round Head Crimptite Screw
4 137110 1 Phase 4 Coin Microprocessor Controller ONLY
137115 1 Phase 4 Coin Microprocessor Controller ONLY with Battery Clip
5 -------- 1 Microprocessor Single CoinAcceptor with Optical Switch
(refer to Microprocessor Coin Acceptor Listing on page 61)
6 137056 1 Optical Switch ONLY
7 137023 1 Optical Switch Connector ONLY
8 137021 3 Microprocessor Socket ONLY
865051 1 Dual Coin Optical Switch Harness
9 150315 1 #6 x 3/8” Phillips Pan Head Screw
10 137020 1 15-Pin Microprocessor Connector ONLY
11 137021 14 Microprocessor Socket ONLY
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
12 137022 1 15-Pin Strain Relief ONLY
13 153012 4 #8 Star Washer
14 152001 4 #8-32 Hex Nut
15 137013 4 Nylon Standoff
16 137077 1 Arc Suppressor (A.S.) Board with Relays (115 VAC)
137061 1 Arc Suppressor (A.S.) Board ONLY without Relays
137150 1 Solid State Relay Board ONLY (for 115 volt application Only)
17 137151 2 Motor Control Solid State Relay Board, 1 HP, 125 VAC-250 VAC 1Ø
50/60 Hz
18 136052 2 4-amp Fuse ONLY
19 150002 2 #6-32 x 1” Round Head Machine Screw
20 120709 1 Terminal Strip(8-position)
21 151000 2 #6-32 Pal Nut
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.
Phase 4 Dual Coin Microprocessor Control Panel/Box Assemblies
ForGlo-Bar®IgnitionModels ONLY

12 American Dryer Corporation 450085-8
Phase 4 OPL Microprocessor Control Panel Assembly
ForDirectSpark Ignition(DSI) Models ONLY
Illus. No. Part No. Qty.Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-On Labels (English Only)...Not Illustrated
112275 1 OPL Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated
112277 1 3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
112278 1 5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
2 800057 1 Microprocessor Control Panel ONLY
800164 1 Microprocessor Control Panel ONLY with Battery Bracket
800171 1 Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 8)
865095 1 Phase 4 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete with Battery Option
(includes illus. nos. 1 through 8)
3 137125 1 Phase 4 OPL Non-Reversing Microprocessor Controller ONLY
137126 1 Phase 4 OPL Non-Reversing Microprocessor Controller ONLY
with Battery Clip
4* 306052 1 Electrostatic Shield ONLY
5 150108* 4 #8-32 x 1/2” Pan Head Machine Screw
152001 4 #8-32 Hex Nut
6* 153000 4 #8 Steel Burr
7* 137011 4 8-32”Aluminum Standoff
8 160005 1 Spring Turn Latch (2-piece)
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.
* Used on gas dryer models with the Direct Spark Ignition (DSI) system mfd. prior to March 13, 1989.

450085-8 Telephone: [phone] / www.amdry.com 13
Phase 4 OPL Microprocessor Control Box Assembly
ForDirectSpark Ignition(DSI) Models ONLY
Illus. No. Part No. Qty.Description
1 137021 12* Microprocessor Socket ONLY
2 137020 1 15-Pin Microprocessor Connector ONLY
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
3 150315 1 #6 x 3/8” Phillips Pan Head Screw
4 137022 1 15-Pin Strain Relief ONLY
5 137013 4 Nylon Standoff
6 137076 1 Arc Suppressor (A.S.) Board with Relay (115 volt controls Only)
137078 1 Arc Suppressor (A.S.) Board with Relay (208/230 volt controls Only)
137061 1 Arc Suppressor (A.S.) Board ONLY without Relay
137151 1 Motor Control Solid State Relay Board, 1 HP, 125 VAC - 250 VAC 1Ø
50/60 Hz
7 136052 1** 4-amp Fuse ONLY
8 131916 1 Electromechanical Relay ONLY (115 VAC)
131930 1 Electromechanical Relay ONLY (208/230 VAC)
9 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
10 141403 1 Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models Only)
11 150002 2 #6-32 x 1” Round Head Machine Screw
12 120715 1 30-Position Terminal Block
120709 1 Terminal Strip(8-position)
13 151000 2 #6-32 Pal Nut
* Some models require a quantity of 14.
** Some models require a quantity of 2.

14 American Dryer Corporation 450085-8
Phase 3 OPL Microprocessor Control Panel Assembly
ForGlo-Bar®IgnitionModels ONLY
Illus. No. Part No. Qty.Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-On Labels (English Only)...Not Illustrated
112275 1 OPL Stick-On Labels (Spanish, Italian, and Hebrew)...Not Illustrated
112277 1 3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
112278 1 5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
2 800057 1 Microprocessor Control Panel ONLY
800164 1 Microprocessor Control Panel ONLY with Battery Bracket
800161 1 Phase 3 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 5)
800163 1 Phase 3 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete with Battery Option
(includes illus. nos. 1 through 5)
3 137092 1 Phase 3 OPL Non-Reversing Microprocessor Controller ONLY
137093 1 Phase 3 OPL Non-Reversing Microprocessor Controller ONLY
with Battery Clip
4 152001 4 #8-32 Hex Nut
5 160005 1 Spring Turn Latch (2-piece)
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.
NOTE: OPL microprocessor controllers listed are suitable for ALL voltage applications.

450085-8 Telephone: [phone] / www.amdry.com 15
Phase 3 OPL Microprocessor Control Box Assembly
ForGlo-Bar®IgnitionModels ONLY
Illus. No. Part No. Qty.Description
1 137020 1 15-Pin Microprocessor Connector ONLY
2 137021 13 Microprocessor Socket ONLY
122800 1 Microprocessor (female) Pin Extraction Tool...Not Illustrated
3 150315 1 #6 x 3/8” Phillips Pan Head Screw
4 137022 1 15-Pin Strain Relief ONLY
5 137013 4 Nylon Standoff
6 137077 1 Arc Suppressor (A.S.) Board with Relays (115 volt controls Only)
137061 1 Arc Suppressor (A.S.) Board ONLY without Relays
137150 1 Solid State Relay (115 volt application Only)
137151 1 Motor Control Solid State Relay Board, 1 HP, 125 VAC - 250 VAC 1Ø
50/60 Hz
7 131916 2 Electromechanical Relay ONLY (115 VAC)
8 136052 2 4-amp Fuse ONLY
9 150002 2 #6-32 x 1” Round Head Machine Screw
10 120709 1 Terminal Strip(8-position)
11 151000 2 #6-32 Pal Nut

16 American Dryer Corporation 450085-8
Dual Timer Control Panel/Box Assemblies
ForDirectSpark Ignition(DSI) Models ONLY
Illus. No. Part No. Qty.Description
1 123000 1 Red Indicator Light (115 volt)
123001 1 Red Indicator Light (230 volt)
2 122400 1 Rocker Heat Selector Switch
3 865550 1 Dual Timer Control PanelAssembly Complete 115 VAC
(includes illus. nos. 1 through 21)
865551 1 Dual Timer Control PanelAssembly Complete 230 VAC
(includes illus. nos. 1 through 21)
800051 1 Dual Timer Control Panel ONLY
4 131812 1 Push-To-Start Relay (115 volt)
131813 1 Push-To-Start Relay (230 volt)
5 150207 2 #10-24 x 1/2” Round Head Machine Screw

450085-8 Telephone: [phone] / www.amdry.com 17
Illus. No. Part No. Qty.Description
6 154001 2 #10-24 Speed Nut
7 152013 2 #6-32 Hex Nut
8 153010 2 #6 Star Washer
9 120708 1 3-Position Terminal Block
120713 1 18-Position Terminal Block
10 150002 2 #6-32 x 1” Round Head Machine Screw
11 150110 4 #8-32 x 1/4” Phillips Head Machine Screw
12 150001 2 #6-32 x 1/2” Round Head Machine Screw
13 131030 1 Dual Timer Relay (115 volt)
131031 1 Dual Timer Relay (230 volt)
14 151000 2 #6-32 Pal Nut
15 112050 1 Dual Timer Label ONLY
16 160005 1 Spring Turn Latch (2-piece)
17 124103 2 Arrow Timer Knob ONLY
18 124020 1 60 MinuteTimer (115 volt)
124021 1 60 MinuteTimer (230 volt)
19 124022 1 15 MinuteTimer (115 volt)
124023 1 15 MinuteTimer (230 volt)
20 122602 1 9-Pin Connector ONLY
21 122700 9 Pin Terminal ONLY
22 122603 1 9-Pin Socket Connector ONLY
23 122701 9 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool...Not Illustrated
24 136002* 1 Panel Mount Fuse Holder Assembly ONLY
875250* 1 In-Line Fuse Holder Assembly ONLY
25** 136052 1 4-amp Fuse ONLY
136054 1 15-amp (Slo-Blo) Fuse ONLY
136056 1 20-amp (Slo-Blo) Fuse ONLY
26 141403 1 Direct Spark Ignition (DSI) 24 VAC Transformer
27 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
28 150415 2 #10-16 x 1/2” Phillips Round Head Crimptite Screw
29 131814 1 Motor Control Relay ONLY (115 volt)
131815 1 Motor Control Relay ONLY (230 volt)
30 150002 2 #6-32 x 1” Round Head Machine Screw
31 120715 1 30-Position Terminal Block
120709 1 Terminal Strip(8-position)
32 151000 2 #6-32 Pal Nut
* Model application varies.
** Check fuse rating for verification.
Dual Timer Control Panel/Box Assemblies (continued)
ForDirectSparkIgnition(DSI) Models ONLY

18 American Dryer Corporation 450085-8
Dual Timer Control Panel/Box Assemblies
ForGlo-Bar®IgnitionModels ONLY