American Dryer Corp. Aquatex AD-52 User manual

AD-52 Aquatex
Parts Manual
1995 thru 2000
American Dryer Corporation
88 Currant Road
Fall River, MA02720-4781
Telephone: [phone] / Fax: [phone]
e-mail: [e-mail]
ADC Part No. 450196
012100/DX/pb

Retain This Manual In A Safe Place For Future Reference
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at [phone] or telephone your orders directly to the ADC Parts Department at
[phone]. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
DATE OF PURCHASE MODEL NO.
DISTRIBUTORS NAME
Serial Number(s)
IMPORTANT NOTE TO PURCHASER
Information must be obtained from your local gas supplier on the instructions to be
followed if the user smells gas. These instructions must be posted in a prominent
location near the dryer.
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual
included with the dryer.
The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser dessence
ni dautres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
AD-52 AQUATEX

Table of Contents
HIGH SECURITY CONTROL DOOR ASSEMBLY ............................................................................................... 2
MICROPROCESSOR CONTROL PANEL ASSEMBLY ........................................................................................... 3
MAIN DOOR ASSEMBLY ............................................................................................................................. 4
MAIN DOOR SWITCH ............................................................................................................................... 5
FRONT PANEL ASSEMBLY .......................................................................................................................... 6
BASKET (TUMBLER)/SUPPORT ASSEMBLIES ................................................................................................. 7
DROP LINT DOOR ASSEMBLY ..................................................................................................................... 8
LINT TRAP ASSEMBLY ............................................................................................................................... 9
TUMBLER BEARING ASSEMBLY ........................................................................................................... 10, 11
IDLER BEARING ASSEMBLY ...................................................................................................................... 12
HI-LIMIT SENSOR BRACKET ................................................................................................................... 13
TOTALLY ENCLOSED, FAN-COOLED (T.E.F.C.) MOTOR MOUNT ASSEMBLY .......................................... 14, 15
DIRECT SPARK IGNITION (DSI) BURNER ASSEMBLY ............................................................................. 16, 17
ELECTRIC OVEN ASSEMBLY ............................................................................................................... 18, 19
SAIL SWITCH/HIGH LIMIT ASSEMBLIES .................................................................................................... 20
REAR ELECTRIC PANEL ASSEMBLY
FOR 120 VOLT GAS MODELS ONLY .................................................................................................. 21
REAR ELECTRICAL PANEL ASSEMBLY
FOR 208-240 VOLT GAS MODELS ONLY ........................................................................................... 22
REAR ELECTRIC PANEL ASSEMBLY
FOR 208-240 VOLT ELECTRIC MODELS ONLY ................................................................................... 23
REAR ELECTRIC PANEL ASSEMBLY
FOR 416 VOLT ELECTRIC MODELS ONLY .......................................................................................... 24
DISCONNECT PANEL ASSEMBLY
FOR 120 VOLT GAS MODELS ONLY .................................................................................................. 25
DISCONNECT PANEL ASSEMBLY
FOR 208-240 VOLT GAS MODELS ONLY ........................................................................................... 26
DISCONNECT PANEL COVER
FOR GAS MODELS ONLY ................................................................................................................... 27
MAIN ELECTRICAL DISCONNECT/AIR FILTER ASSEMBLY ............................................................................ 28
FOR GAS MODELS ONLY ................................................................................................................... 29
REAR VIEW
FOR ELECTRIC MODELS ONLY ........................................................................................................... 30
REAR/TOP PANEL ASSEMBLIES
FOR ELECTRIC MODELS ONLY ........................................................................................................... 31
REAR/TOP PANEL ASSEMBLIES
FOR GAS MODELS ONLY ................................................................................................................... 32
HUMIDITY TRANSMITTER ASSEMBLY ........................................................................................................ 33
ELECTRIC OVEN APPLICATIONS CHART .................................................................................................... 34

2
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 160017 1 Special Dummy Lock ONLY
2 160016 1 Lock Cam ONLY
3 112352 1 Logo ONLY
4 881349* 1 Control Door Assembly Less Lock
(includes illus. nos. 4 through 7)
881350* 1 Stainless Steel Control Door Assembly Less Lock
(includes illus. nos. 4 through 7)
5 180201 1 Top Trim Strip with Lock Hole
6 117603 3 Noise Suppressor Tape (sold by the foot)
7 150201 5 #10-32 x 1/4" Phillips Round Head Machine Screw
8 150300 4 #10 x 1/2" Hex Washer TEK Screw
9 102600 1 Control Door Support Rod Catch
10 102601 1 Control Door Rod Retainer Clip
11 102502 1 Control Door Support Rod
12 122641 1 15-Pin Microprocessor Connector
13 122706 ** Socket
14 153000 2 #10 x 1/2" Hex Head Machine Screw
15 319754 1 Bracket
16 152001 1 #8-32 Hex Nut
17 153018 1 #8 Internal Star Washer
18 121488 1 3/8" Rubber Cushioned Clamp
19 136989 1 Humidity Sensor Assembly
20 122640 1 9-Pin Connector
21 122706 ** Socket Mate-N-Lock
22 122642 1 6-Pin Connector
* Specify color when ordering.
** As required.
High Security Control Door Assembly

3
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 112535 1 OPL English Keyboard Label Assembly
2 801255 1 Phase 5 Microprocessor Control Panel ONLY
881319 1 Microprocessor Control PanelAssembly Complete
(includes illus. nos. 1 through 6)
3 137108 1 Phase 5 Microprocessor Controller (computer)
4 153010 2 # 6 Star Washer
5 150005 2 # 6-32 x 1/4" Phillips Round Head Machine Screw
6 150309 1 # 10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw
Microprocessor Control Panel Assembly

4
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 881421 1 Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
2 800448 4 12-1/2" Stainless Steel Main Door Hinge Assembly
3 150410 4 #10-24 x 3/8" Phillips Pan Head Taptite Screw
4 152014 1 1/4-20 Free Spin Wash Nut
5 102349 1 Main Door Gasket
6 102212 1 20-7/16" Door Glass with (4) Holes
170730 1 Main Door Glass Adhesive (10.3 oz. cartridge)
7 150448 4 1/2" Stainless Steel Flat Head Allen Screw
8 170319 4 Door Glass (Nylon) Spacer
9 150431 1 Main Door Latch Screw
(#10 x 7/16" Dome Hex Head)
Main Door Assembly

5
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 152013 2 #6-32 Hex Nut
2 153008 2 #6 Lock Washer
3 137005 1 Single Pole Door Switch
4 121028 2 Insulated Female Terminal
5 154281 2 3/8" Standard Nylon Spacer
6 800448 1 12-1/2" Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
7 153565 2 #6 Stud
8 313218 1 Main Door Switch Housing
9 150201 2 #10-32 x 1/4" Phillips Pan Head Screw
10 121405 1 Rubber Grommet
Main Door Switch Assembly

6
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 881328* 1 Left Hand Front Panel
(includes illus. nos. 1 through 3 and 5)
881329* 1 Stainless Steel Left Hand Front Panel
(includes illus. nos. 1 through 3 and 5)
2 154215 2 5/32" Pop Rivet
3 170330 1 Friction Door Latch
4 150309 8 #10-16 x 1/2" Phillips Round Head Crimptite Screw
5 121405 1 Rubber Grommet
6 122351 1 "EMERGENCYSTOP" (E-Stop) Twist and Lock Operator
7 122419 1 "EMERGENCY STOP" (E-Stop) Label
8 132395 1 Normally Closed Contact Block with Base
* Specify color when ordering.
Front Panel Assembly

7
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1* 800838 1 Galvanized Basket (Tumbler) ONLY(without felt collar)
800837** 1 Non-Reversing Galvanized Basket (Tumbler) and Support
Assembly with Tapered Ribs
(includes illus. nos. 1 through 10)
2 150309 40 #10-16 x 1/2" Phillips Round Hex Head TEK Crimptite Screw
3 301302 2 Basket (Tumbler) Rib ONLY(Low Rib)
301311 2 Tapered Basket (Tumbler) Baffle Rib ONLY(High Rib)
4 150500 1 5/16-18 x 3/4" Socket Button Head Screw
5 100903 4 3/8-16 x 38-1/2" Tie Rod
6 153004 4 3/8" Flat Washer
7 800616 1 Non-Reversing Basket (Tumbler) Support ONLY
8 152005 4 3/8-16 Hex Nut
9 153005 4 3/8" Lock Washer
10 153004 4 3/8" Flat Washer
11 116001 1 Felt Collar ONLY
-- 401010 1 #847 Adhesive for Felt Collar (5.0 oz tube)
* For stainless steel basket (tumbler) contact factory
** Felt collar is not included and must be ordered separately
Basket (Tumbler)/Support Assemblies

8
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 800150 1 Knob Latch Kit Assembly
160200 1 Knob Latch ONLY with Two (2) Screws
160003 1 Dummy Lock Only
2 160008 1 Lock Cam For Dummy Lock
160009 1 Knob Latch Adjustable Cam
150425 1 #12-24 x 3/8" Round Head Machine Screw
(for Knob LatchAdjustable Cam)
3 157000 1 Drop Lint Door Spring
4 881351 1 Drop Lint DoorAssembly
(includes illus. nos. 4 through 8)
881353 1 Insulated Drop Lint DoorAssembly
(includes illus. nos. 4 through 8)
881352 1 Stainless Steel Drop Lint DoorAssembly
5 150201 10 #10-32 x 1/4" Phillips Pan Head Machine Screw
6 117604 7 Neoprene Sponge Tape (sold by the foot)
7 117603 3 Noise Suppressor Tape (sold by the foot)
8 180211 1 #31-1/8" Trim
9 150419 2 #6 x 1/2" Tamper Proof TEK Screw
150418 1 Tamper Proof Screw Hand Driver
10 108120 1 Chain For Drop Lint Door
Drop Lint Door Assembly

9
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 800402 1 Lint TrapAssembly Complete
(includes illus. nos. 1, 3, 4, and 5)
800404 1 LintTrap Only
2 154200 7 5/32" Pop Rivet
3 304101 1 Lint Screen Holder ONLY
4 150300 2 #10 x 1/2" Hex Washer TEK Screw
5 800501 1 Lint Screen Holder ONLY
6 150419 2 #6 x 1/2" Tamper Proof TEK Screw
7 108120 1 Chain for Drop Lint Door
 150418 1 Tamper Proof Screw Hand Driver
Lint Trap Assembly

10
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Tumbler Bearing Assembly

11
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 880220 1 1-3/4" Flange Bearing with Nylock Set Screw
2 153025 4 9/16" Lock Washer
3 152050 4 9/16-12 Hex Nut
4 150508 2 3/8-16 x 3/4" Hex Head Machine Bolt
5 153005 2 3/8" Lock Washer
6 152005 2 3/8-16 Hex Nut
7 150600 2 3/8-16 x 1-1/2" Hex Head Machine Bolt
8 153004 * 3/8" Flat Washer
9 153005 2 3/8" Lock Washer
10 152005 2 3/8-16 Hex Nut
11 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt
12 153002 4 5/16" Lock Washer
13 153001 4 5/16" Flat Washer
14 150621 2 #5/16-18 x 1-1/2" Hex Head Machine Bolt
15 152004 2 #5/16-18 Hex Nut
16 801101 1 1-3/8" Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
801103 1 1-3/8" Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
801105 1 1-3/8" Bearing Box ONLY
17 801104 1 Pillow Block Bearing Support ONLY
18 100202 1 1-3/8" Pillow Block Bearing
19 152004 2 #5/16-18 Hex Nut
20 150610 2 #5/16-18 x 1-1/2" Allen Set Screw
21 101100 1 18" Pulley (for Non-Reversing Models ONLY)
100735 1 Shaft Key (for Taper Lock Hub)
22 154301 2 #5/16-18 x 5/16" Allen Set Screw
23 100713 1 1/4" x 1/4" x 7/8" Key
24 100108 1 5L-680 V-Belt (tumbler to idler) For Non-Reversing Models ONLY
100106 1 5L-690 V-Belt (tumbler to idler) For Reversing Models ONLY
* As required
Tumbler Bearing Assembly

12
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Illus. No. Part No. Qty. Description
1 100108 1 5L-680 V-Belt (basket/tumbler to idler)
2 101129 1 9" x 2-1/2" Compound Pulley
3 100110 1 4L-500 V-Belt (for 60 Hz models Only)
100103 1 4L-510 V-Belt (idler to motor)
For 50 Hz Models ONLY
4 154301 2 5/16-18 x 5/16"Allen Set Screw
5 100705 1 3/16" x 3/16" x 1-3/8" Key
6 301850 1 5/8" x 3/4" Idler Shaft
7 150529 3 1/4-20 x 2-1/4" Carriage Bolt
8 100214 2 5/8" Flange Bearing
9 153007 3 1/4" Lock Washer
10 152002 3 1/4-20 Hex Nut
11 801007 1 Idler Bearing Assembly Complete
(includes illus. nos. 6 through 17)
12 150617 2 3/8-16 x 1" Hex Head Machine Bolt
13 153005 2 3/8" Lock Washer
14 153004 2 3/8" Flat Washer
15 801009 1 Idler Square Washer
16 152004 1 5/16-18 Hex Nut
17 150509 1 5/16-18 x 3" Hex Head Machine Bolt
Idler Bearing Assembly

13
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 305007 1 Universal Sensor Bracket
2 130301 1 225º Hi-Limit Manual Reset Thermostat
3 153010 2 #6 Star Washer
4 152000 2 #6-32 Hex Nut
5 881354 2 Microprocessor Sensor Bracket Harness
6 150005 2 #6-32 x 1/4" Phillips Round Head Machine Screw
Hi-Limit Sensor Bracket

14
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

15
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 100112 1 4L-610 V-Belt (to idler assembly)
2 100701 1 3/16" x 3/16" x 1" Key
3 101139 1 5/8" x 2-3/4" Motor Pulley (for 60 Hz Models Only)
101130 1 5/8" x 2-1/2" Motor Pulley (for 50 Hz Models Only)
4 150501 4 5/16-18 x 3/4" Hex Head Machine Bolt
5 153002 4 5/16" Lock Washer
6 153001 4 5/16" Flat Washer
7 100069 1 3/4 HP 120-230v 60 Hz 1Ø T.E.F.C. Motor with Plug (56Z Frame)
100068 1 3/4 HP240v 1Ø 50 Hz T.E.F.C. Motor with Plug (56Z Frame)
8 122701 8 Socket Terminal
122801 1 Pin/Socket Extraction Tool
9 137030 1 8-Pin Female Housing Connector
10 152004 4 5/16-18 Hex Nut
11 153002 4 5/16" Lock Washer
12 153001 4 5/16" Flat Washer
13 117604 4 Neoprene Sponge Tape (sold by the foot)
14 154000 4 5/16-18 Tinnerman Nut
15 800905 1 Non-Reversing Motor Mount Only (56Z Frame)
803970* 1 1/2 HP 208/230/380/460v 60 Hz 3Ø T.E.F.C. Motor MountAssembly
Complete
(includes illus. nos. 2 through 6 and 13 through 22)
830971* 1 1/2 HP 208/230/380/460v 3Ø50 Hz T.E.F.C. Motor Mount
Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
803988* 1 1/2 HP 115/230v 1Ø 60 Hz T.E.F.C. Motor MountAssembly
Complete with Plug Motor
(includes illus. nos. 3 through 7 and 13 through 20)
803989* 1 1/2 HP 240v 1Ø 50 Hz T.E.F.C. Motor Mount Assembly Complete
with Plug Motor
(includes illus. nos. 3 through 7 and 13 through 20)
16 153050 1 1/2" Flat Washer
17 100604 1 12-1/2" Impellor (Fan/Blower) with 1/2" Bore
18 100702 1 1/8" x 1/8" x 11/2" Key
19 153050 2 1/2" Flat Washer
20 152006 2 1/2-20 Left Hand Jam Nut
*Specify voltage when ordering.
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly

16
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly

17
Telephone: [phone] Fax: [phone]
Illus. No. Part No. Qty. Description
1 318030 1 DSI Burner Shield
2 150300 2 #10 x 1/2" Hex Washer TEK Screw
3 150309 2 #10-16 x 1/2" Phillips Round Head Crimptite
4 128915 1 DSI Ignitor/Flame Probe Assembly
880134 1 Ignitor/Flame Probe Kit Assembly
(includes illus. nos. 4 and 5)
5 880330 1 High Voltage (HV) Wire and Connector Assembly
6 150103 2 #8-32 x 1/2" Pan Head Machine Screw
7 153000 2 #8 Steel Burr
8 151001 2 #8-32 Pal Nut
9 141105 2 Large Tube Burner ONLY
10* 140827 2 #21 Burner Orifice (Natural Gas) ONLY
140854 2 #40 Burner Orifice (L.P. Gas) ONLY
11 141230 1 1/2" DSI Manifold (2-Port)
12 318700 1 Pipe Bracket (bent)
13 150300 2 #10 x 1/2" Hex Washer TEK Screw
14 128927 1 1/2" 24 VAC Redundant (natural gas) Gas Valve
140411 1 1/2" Valve Conversion L.P. Kit (liquid propane)
880960 1 1/2" DSI Gas Valve/L.P. Kit Combination
15 881367 1 1/2" Union Shutoff withTail Piece
16 142809 1 1/2" x 29 1/8" Pipe
17 150309 4 #10-16 x 1/2" Phillips Round Hex Head TEK Crimptite Screw
18 318700 2 Pipe Bracket (bent)
19 850851 1 Non-Heat Reclaimer Burner Box ONLY
850861 1 Heat Reclaimer Burner Box ONLY
809625 1 Burner Assembly Complete Less Orifices
20 880815 1 ADC DSI Module ONLY
21 150299 4 #10 x 1" Hex Washer TEK Screw
22 829016 1 Aquatex Temperature SensorAssembly
23 150300 1 #10 x 1/2" Hex Washer TEK Screw
-- 874044** 1 AD-52Aquatex L.P. Conversion Kit
-- 410001 1 1/2"Allen Wrench
* Consult factory for elevations over 2,000 feet (610 meters).
** Orifices are not included and must be ordered separately
Direct Spark Ignition (DSI) Burner Assembly

18
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Electric Oven Assembly