American Dryer Corp. SL50 User manual

SL50 / SL75
Parts Manual
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: [phone] / Fax: [phone]
E-mail: [e-mail]
www.amdry.com
ADC Part No. 450299-3

Retain This Manual
In A Safe Place For Future Reference
This product embodies advanced concepts in
engineering, design, and safety. If this product
is properly maintained, it will provide many years
of safe, efficient, and trouble free operation.
ONLY properly licensed technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment
or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted
near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find
it useful. The manufacturer reserves the right to make changes from time to time,
without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
FOR YOUR SAFETY
Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________ MODEL NO. _____________
RESELLER’S NAME ________________________________________________________________________________
Serial Number(s) ____________________________________________________________________________________
___________________________________________________________________________________________________
___________________________________________________________________________________________________

Replacement parts can be obtained from your reseller
or the ADC factory. When ordering replacement parts from
the factory, you can FAX your order to ADC at [phone]
or telephone your order directly to the ADC Parts Department
at [phone]. Please specify the dryer model number
and serial number in addition to the description and part number,
so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict
your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the
descriptions of the parts thoroughly before ordering.
NOTES ____________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
___________________________________________________________________________________
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructionsmustbepostedinaprominentlocationnearthedryer.

4 American Dryer Corporation 450299-3
Parts Diagram

450299-3 www.amdry.com 5
Parts List
Illus. No. Part No. Qty.Description
1 851399 1 SL50 / SL75 Back Guard Assembly for Gas and Electric
(for models mfd. as of July 27, 2005)
2 851253 1 SL50 Left Side Panel Assembly
851345 1 SL75 Left Side Panel Assembly
3 851255 1 SL50 Right Side Panel Assembly
851343 1 SL75 Right Side Panel Assembly
4 851268 1 SL50 Top Panel Assembly
851367 1 SL75 Top Panel Assembly
5 153064 2 1/4-20 x 1/2” Socket Cap Screw
6 153072 2 1/4” High Collar Lock Washer
7 185426 1 Dual Screw Backup Washer
8 153048 2 Inner Friction Pad
354217 1 3/4” Plate Spacer … Not Illustrated
185240 1 Extended Tumbler Shaft … Not Illustrated
9 851372 2 Rear Wheel Bracket Assembly (for models without banded tumbler)
851562 2 Rear Wheel Bracket Assembly (for models with banded tumbler)
180060 1 3-1/2” Wheel ONLY
10 819295* 1 Large Lint Drawer Assembly (painted)
851380 1 Large Lint Drawer Assembly (stainless steel)
11 851557 1 SL50 Stainless Steel Tumbler with Band
851555 1 SL75 Stainless Steel Tumbler with Band
851374 1 SL50 Galvanized Tumbler
851376 1 SL75 Galvanized Tumbler
12 102410 1 SL50 / SL75 15 Rib Drive Belt
(for all SL75 and SL50 models mfd. as of February 3, 2006)
102409 1 SL50 12 Rib Drive Belt
(for SL50 models mfd. prior to February 3, 2006)
13 887190 1 SL50 / SL75 Non-Coin Mid Support Panel with Auto (black)
887146 1 SL50 / SL75 Non-Coin Mid Support Panel with Auto (white)
887147 1 SL50 / SL75 Non-Coin Mid Support Panel with Auto (stainless steel)
887121 1 SL50 / SL75 Coin Mid Support Panel (black)
887122 1 SL50 / SL75 Coin Mid Support Panel (white)
887123 1 SL50 / SL75 Coin Mid Support Panel (stainless steel)
14 851274* 1 Main Door Assembly Complete with Handle (painted)
851272 1 Main Door Assembly Complete with Handle (stainless steel)
103067 3 Door Hinge … Not Illustrated
15 170233* 1 Main Door Handle
16 818370 1 Rotation Sensor
17 851384 1 Coin Vault
122002 1 Coin Vault Switch … Not Illustrated
18 125916 1 Coin Box with 2 Keys (Note: each lock keyed different)
19 154061 4 Tinnerman U-Nut Retainer
20 183129 4 #10-32 x 1/2” T20 Truss Head
21 851371 2 Front Wheel Bracket Assembly (for models without banded tumbler)
851530 2 Front Wheel Bracket Assembly (for models with banded tumbler)
180060 1 3-1/2” Wheel ONLY
22 102397 1 SL50 / SL75 Door Gasket
23 131819 1 DPDT Reversing Relay 120V
131818 1 DPDT Reversing Relay 208-240V
* Specify color when ordering.

6 American Dryer Corporation 450299-3
Parts Diagram

450299-3 www.amdry.com 7
Illus. No. Part No. Qty.Description
1 851522 1 Phase 8 Coin Control Panel Assembly Complete
851518 1 Phase 8 Non-Coin Control Panel Assembly Complete
851521 1 Phase 8 Coin Control Panel (panel Only)
851517 1 Phase 8 Non-Coin Control Panel (panel Only)
2 185121* 1 Lower Panel (painted)
185122 1 Lower Panel (stainless steel)
3 160040 1 XX4451 Lock
160140 2 XX4451 Key
122200 1 Microswitch
160066 1 Offset Cam for Lock
154004 1 Twin Speed Nut
4 112587 1 Phase 8 Coin Keypad
112586 1 Phase 8 Non-Coin Keypad
5 818213 1 25¢ Coin Acceptor Assembly with Optic Switch
819264 1 Programmable Euro / UK Coin Acceptor
887041 1 Optic Switch ONLY (for 25¢ coin acceptor)
6 819508 1 Control Mount Assembly
7 887092 1 Phase 8 Microprocessor without Fire Suppression System
887093 1 Phase 8 Microprocessor with Fire Suppression System
8 350250 1 Computer Board Cover
9 350203 2 Strain Relief Door Guide Strip
10 350204 2 Strain Relief Cabinet Guide Strip
11 154220 4 Button Head Pop Rivet
12 150313 2 #10-16 x 5 TORX®Screw
13 819196 1 Main Door Switch Assembly
813411 1 Door Switch Extension Harness … Not Illustrated
14 154061 4 Tinnerman U-Nut Retainer
15 183129 4 #10-32 x 1/2” T20 Truss Head
* Specify color when ordering.
Parts List

8 American Dryer Corporation 450299-3
Parts Diagram

450299-3 www.amdry.com 9
Parts List
Illus. No. Part No. Qty.Description
1* 140877 2 SL50 #29 Orifice Natural Gas
140880 2 SL75 #22 Orifice Natural Gas
140881 2 SL50 #47 Orifice Liquid Propane
140905 2 SL75 #44 Orifice Liquid Propane
884248 1 SL50 Liquid Propane Conversion Kit
884249 1 SL75 Liquid Propane Conversion Kit
2 183137 2 3/8” Close Nipple Black Iron
3 154355 1 U-Bolt with Nuts for 1/2” Black Pipe
4 143344 1 SL50 1/2” x 26” Black Pipe ONLY
142636 1 SL75 1/2” x 36” Black Pipe ONLY
5 350226 1 Rear Gas Pipe Support
6 851387 1 Burner Funnel Transition Assembly
7 154200 14 5/32 Pop Rivet
8 130500 2 Radiant Heat Sensor
9 350217 1 Burner Funnel Top Lip Bracket
10 128910 2 Hot Surface Ignitor
11 851386 1 SL50 60 Hz Natural Gas Dual Burner Assembly
851389 1 SL50 50 Hz Natural Gas Dual Burner Assembly
851390 1 SL75 60 Hz Natural Gas Dual Burner Assembly
851391 1 SL75 60 Hz Natural Gas Dual Burner Assembly
350219 2 SL50 Round Gas Burner Funnel
350223 2 SL75 Round Gas Burner Funnel
12 152014 4 1/4-20 Free Spin Nut
13 350221 1 Dual Round Gas Burner Support Bracket
14 150331 19 #8-18 x 1/2” Pan Head TORX®Screw
15 350253 1 Front Gas Pipe Bracket
16 881367 1 Gas Shutoff Assembly
17 142820 1 1/2” x 1/2” x 1/2” Black Iron Tee
18 142703 1 1/2” x 4” Black Iron Pipe
19 142500 1 1/2 - 90° Elbow
20 142953 2 3/8” x 1/2” Steel Bushing
21 128944 2 25M Gas Valve 120 VAC 60 Hz
128907 2 25M Gas Valve 120 VAC 50 Hz
22 350220 1 Dual Gas Valve Bracket
23 183144 2 In-Shot Tube
24 185063 2 Ignitor Bracket
25 183145 2 Hot Surface Ignitor Mounting Screw
* Consult factory for elevation over 2,000 feet for correct burner orifice size.

10 American Dryer Corporation 450299-3
Parts Diagram