American Dryer Corp. SL31-31 User manual

ADC Part No. 450276-3
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: [phone] / Fax: [phone]
e-mail: [e-mail]
www.amdry.com
SL3131 Parts Manual
Phase 8

Retain This Manual
In A Safe Place For Future Reference
This product embodies advanced concepts in
engineering, design, and safety. If this product
is properly maintained, it will provide many years
of safe, efficient, and trouble free operation.
ONLY properly licensed technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment
or specified in the installation manual included with the dryer.
We have tried to make this manual as complete as possible and hope you will
find it useful. The manufacturer reserves the right to make changes from time to
time, without notice or obligation, in prices, specifications, colors, and material,
and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ________________________________________________ MODEL NO. _________________
RESELLER’S NAME ________________________________________________________________________________
Serial Number(s) ____________________________________________________________________________________
___________________________________________________________________________________________________
___________________________________________________________________________________________________
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
FOR YOUR SAFETY
Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.
SL3131

NOTES _______________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Replacement parts can be obtained from your reseller
or the ADC factory. When ordering replacement parts from
the factory, you can FAX your order to ADC at [phone]
or telephone your order directly to the ADC Parts Department
at [phone]. Please specify the dryer model number
and serial number in addition to the description and part number,
so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict
your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the
descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier
on the instructions to be followed if the user smells gas.
These instructions must be posted in a prominent location
near the dryer.

4 American Dryer Corporation 450276-3
Parts Diagram
Illus. No. Part No. Qty.Description
1 319427 1 Upper Back Guard (Gas and Electric)
319426 1 Lower Back Guard (Gas and Electric)
319435 1 Upper Back Guard (Steam) (For models mfd. as of December 7, 2005)
319542 1 Upper Back Guard (Steam) (For models mfd. prior to December 7, 2005)
319436 1 Back Guard Lower (Steam) (For models mfd. as of December 7, 2005)
319543 1 Back Guard Lower (Steam) (For models mfd. prior to December 7, 2005)
319437 1 Back Guard Right (Steam) (For models mfd. as of December 7, 2005)
319544 1 Back Guard Right (Steam) (For models mfd. prior to December 7, 2005)
819449 1 Exhaust Transition Piece for Formed Blower Housing (Gas and Electric)
318927 1 Exhaust Transition Piece for Made In House Blower Housing (Gas and Electric)
819159 1 Exhaust Transition Piece for Formed Blower Housing (Steam)
319545 1 Exhaust Transition Piece for Made In House Blower Housing (Steam)
2 819619 1 Left Side Panel Assembly (For models mfd. as of December 7, 2005)
818679 1 Left Side Panel Assembly (For models mfd. prior to December 7, 2005)
3 819621 1 Right Side Panel Assembly (For models mfd. as of December 7, 2005)
818678 1 Right Side Panel Assembly (For models mfd. prior to December 7, 2005)
4 818690 1 Outer Top Panel Assembly

450276-3 www.amdry.com 5
Parts List
Illus. No. Part No. Qty.Description
5 150445 2 1/4-20 x 3/4” Bolt
6 153072 2 Spring Washer
7 318891 1 Backup Washer
8 153048 2 Friction Pad (Gas and Electric)
102373 2 Friction Pad (Steam)
9 818183 1 Front Right Wheel Assembly (parts breakdown on page 11)
818184 1 Front Left Wheel Assembly (parts breakdown on page 11)
10 819288 1 Lint Screen Assembly (Painted)
819315 1 Lint Screen Assembly (Stainless Steel)
11 818815 1 Tumbler Assembly (Galvanized)
819398 1 Tumbler Assembly (Stainless Steel)
12 102407 1 Belt
13 819132 1 Front Panel Assembly (Coin)
819359 1 Front Panel Assembly (Non-Coin [OPL])
102004 2 Magnet
102005 2 Magnet Blank
152224 4 Magnet Screw
400563 1 Magnet Removal Bit
14 819301 1 Door Assembly Right Hinge (White)
819388 1 Door Assembly Right Hinge (Stainless Steel)
819700 1 Door Assembly Left Hinge (White)
819387 1 Door Assembly Left Hinge (Stainless Steel)
102396 1 Door Gasket
103067 2 Door Hinge
15 170233 1 Handle
16 819194 1 Rotation Sensor Assembly
17 819190 1 Top Trim Panel Assembly (White)
819192 1 Top Trim Panel Assembly (Stainless Steel)
18 819196 1 Door Switch Assembly
19 819504 1 Phase 8 Control Door Assembly (25¢ Coin)
819625 1 Phase 8 Control Door Assembly (Programmable – Euro)
819608 1 Phase 8 Control Door Assembly (Non-Coin [OPL])
154061 8 U-Nut Retainer
183129 8 T-20 Truss Head Machine Screw
20 185097 1 Toe Panel (White)
185048 1 Toe Panel (Stainless Steel)
21 884288 1 1/4 hp Motor with Sheave – 60 Hz (For models mfd. as of September 1, 2005)
887030 1 1/4 hp Motor with Sheave – 50 Hz (For models mfd. as of September 1, 2005)
818485 1 Motor Assembly (For models mfd. prior to September 1, 2005)
22 152004 2 5/16-18 Hex Nut
23 153002 2 5/16” Split Lock Washer
24 153018 2 1/4” Flat Washer
25 154266 2 3/8” x 3/8” (5/16-18) Screw
26 318909 1 Motor Sheave – 60 Hz
185067 1 Motor Sheave – 50 Hz
27 152011 1 1/2-13 Hex Nut
152028 1 1/2-13 Nylon Insert Locknut
28 153011 1 9/16” ID, 1-3/8” OD Flat Washer
29 150609 1 1/2-13 x 4-1/2” Tap Bolt
30 818213 1 Coin Acceptor Assembly (25¢ Coin)
819264 1 Coin Acceptor (Programmable – Euro)
31 112587 2 Keypad (Coin)
112586 2 Keypad (Non-Coin [OPL])
32 318930 1 Control Panel Right Hinge
33 319337 1 Phase 8 Control Cover
34 887102 1 Phase 8 Computer
887103 1 Phase 8 Computer with “S.A.F.E.” System Option
35 819196 1 Door Switch Assembly
36 318929 1 Control Panel Left Hinge
37 122200 1 Program Switch (For models mfd. prior to February 28, 2007)
38 154004 1 Twin Speed Nut (For models mfd. prior to February 28, 2007)
39 160066 1 1-1/8” Long Cam (For models mfd. prior to February 28, 2007)
40 160071 1 Lock (For models mfd. as of February 28, 2007)
160038 1 Lock (For models mfd. prior to February 28, 2007)
160140 1 Key

6 American Dryer Corporation 450276-3
Parts Diagram

450276-3 www.amdry.com 7
Illus. No. Part No. Qty.Description
1 819450 1 Lint Box / Blower Assembly Complete 120V
(For models mfd. as of September 1, 2006)
819193 1 Lint Box / Blower Assembly Complete 120V
(For models mfd. prior to September 1, 2006)
819233 1 Lint Box / Blower Assembly Complete 200-240V
(For models mfd. prior to June 14, 2006 and as of December 20, 2006)
819455 1 Lint Box / Blower Assembly Complete 200-240V
(For models mfd. between June 14, 2006 and October 24, 2006)
819193 1 Lint Box / Blower Assembly Complete 208-240V with Transformer
(For models mfd. between October 25, 2006 and December 20, 2006)
2 851242 1 Blower Motor Assembly 120V
(For models mfd. as of September 1, 2006)
819185 1 Blower Motor Assembly 120V
(For models mfd. prior to September 1, 2006)
819232 1 Blower Motor Assembly 200-240V
(For models mfd. prior to June 14, 2006 and as of December 21, 2006)
851243 1 Blower Motor Assembly 200-240V
(For models mfd. between June 14, 2006 and October 24, 2006)
819185 1 Blower Motor Assembly 200-240V with Transformer
(For models mfd. between October 25, 2006 and December 20, 2006)
3 100618 1 20 MFD Capacitor 120V
(For models mfd. as of September 1, 2006)
100639 1 32 MFD Capacitor 120V
(For models mfd. prior to September 1, 2006)
100638 1 8 MFD Capacitor 200-240V
(For models mfd. prior to June 14, 2006 and as of December 21, 2006)
100670 1 5 MFD Capacitor 200-240V
(For models mfd. between June 14, 2006 and October 24, 2006)
100639 1 32 MFD Capacitor 200-240V with Transformer
(For models mfd. between October 25, 2006 and December 20, 2006)
4 130119 1 L190 Automatic Thermostat
5 185084 1 Blower Housing Formed with Back Draft Damper
818545 1 Blower Housing Made In-House
6 818986 1 Exhaust Temperature Sensor Assembly
7 122003 1 Lint Door Switch
8 318993 1 Rear Electrical Box (Gas and Steam)
319327 1 Rear Electrical Box (Electric)
318727 1 Rear Electrical Box Cover
9 153021 1 1/4” Shakeproof Washer
10 121010 1 Terminal Lug
11 152002 1 1/4-20 Hex Nut
12 819188 1 Axial Temperature Sensor Assembly
13 152015 1 #8-32 Hex Nut
14 120728 1 Quick-Connect Terminal Block
15 153073 2 #8-32 KEPS Nut
16 122200 2 Sail Switch
17 150025 2 #4-40 x 1” Phillips Screw
18 154004 1 Twin Speed Nut
19 153073 14 #8-32 KEPS Nut
20 819113 1 Heat Duct with Sail Switch Assembly
21 818109 1 Front Left / Rear Right Wheel (Parts Breakdown on page 11)
22 818110 1 Front Right / Rear Left Wheel (Parts Breakdown on page 11)
Parts List

8 American Dryer Corporation 450276-3
Parts Diagram

450276-3 www.amdry.com 9
Parts List
Illus. No. Part No. Qty.Description
1 819314 1 Burner Assembly
819313 1 Burner Chamber
2 183112 1 Thermostat, Gas High-Limit
3 183144 1 Inshot Burner Tube, Hot Surface Ignition
4 128944 1 Gas Valve 120 VAC 60 Hz
128907 1 Gas Valve 120 VAC 50 Hz
884254 1 Liquid Propane Conversion Kit
5 141318 1 3/8” 90º Union Shutoff
6 140880 1 Natural Gas #22 Burner Orifice
140905 1 Liquid Propane Gas #44 Burner Orifice
7 128910 1 Globar®
8 183145 1 #8-32 x 7/8” Hex Screw with Washer
9 130500 1 Radiant Control
10 185096 1 3/8” N.P.T. Male 90º Gas Pipe
142953 1 1/2” x 3/8” Reducer
11 819579 1 Steam Valve Assembly 120V
12 165066 1 Copper Steam Coil
13 183112 1 High-Limit Thermostat
14 119995 1 Electric Element
15 819712 1 120V to 24V Transformer
819251 1 208V to 24V Transformer
819267 1 240V to 24V Transformer
132029 1 208-240V to 120V Transformer
16 131352 1 40-amp 24V Contactor
131357 1 50-amp 24V Contactor
131321 1 30-amp 120V Contactor
131325 1 50-amp 120V Contactor
131324 1 40-amp 208-240V Contactor

10 American Dryer Corporation 450276-3
S.A.F.E. System Assembly Parts Diagram / List
Illus. No. Part No. Qty.Description
1 143025 1 Nylon Hose Adaptor
2 136987 1 Pressure Switch
3 165120 1 Water Valve
4 143236 1 3/8” Brass Cross
5 143251 1 3/8” Plug
6 318422 1 S.A.F.E. Bracket
7 143581 1 Spray Nozzle
8 143208 1 3/8” Brass Connector
9 143099 1 3/8” OD Copper Tubing