American Dryer Corp. AD-758V User manual

AD-75V / AD-758V
Parts Manual
Phase 7 / Dual Timer / OPL with
Fire Suppression System Options
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: [phone] / Fax: [phone]
E-mail: [e-mail]
www.amdry.com
ADC Part No. 450229-3

Retain This Manual In ASafe Place For Future Reference
American Dryer Corporation productsembody advancedconcepts inengineering,design, and safety. Ifthis product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayedon the equipmentorspecified in theinstallation manualincluded
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________ MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s)_____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or theADC factory. When ordering replacement parts from the
factory,you can FAXyour ordertoADCat [phone]or telephoneyourorder directlytotheADC PartsDepartment
at [phone]. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
FOR YOUR SAFETY
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructionsmust be posted in a prominentlocationnearthedryer.

Table of Contents
Phase 7 OPL Control DoorAssembly ........................................................................................................................4
Coin Control DoorAssembly ......................................................................................................................................5
Dual Timer OPL Control Door Assembly ....................................................................................................................6
Phase 7 OPL Microprocessor Control Panel Assembly .............................................................................................7
Phase 7 Coin Microprocessor Control PanelAssembly .............................................................................................8
Dual Timer “Tap Touch” Controls................................................................................................................................9
Phase 7 Microprocessor Control BoxAssembly ......................................................................................................10
Coin VaultAssembly.................................................................................................................................................11
Dual Timer Control BoxAssembly............................................................................................................................12
Front PanelAssembly ..............................................................................................................................................13
37-1/4” Main DoorAssembly for Models Mfd. as of September 11, 2006 ................................................................14
25-1/2” Main DoorAssembly for Models Mfd. prior to September 11, 2006.............................................................15
Main Door SwitchAssembly for Models Mfd. as of September 11, 2006 .................................................................16
Main Door SwitchAssembly for Models Mfd. prior to September 11, 2006..............................................................17
Tumbler / Support Assemblies .................................................................................................................................18
Lint Drawer / Lint Drawer SwitchAssembly..............................................................................................................19
Idler BearingAssembly.............................................................................................................................................20
Tumbler BearingAssembly ......................................................................................................................................21
Non-Reversing Motor MountAssembly ....................................................................................................................22
Reversing Motor MountAssembly............................................................................................................................24
Sensor BracketAssemblies .....................................................................................................................................26
Direct Spark Ignition BurnerAssembly .....................................................................................................................28
Direct Spark Ignition Burner CEAssembly ...............................................................................................................30
Electric OvenAssembly............................................................................................................................................32
Sail SwitchAssembly ...............................................................................................................................................34
Single-Phase (1ø) Microprocessor Rear Electric Relay PanelAssembly.................................................................35
208-240V 3-Phase (3ø) Microprocessor Rear Electric Relay PanelAssembly ........................................................36
460-480V Microprocessor Rear Electric Relay PanelAssembly ..............................................................................37
208-240V Microprocessor Reversing Rear Electric Relay PanelAssembly .............................................................38
460-480V Microprocessor Reversing Rear Electric Relay PanelAssembly .............................................................39
Single-Phase (1ø) Dual Timer Rear Electric Relay Panel Assembly........................................................................40
460-480V Dual Timer Rear Electric Relay Panel Assembly .....................................................................................42
208-240V Dual Timer Reversing Rear Electric Relay Panel Assembly ....................................................................43
Air-Operated Steam Damper Assembly ...................................................................................................................44
Fire Suppression SystemAssemblies ......................................................................................................................46
Outer Top / Back GuardAssemblies for Models Mfd. as of January 5, 2003 ...........................................................47
Outer Top / Back GuardAssemblies for Models Mfd. prior to January 5, 2003........................................................48
Microprocessor Electric Oven ComponentApplication Chart...................................................................................49
Dual Timer Electric Oven ComponentApplication Chart..........................................................................................50
Additional PartsAvailable .........................................................................................................................................51

4 American Dryer Corporation 450229-3
Phase 7 OPL Control Door Assembly
Illus. No. Part No. Qty.Description
1 883758 1 White OPL Control Door
(includes illus. nos. 1 and 3)
883756 1 Ivory OPL Control Door
(includes illus. nos. 1 and 3)
883759 1 Coral Blue OPL Control Door
(includes illus. nos. 1 and 3)
2 150321 2 #10-32 x 1/2” Phillips Machine Screw
3 117604 4 Noise Suppression Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX PLUS®BTN, Type 1
5 102503 1 Control Door Support Rod
6 154011 2 #10-32 Multi-Thread U-Nut
7 102603 1 Control Door Rod Support Catch
8 102601 1 Control Door Rod Retainer Clip

450229-3 www.amdry.com 5
Coin Control Door Assembly
Illus. No. Part No. Qty.Description
1 160015 1 High Security MK-100 Lock Assembly with Key
160104 1 MK-100 Key ONLY
2 160032 1 Lock Cam ONLY
3 881053 1 ADC Logo with Tape
4 817246* 1 Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
5 817164 1 Black Trim
6 117604 6 Neoprene Sponge Tape (sold by the foot)
7 152014 4 1/4-20 Free Spin Wash Nut
8 150317 2 #10-16 x 3/4” TORX PLUS®BTN, Type 1
150318 1 TORX PLUS®Bit
9 102603 1 Control Door Support Rod Catch
10 102601 1 Control Door Rod Retainer Clip
11 102503 1 Control Door Support Rod
* Specify color when ordering.

6 American Dryer Corporation 450229-3
Dual Timer OPL Control Door Assembly
1 881053 1 ADC Logo with Tape
870011 1 Double Sided Tape Kit
2 883616 1 White Control Door Assembly
(includes illus. nos. 2 and 3)
883618 1 Ivory Control Door Assembly
(includes illus. nos. 2 and 3)
883617 1 Coral Blue Control Door Assembly
(includes illus. nos. 2 and 3)
3 117604 3 Noise Suppression Tape (sold by the foot)
4 150317 2 #10-16 x 3/4” TORX PLUS®BTN, Type 1
5 102603 1 Control Door Rod Support Catch
6 102601 1 Control Door Rod Retainer Clip
7 102503 1 Control Door Support Rod
8 150321 2 #10-32 x 1/2” Phillips Machine Screw
9 154011 2 #10-32 Multi-Thread U-Nut

450229-3 www.amdry.com 7
Phase 7 OPL Microprocessor Control Panel Assembly
Illus. No. Part No. Qty.Description
1 112577 1 Phase 7 OPL Keypad
2 850984 1 Phase 7 OPL Microprocessor Controller (computer) Panel ONLY
3 887003 1 Phase 7.2.2 Board with Fire Suppression System and H2O (pressure) Switch
887000 Phase 7.2.2 Board with Fire Suppression System and no H2O (pressure) Switch
887023 Phase 7.2.2 Board “Dutch” and “Polish” with Fire Suppression System
and H2O Pressure Switch
887024 Phase 7.2.2 Board without Fire Suppression System
4 150005 2 #6-32 x 3/4” Phillips Round Head Machine Screw
5 153010 2 #6 Star Washer
6 136097 1 500 mA Fuse
7 136016 1 5-Amp Fuse

8 American Dryer Corporation 450229-3
Phase 7 Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty.Description
1 137250 1 Phase 7 Coin Ribbon Cable
2 137270 1 16” x 1” Large Character Display
3 887007 1 Phase 7 Coin Board (for models without Fire Suppression System)
887009 1 Phase 7 Coin Board (for models with Fire Suppression System)
887012 2 Phase 7 Coin Board (for models mfd. with Fire Suppression System and H2O switch)
4 112575 1 Phase 7 Keypad
5 153010 4 #6 Internal and External Star Washers
6 150005 4 #6-32 x 1/4” Phillips Round Head Machine Screw
7 152102 4 M3 Metric Hex Nut
8 823145 1 Phase 7 Coin Control Panel ONLY
9 818232 1 Phase 7 25¢ Coin Acceptor Assembly
830159 Phase 7 Programmable Euro Coin Acceptor Assembly
830136 Phase 7 Programmable Shekel Coin Acceptor Assembly
830006 Phase 7 Programmable NZD / AUD / HKD Coin Acceptor Assembly
10 122633 1 3-Pin Connector

450229-3 www.amdry.com 9
Dual Timer “Tap Touch” Controls
Illus. No. Part No. Qty.Description
1 824298 1 15 Minute Timer – 24 VAC
2 824299 1 60 Minute Timer – 24 VAC
3 824175 1 Red Pilot Light – 24 VAC
4 122301 1 “Tap Touch” Switch
5 131932 3 Relay SPST 24v
6 120730 1 30-Position Terminal Block
7 151000 6 #6-32 Pal Nut
8 882903 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
850392 – Dual Timer Panel ONLY
9 153010 2 #6 Star Washer
10 152000 3 #6-32 Hex Nut
11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
13 112563 1 Dual Timer Panel Overlay
14 124104 1 Pure Touch Knob with Red Pointer
15 124105 1 Pure Touch Knob with Blue Pointer

10 American Dryer Corporation 450229-3
Phase 7 Microprocessor Control Box Assembly
Illus. No. Part No. Qty.Description
1 122681 1 10-Pin Connector
2 122676 1 8-Pin Connector
3 122646 1 2-Pin Connector
4 122683 1 6-Pin Connector (OPL computer Only)
5 122640 1 9-Pin Connector
6 122706 * #20-16 U.M.N.L. Socket
7 122669 * Female Crimp Terminal
* As needed.
Illus. No. Part No. Qty.Description

450229-3 www.amdry.com 11
Coin Vault Assembly
Illus. No. Part No. Qty.Description
1 884050 1 Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
823143 1 Microprocessor Coin Vault ONLY
2 160028 1 Cam ONLY for 1/4 Turn Lock
3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
802019 1 1/4 Turn Coin Box ONLY without Faceplate
125915 1 High Security (Greenwald) Coin Box ONLY with Key
5 802018 1 1/4 Turn Coin Box Faceplate ONLY
6 152014 4 1/4-20 Free Spin Wash Nut
7 102502 1 Control Door Support Rod
8 102601 1 Control Door Rod Retainer Clip
9 102603 1 Control Door Rod Support Catch
* Specify key number when ordering.

12 American Dryer Corporation 450229-3
Dual Timer Control Box Assembly
Illus. No. Part No. Qty.Description
1 122641 1 15-Pin Connector
2 122706 15 Socket Terminal
122801 1 Pin / Socket Terminal Extraction Tool … Not Illustrated
3 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
4 884252 1 Reversing Timer 24 Volt (for reversing dual timer models Only)

450229-3 www.amdry.com 13
Front Panel Assembly
Illus. No. Part No. Qty.Description
1* 801604 1 Front Panel Assembly
(for models mfd. as of September 11, 2006)
(includes illus. nos. 1, 7, and 8)
802267 1 Front Panel Assembly
(for models mfd. prior to September 11, 2006)
(includes illus. nos. 1, 5, and 6)
2 150313 11 #10-16 x 1/2” TORX PLUS®
150318 1 25 IP TORX PLUS®Bit 1/4 Hex (for removal of TORX®head screw)
3 881152 1 Main Door Hinge Block Assembly (top)
881151 1 Main Door Hinge Block Assembly (bottom)
4 –––––– 1 Lint Drawer Switch
(refer to Lint Drawer / Lint Drawer Switch Assembly on page 19)
5 881987 1 Friction Door Latch Kit
(includes illus. nos. 5 and 6)
6 154215 2 5/32” Pop Rivet
7 102004 2 0.750 Round Door Magnet
8 152223 2 1/2” TORX®Head Screw
* Specify color when ordering.

14 American Dryer Corporation 450229-3
37-1/4” Main Door Assembly
For Models Mfd. as of September 11, 2006
Illus. No. Part No. Qty.Description
1 835128 1 Main Door Hinge
2 314729 1 Main Door Handle
3 102357 1 Door Gasket
170731 1 Black Adhesive (10.3 oz. cartridge)
4 102221 1 Door Glass
170731 1 Black Adhesive (10.3 oz. cartridge)
5 152014 6 1/4-20 Free Spin Wash Nut
6 150683 6 1/4-20 x 5/8” Carriage Bolt
7 801600 1 Main Door Assembly Complete
8 185522 2 Main Door Magnet Bracket

450229-3 www.amdry.com 15
25-1/2” Main Door Assembly
For Models Mfd. prior to September 11, 2006
Illus. No. Part No. Qty.Description
1 881150 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170731 1 Black Gasket Adhesive (10.3 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
5 153031 1 1/4” Nylon Washer
6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
8 150683 3 1/4-20 x 5/8” Black Carriage Bolt
9 152014 3 1/4-20 Free Spin Wash Nut
10 151010 1 #10-32 Black Hex Acorn Nut
11 150120 1 Door Latch Screw
12 150683 3 1/4-20 x 5/8” Black Carriage Bolt
13 152014 3 1/4-20 Free Spin Wash Nut
14 881210 1 Black Main Door Handle ONLY
15 102211 1 20-7/16” Door Glass
170731 1 Black Glass Adhesive (10.3 oz. cartridge)

16 American Dryer Corporation 450229-3
Main Door Switch Assembly
For Models Mfd. as of September 11, 2006
Illus. No. Part No. Qty.Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Single-Pole Door Switch
5 150445 4 1/4-20 x 3/4” Cap Screw
6 882866 1 Black Main Door Switch Housing
883338 1 Black Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 881151 1 Bottom Hinge Block
(includes illus. nos. 5, 8, and 10)
9 881152 1 Top Hinge Block
(includes illus. nos. 5 and 9)
10 153031 1 Nylon Washer

450229-3 www.amdry.com 17
Main Door Switch Assembly
For Models Mfd. prior to September 11, 2006
Illus. No. Part No. Qty.Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw
2 152013 2 #6-32 Hex Nut
3 153010 2 #6 Star Washer
4 137005 1 Door Switch
5 122636 2 Flag Terminal
6 881211 1 Black Main Door Switch Housing ONLY
881153 1 Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw

18 American Dryer Corporation 450229-3
Tumbler / Support Assemblies
Illus. No. Part No. Qty.Description
1* 859032 1 Tumbler ONLY without Felt Collar
(for models mfd. as of September 11, 2006)
800708 1 Tumbler ONLY without Felt Collar
(for models mfd. prior to September 11, 2006)
859305 1 Tumbler and Support Assembly Complete
(for models mfd. as of September 11, 2006)
800816 1 Tumbler and Support Assembly Complete
(for models mfd. prior to September 11, 2006)
(includes illus. nos. 1 through 10)
2 150313 40 #10-16 x 1/2” TORX PLUS®Crimptite Screw
150429 1 TORX®Hand Driver (for removal of TORX®head screw)
3 390074 4 Tumbler Rib ONLY
(for models mfd. as of September 11, 2006)
301308 4 Tumbler Rib ONLY
(for models mfd. prior to September 11, 2006)
4 150518 1 5/16-18 x 3/8” Socket Button Head Screw
5 100905 4 3/8-16 x 37” Tie Rod
6 153004 4 3/8” Flat Washer
7 800613 1 Tumbler Support ONLY
8 152005 4 3/8-16 Hex Nut
9 153005 4 3/8” Lock Washer
10 153004 4 3/8” Flat Washer
11 116000 1 Felt Collar ONLY
— 401010 1 #847 Adhesive for Felt Collar
12 115986 1 Felt Pad
* Felt collar is not included and must be ordered separately.

450229-3 www.amdry.com 19
Lint Drawer / Lint Drawer Switch Assembly
Illus. No. Part No. Qty.Description
1 884055 1 White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
884056 1 Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
884057 1 Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
884149 White Lock Lint Drawer with Bag
884150 Blue Lock Lint Drawer with Bag
884151 Ivory Lock Lint Drawer with Bag
160001 1 AD100 Lock with 1 Key / Hardware … Not Illustrated
160052 1 1” Cam with 3/16” Offset … Not Illustrated
160103 Key ONLY … Not Illustrated
2 117605 5 Neoprene Sponge Tape (sold by the foot)
3 108222 1 Lint Screen Assembly
4 122605 * 4-Pin Connector (female)
5 122116 1 Lint Drawer Switch
6 833123 1 Lint Drawer Switch Box Assembly (for micro models Only)
(includes illus. nos. 4 through 6 and 10)
818087 1 Lint Drawer Switch Box Assembly (for dual timer models Only)
(includes illus. nos. 4 through 6 and 10)
304136 1 Lint Drawer Switch Box Cover ONLY
7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
8 122700 * Pin Terminal ONLY
9 122604 * 4-Pin Connector (male)
10 122701 * Socket Terminal ONLY
122801 1 Pin / Socket Extraction Tool … Not Illustrated
* As needed.

20 American Dryer Corporation 450229-3
Idler Bearing Assembly
Illus. No. Part No. Qty.Description
1 100108 1 5L-680 V-Belt (tumbler to idler)
2 101140 1 14” x 3” Compound Pulley
3 100194 1 4L-720 V-Belt (idler to motor) for Non-Reversing Models ONLY
100109 1 4L-650 V-Belt (idler to motor) for Reversing Models ONLY
4 154301 2 5/16-18 x 1” Allen Setscrew
5 100705 1 3/16” x 3/16” x 1-3/8” Key
6 882576 1 Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
7 150617 2 3/8-16 x 1” Hex Head Machine Bolt
8 153005 2 3/8” Lock Washer
9 153004 2 3/8” Flat Washer
10 801009 1 Idler Square Washer
11 152004 1 5/16-18 Hex Nut
12 150509 1 5/16-18 x 3” Hex Head Machine Bolt