American Lubrication Equipment TIM-315-COMP2 User manual

Superior Technology at an Affordable Price®
TIM-315-COMP2
WASTE OIL DRAIN MANUAL
AMERICAN LUBRICATION EQUIPMENT CORPORATION
11212A MCCORMICK ROAD, HUNT VALLEY, MD 21031
WWW.AMERICANLUBE.COM
CONTACT: 410-252-9300

B
A
E
F
E
F
1
Assembly
Fig.1: Insert the handle (B) into its seat and secure it with the screws provided.Position the
tool tray (A).
Fig.2: Attach drain tube (C) to drain bowl (D) and lock into place by tightening the hex nut.
Fig.3: Using a suitable wrench, connect the assembly from step 2 to the reservoir tank by
tightening the collar (E).
Operation
Fig.4: To raise and lower the catch basin
loosen knob (F),move the basin to
the desired height and re-tighten
knob (F).
CAUTION: Never fill the reservoir over the maximum level indicated by the gauge that
is located on the side of the reservoir
WARNING
Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the
safety rules and other basic safety precautions may result in serious personal injury.
Save these instructions in a safe place and on hand so that they can be read when required.
Keep these instructions to assist in future servicing.
SAFETY PRECAUTIONS
GENERAL SAFETY RULES
WARNING: Read and understand all instructions.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must
be understood
by the operator that common sense and caution are factors which cannot be
built into this
product, but must be supplied by the operator.
WARNING
• For waste oil use only.
• Do not expose the reservoir to any source of heat.
• While extracting high temperature oils, keep hands and face protected.
• Only use the device for the purpose for while it has been designed.
• Do not modify any component of the equipment.
• Only use original spare parts.
C
D
Fig.1 Fig.2
Fig.3 Fig.4

Exploded Parts Diagram and Parts List
2
No.
1
2
3
4
5
6
7
8
*13
14
15
16
Description
Filter
Funnel 1" BSP (M)
Rotor 1"BSP (Male)
Set Screw M6x1 (Each)
O-ring 32.9mm IDx2.6mm DIA (Pair)
Rotor 1"BSP (Female)
Tube 1"BSPT
Tool Tray
Casters Sold As Pair
Acorn Nut M12x1.75 (Each)
Plain Washer (Each)
Spring Washer (Each)
Part No.
TIM-317-38
TIM-317-37C
TIM-317-36
TIM-317-34
TIM-317-35H
TIM-315-6
TIM-317-31
TIM-317-24
TIM-317-4
TIM-317-6
TIM-317-5
TIM-317-41
QTY
1
1
1
1
2
1
1
1
4
4
4
4
No.
17
18
19
20
21
*22
23
24
25
26
27
28
Description
Handle
Screw M6x1
Nut 1"BSP
Spring
Knob M12x1.75
Seat M52x2 & M12x1.75
Elbow (Each)
Nut (Each)
Tube With Label
Connector 3/4" NPT (F)
Funnel Extender
Plug With O-ring 3/4''BSP
Part No.
TIM-317-20
TIM-317-17
TIM-317-30
TIM-317-29
TIM-317-26
TIM-315-22
TIM-317-7
TIM-317-8
TIM-317-9
TIM-181
TIM-317-39
TIM-317-PLUG
QTY
1
2
1
1
1
1
2
2
1
1
1
1
* TIM-317-4 caster bag includes two each of the following: wheels, flat washers, lock washers, nuts.
* TIM-315-22 contains two vent holes for pump sunction.
27
1
2
3
45
6
7
8
13
15
16
14
17
18
19
20
21
22
23
24
25
26
28

4
19
20
22
3
21
6
5
7
3
Exploded Parts Diagram
No.
3
5
4
6
7
22
21
20
19
Description
Rotor (Male)
O-ring
Set Screw
Rotor (Female)
Tube
Seat
Knob
Spring
Nut
QTY
1
2
1
1
1
1
1
1
1
3.02.02.399 REV 05/10/22