American Megatrends Series 906 User manual

TERM A Jumper
Jump pins one and two to enable termination.
Jump pins two and three to disable termination.
No jumpers allows for auto termination.
TERM B Jumper
Jump pins one and two to enable termination.
Jump pins two and three to disable termination.
No jumpers allows for auto termination.
SAF-TE
Jump one and two for ID Six.
Jump two and three for ID Eight.
SLOT ID
Jump one and two for hard drive ID Zero through Five.
Jump two and three for hard drive ID Ten through Fifteen.
J17 JUMPER TO DISABLE SAF-TE
Disable SAF-TE = Short this jumper.
Enable SAF-TE = No Jumper (Recommended).