American Signature 1913-112HKR User manual

ASSEMBLY INSTRUCTION
ITEM # : 1913-112HKR KG PANEL HDBD-DAKOTA GRAY
NOTE : THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED ! !
HARDWARE LIST
DESCRIPTIONNO. QTY
1
2
3
4
BOLT
FLAT WASHER
SPRING WASHER
ALLEN KEY
4
4
1
4 M6 x 35
M6 x 19
M6
M4
5
6
PARTS LIST
DESCRIPTIONNO. QTY
A HEADBOARD PANEL 1
PAGE: 1/2
MADE IN MALAYSIA
B LEG (R) 1
C LEG (L) 1
D STRETCHER 1
7
8
BOLT
FLAT WASHER
SPRING WASHER
ALLEN KEY
6
6
1
6M8 x 40
M8 x 18
M8
M5
STEP 1
1
2
3
4
A
B
C
D
567
8
9 STRAIGHT ALLEN KEY 1
M4
10 STRAIGHT ALLEN KEY 1
M5
OR
10
OR
9
TOOLS REQUIRED (NOT PROVIDED)
PHILIP SCREW DRIVER 1 PC

ASSEMBLY INSTRUCTION
ITEM # : 1913-112HKR KG PANEL HDBD-DAKOTA GRAY
NOTE : THIS ITEM NOT RECOMMENDED FOR COMMERCIAL USE
KEEP THIS DOCUMENT FOR REFERENCE IN CASE PARTS ARE NEEDED
DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED ! !
HARDWARE LIST
DESCRIPTIONNO. QTY
1
2
3
4
PARTS LIST
DESCRIPTIONNO. QTY
A HEADBOARD 1
PAGE: 2/2
MADE IN MALAYSIA
B FOOTBOARD 1
C SIDE RAIL 2
E VERTICAL LEG 8
BOLT
FLAT WASHER
ALLEN KEY
8
1
8M8 x 20
M8 x 18
M5
D SLAT 4
PANHEAD SCREW 8M4 x 32
ITEM # : 1913-112FKR KG PNL FTBD & SLTS-DAKOTA GRAY
ITEM # : 1913-107RLR QN/KG PANEL RAILS-DAKOTA GRAY
STEP 1: Attached Side Rails (C) to Headboard (A)
and Footboard (B) by using the Flat Washer (2),
Allen Bolt (1) and tighten with Allen Key (3).
STEP 3: Attached Slats (D) to
Side Rails (C) by using Screw (4)
and tighten with Screw Driver
(Not included). Assembly of
product is now completed.
5
D
STEP 2: Secure Supports Leg (E)
to Slats (D) by turning clockwise
direction.
E
D
4
1
3
5
STRAIGHT ALLEN KEY 1
M5
OR
6
(1940 x 42 x 17mm)
(219 x 29 x 29mm)
TOOLS REQUIRED (NOT PROVIDED)
PHILIP SCREW DRIVER 1 PC
2
6
SPRING WASHER 8M8