American Signature IA34-412D User manual

06-19-2018
Page1/5
Thankyou for purchasing thisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethecartonduringshipment.
UNITSHOULDBEINSTALLEDBY2ORMOREPERSONS.
BEFOREUSINGTHISPRODUCTPLEASEREAD,UNDERSTAND,ANDFOLLOWTHESEINSTRUCTIONS.
Savetheseinstructionsforfuturereference.
All Bedsneedtobeset upintheexact final
locationsothatafterfullassemblyit will not
needtobemoved. Moving thebedwill cause
thesupport legstomoveoutof perpendicular
(90 degree),weakenthesupportsystem, and
mayallowthebedtocollapse.
FORINDOORUSEONLY
MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
IA34-403D
IA34-412
COMPONENTS LIST:IA34-412
No. Description Sketch Quantity
1Headboard 1PC
2LeftLeg 1PC
3RightLeg 1PC
4WoodStretcher 1PC
5CenterSupportLeg 1PC
TOOLSREQUIRED(NOTPROVIDED)
PHILLIPS SCREWDRIVER
COMPONENTS LIST:IA34-402
No. Description Sketch Quantity
1Bedrails 2PCS
2Slats 4PCS
COMPONENTS LIST:IA34-403D
No. Description Sketch Quantity
1Footboard 1PC
2SupportLeg(forcenterrail) 2PCS
3Decking 4PCS
4Center rail 1PCS
IA34-402
HARDWARELIST:IA34-402
No. Description Sketch Quantity
IHangerBolt5/16"*3" 8PCS
JHalfMoonWasher5/16" 8PCS
KHexNut5/16" 8PCS
LHexWrench90*25*2mm 1PC
MWoodScrewM4*1-1/4" 8PCS
HARDWARELIST:IA34-403D
No. Description Sketch Quantity
NBolt1/4"*1-1/4" 8PCS
OLockWasher5/16" 8PCS
PFlatwasher 5/16x3/4" 8PCS
QAllenWrench4mm 1SET
RWoodScrewM4*1 8PCS
HARDWARELIST:IA34-412
No. Description Sketch Quantity
ABolt 5/16"*2" 6PCS
BBolt5/16"*1-1/2" 4PCS
CBolt1/4"*1-1/4" 4PCS
DLockWasher 5/16"10PCS
EFlatWasher 5/16"*3/4" 10PCS
FLockWasher 1/4"4PCS
GFlatWasher 1/4"*3/4" 4PCS
HAllenWrench4mm 1SET
ITEMNO: IA34-412/402/403D
QUEENSTORAGEBED-ROSALIECHESTNUT

06-19-2018
Page2/5 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
STEP1:Puttheheadboardfacedownon a
softsurface.Attachtheleftlegand right
legtoheadboardbyusing6bolts(A), lock
washers(D)and flat washers(E). HBBackside
STEP2:Attachthewoodstretcher
tothelegsbyusing4bolts(B), lock
washers(D)and flat washers(E).
LeftLeg
Right Leg
HBBackside
WoodStretcher
STEP3:Attachthecentersupport leg
toheadboardandwood stretcherby
using4bolts(C),lockwashers(F)and
flat washers(G).
Center SupportLeg
Slatbearerin
upperposition
Slatbearerin
lowerposition
STEP4:Thesiderailsmaybeusedon eitherside.
Arrangethesiderailssotheslatbearersarein
UPPERPOSITIONpriortoattachmentinSTEP5.
A
D
E
H
D
E
BH
C
F
G
HHBBackside
ITEMNO: IA34-412/402/403D
QUEENSTORAGEBED-ROSALIECHESTNUT

06-19-2018
Page3/5 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
STEP5:Screwthebolts(I)intoHB&FB.Aligntheboltswiththeholesintheend ofsiderails
andattachthesiderailstoHB&FBusinghalfmoonwashers(J)and nuts(K).Thenuseahex
wrench(L)totightenall thenuts.
STEP6:Attachcenterrailtothefootboard andcentersupportlegofheadboardusing 4bolts(N),
lockwashers(O)andflatwashers(P).
Makesuretheslatbeareris
intheUPPERposition.
Slatbearer
SideRail
SideRail
SideRail
I
JKL
NOP
QCenterrail
Centerrail
ITEMNO: IA34-412/402/403D
QUEENSTORAGEBED-ROSALIECHESTNUT
Theoutsideholesmatchto-402rails,
theinsideholesmatchtoHollywoodframe.

06-19-2018
Page4/5 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
STEP7:Attach2supportlegs(for centerrail)tothecenter
railusing4bolts(L),lockwashers(M)andflatwashers(N).
UsetheAllenWrench(O)totightenall ofthebolts.
CenterRail
SupportLeg
(forcenterrail)
Leveler
LMN
O
MSTEP8:Place theslatsintheright position
markedby thespacerblocksandattachslats
totheslatbearerswithwoodscrews(M).
NOTE:Theslatsmustbeplacedfrom the
headboardtothefootboard.
STEP9:Putthedeckingovertheslats,securedeckingtotheslatswithwood screws (R)through the
pre-drilledholesinthedeckingasshownbelow.
Slat
Decking
Decking
Theslat shouldsupport
bothpiecesofdecking.
Decking
Pre-drilledhole
Makesurethatthereisaslat
underthepre-drilledhole.
R
ITEMNO: IA34-412/402/403D
QUEENSTORAGEBED-ROSALIECHESTNUT

FUNCTIONALITY INSTRUCTION
06-19-2018
Page5/5 MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
1PoweredUSBPortfor
Charging on bothsides
IA34-412
IA34-402
IA34-403D
Cedar-linedStorageDrawers
ITEMNO: IA34-412/402/403D
QUEENSTORAGEBED-ROSALIECHESTNUT

04-12-2018
TOOLSREQUIRED(NOTPROVIDED)
Page1/1
ITEMNO:IA34-4502-DRAWERNS-ROSALIECHESTNUT
Thankyou for purchasing thisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethecartonduringshipment.
BEFOREUSINGTHISPRODUCTPLEASEREAD,UNDERSTAND,ANDFOLLOWTHESEINSTRUCTIONS.
Savetheseinstructionsforfuturereference. FORINDOORUSEONLY
MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
PHILLIPS SCREWDRIVER
HARDWARELIST:
No. Description Sketch Quantity
ABolt5/16''x1-3/4" 8PCS
BLockWasher 5/16'' 8PCS
CFlatWasher 5/16''*5/8" 8PCS
DAllenWrench4mm 1SET
TippingRestraintHardware 1SET
COMPONENTS LIST:
No. Description Sketch Quantity
1Case 1PC
2Leg 4PCS
STEP1:Putthecaseupsidedownonasoftsurface, Attachthe
legstothebottomof casebyusing8bolts(A), lockwashers(B)
andflatwashers(C).Returnthecasetotheupright position.
B
A
C
D
FUNCTIONALITY INSTRUCTION
Felt-linedTopDrawer
Cedar-linedBottom Drawer
LeveleronLegs
Adjusttheleveler
whennecessary
Pullout Panel
2ACoutlet PowerPack
Felt-linedHiddenDrawer
Leveler
Leg
CaseBottom
2"

HARDWARELIST:
No. Description Sketch Quantity
ABolt5/16''x1-3/4" 8PCS
BLockWasher 5/16'' 8PCS
CFlatWasher 5/16''*5/8" 8PCS
DAllenWrench4mm 1SET
TippingRestraintHardware 1SET
04-12-2018
Page1/1
Thankyou for purchasing thisqualityproduct.Besuretocheckallpacking material carefullyfor
small partsthatmaycomelooseinsidethecartonduringshipment.
BEFOREUSINGTHISPRODUCTPLEASEREAD,UNDERSTAND,ANDFOLLOWTHESEINSTRUCTIONS.
Savetheseinstructionsforfuturereference. FORINDOORUSEONLY
MADEIN VIETNAM
ASSEMBLYINSTRUCTIONS
R
RR
TOOLSREQUIRED(NOTPROVIDED)
PHILLIPS SCREWDRIVER
COMPONENTS LIST:
No. Description Sketch Quantity
1Case 1PC
2Leg 4PCS
3SupportLeg 1PC
STEP1:Putthecaseupsidedownonasoft
surface, Attachthelegsandsupportlegto
thebottomof caseby using 8bolts(A),lock
washers(B)andflatwashers(C).Returnthe
casetotheuprightposition.
B
A
C
D
FUNCTIONALITY INSTRUCTION
Leveler
Leg
CaseBottom
LeveleronLegs& SupportLeg
Support Leg
Leveler
Adjusttheleveler
whennecessary
Felt-linedTopDrawers
Cedar-linedBottomDrawers
Removable Jewelry tray
OpenDrawertoFlipupDrawer
2"
ITEMNO:IA34-455TALLDRESSER-ROSALIECHESTNUT

V Mount
Assembly instructions for the V
mount are in the V mount package.
Follow these instructions when
attaching V mount and V to the
V frame.
hank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING HIS PRODUC PLEASE READ, UNDERSAND, AND FOLLOW HESE INSRUCIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
OOLS REQUIRED (NO PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIS:
No. Description Sketch Quantity
A Bolt Ø1/4"*1-1/4" 8 PCS
B Lock Washer Ø1/4" 8 PCS
C Flat Washer Ø1/4" *3/4" 8 PCS
D Allen Wrench 4mm 1 SE
COMPONENS LIS :
No. Description Sketch Quantity
1 V Frame 1 PC
2 Metal Strip 2 PCS
3 V Mount 1 Set
FUNCIONALIY INS RUCION
Leveler on Legs &
Support Leg
Adjust the leveler
when necessary
04-12-2018
Page 1/2
IEM NO: IA34-487 V PANEL MOUN-ROSALIE CHESNU
MADE IN VIE NAM
ASSEMBLY INSRUCIONS
R
RR
IA34-487
IA34-455

A
B
C
D
all Dresser Back
A
B
C
D
Metal Strip
SEP 1: Attach the metal strips to inner sets of threaded inserts on the tall dresser by using 4 bolts
(A), lock washers (B) and flat washers (C). See below. Do not tighten the bolts completely.
all Dresser Back
all Dresser Back
Metal Strip
SEP 2: Attach the metal strips to the V frame by using 4 bolts (A), lock washers (B) and
flat washers (C). ighten all the bolts on V frame and tall dresser with Allen wrench.
Metal Strip
04-12-2018
Page 2/2
IEM NO: IA34-487 V PANEL MOUN-ROSALIE CHESNU
MADE IN VIE NAM
ASSEMBLY INSRUCIONS
R
RR