American Signature 2638-52B User manual

ASSEMBLY INSTRUCTIONS
THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. BE SURE TO CHECK ALL PACKING MATERIAL
CAREFULLY FOR SMALL PARTS THAT MAY HAVE COME LOOSE INSIDE THE CARTON DURING SHIPMENT.
NO DESCRIPTION QTY
A 54" TV CONSOLE 1 PC
B BUN FEET 4 PCS
C SUPPORT LEG 1 PC
NO DESCRIPTION SKETCH SIZE QTY
a
TIPPING RESTRAINT 1 set
STEP 1
Important note:
The furniture tipping restraint is stapled to the back of the TV CONSOLE.
The bun feet and support leg are put in a box, located inside the door.
The shelf can be removable.
Page 1 of 1 MADE IN VIETNAM
HARDWARE LIST:
STEP 1: Attach bun feet (B) and support leg (C) to the bottom of TV CONSOLE (A) by turning clockwise.
SKETCH
ITEM NO.: 2638-52B
54" TV CONSOLE-HANOVER
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PARTS LIST:

ASSEMBLY INSTRUCTIONS
THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. BE SURE TO CHECK ALL PACKING MATERIAL
CAREFULLY FOR SMALL PARTS THAT MAY HAVE COME LOOSE INSIDE THE CARTON DURING SHIPMENT.
NO DESCRIPTION QTY
A 64" TV CONSOLE 1 PC
B BUN FEET 4 PCS
C SUPPORT LEG 2 PC
NO DESCRIPTION SKETCH SIZE QTY
a
TIPPING RESTRAINT 1 set
STEP 1
Important note:
The furniture tipping restraint is stapled to the back of the TV CONSOLE.
The bun feet and support leg are put in a box, located inside the door.
The shelf can be removable.
Page 1 of 1 MADE IN VIETNAM
HARDWARE LIST:
STEP 1: Attach bun feet (B) and support leg (C) to the bottom of TV CONSOLE (A) by turning clockwise.
ITEM NO.: 2638-62B
64" TV CONSOLE-HANOVER
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PARTS LIST:
SKETCH

ASSEMBLY INSTRUCTIONS
THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. BE SURE TO CHECK ALL PACKING MATERIAL
CAREFULLY FOR SMALL PARTS THAT MAY HAVE COME LOOSE INSIDE THE CARTON DURING SHIPMENT.
NO DESCRIPTION QTY
A 74" TV CONSOLE 1 PC
B BUN FEET 4 PCS
C SUPPORT LEG 2 PCS
NO DESCRIPTION SKETCH SIZE QTY
a
TIPPING RESTRAINT 1 set
STEP 1
Important note:
The furniture tipping restraint is stapled to the back of the TV CONSOLE.
The bun feet and support leg are put in a box, located inside the door.
The shelf can be removable.
Page 1 of 1 MADE IN VIETNAM
HARDWARE LIST:
STEP 1: Attach bun feet (B) and support leg (C) to the bottom of TV CONSOLE (A) by turning clockwise.
ITEM NO.: 2638-72B
74" TV CONSOLE-HANOVER
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PARTS LIST:
SKETCH

ASSEMBLY INSTRUCTIONS
THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. BE SURE TO CHECK ALL PACKING MATERIAL
CAREFULLY FOR SMALL PARTS THAT MAY HAVE COME LOOSE INSIDE THE CARTON DURING SHIPMENT.
NO DESCRIPTION QTY
A TOP 1 PC
B DRAWER BASE 1 PC
STEP 1 CLEG 4 PCS
NO DESCRIPTION SKETCH SIZE QTY
a
ALEEN KEY 4 x 74 x 29mm 1 pc
b
BOLT ∮1/4"x 15 x 51mm 8 pcs
c
SPRING WASHER ∮1/4"x∮11x 2mm T 16 pcs
d
FLAT WASHER ∮1/4"x∮18 x 2mm T 16 pcs
e
BOLT ∮1/4"x 15 x 76mm 8 pc
f
STRAIGHT ALLEN KEY 4*100mm 1 pc
STEP 2
Page 1 of 1 MADE IN VIETNAM
ITEM NO.: 2638-02
LIFT TOP CKTL TABLE-HANOVER
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PARTS LIST:
SKETCH
STEP 1: Attach leg (C) to the top (A) by using allen key (a), bolt (b), spring washer (c) and flat washer (d).
STEP 2: Attach drawer base (B) to the leg (c) by using allen key (a), bolt (e), spring washer (c) and flat washer (d).
HARDWARE LIST:

ASSEMBLY INSTRUCTIONS
THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. BE SURE TO CHECK ALL PACKING MATERIAL
CAREFULLY FOR SMALL PARTS THAT MAY HAVE COME LOOSE INSIDE THE CARTON DURING SHIPMENT.
NO DESCRIPTION QTY
A TOP 1 PC
B DRAWER BASE 1 PC
CLEG 4 PCS
STEP 1
NO DESCRIPTION SKETCH SIZE QTY
a
ALEEN KEY 4 x 74 x 29mm 1 pc
b
BOLT ∮1/4"x 15 x 51mm 8 pcs
c
SPRING WASHER ∮1/4"x∮11x 2mm T 16 pcs
d
FLAT WASHER ∮1/4"x∮18 x 2mm T 16 pcs
e
BOLT ∮1/4"x 15 x 76mm 8 pc
f
STRAIGHT ALLEN KEY 4*100mm 1 pc
STEP 2
Page 1 of 1 MADE IN VIETNAM
ITEM NO.: 2638-05
END TABLE-HANOVER
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PARTS LIST:
SKETCH
HARDWARE LIST:
STEP 1: Attach leg (C) to the top (A) by using allen key (a), bolt (b), spring washer (c) and flat washer (d).
STEP 2: Attach drawer base (B) to the leg (c) by using allen key (a), bolt (e), spring washer (c) and flat washer (d).