American Standard Heritage 3073.046 User manual

HERITAGE™ 2-PC EL 1.6
ELONGATED TOILET
VITREOUS CHINA
HERITAGE™ 2-PC EL 1.6
❏2176.124
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action bowl with concealed
trapway
• Internal trapway area fully glazed
• Close-coupled tank
• Design-matched solid plastic seat and
cover (#005357-016) included
• Chrome-plated side mounted trip lever
• 2 concealed bolt covers
• 100% factory flush tested
❏3073.046 Bowl (includes seat)
❏4074.039 Tank
Fixture only, supply by others
Nominal Dimensions:
762 x 464 x 699mm
(30" x 18-1/4" x 27-1/2")
Hydraulic performance, water surface area,
trap seal depth, ballpass diameter, and all
fixture dimensions meet or exceed
ANSI Standard A112.19.2 requirements.
To Be Specified
❏Color:
❏Trip Lever: 730283-XXX0A
❏002 Chrome (supplied)
❏020 White
❏021 Bone
❏099 Polished Brass
❏094 Gold
❏Supply with stop:
© 1995 American Standard Inc. TBU-021
SPS 2176
406 mm
(16)
699 mm
(27-1/2)
FINISHED WALL
762 mm
(30)
457 mm
(18)
191 mm
(7-1/2)
305 mm
(12)
356 mm
(14)
SUPPLY AS
REQUIRED
114 mm
(4-1/2)
89 mm
(3-1/2)
140 mm
(5-1/2)
464 mm
(18-1/4)
C/L OF SEAT POST HOLES
241 mm
(9-1/2)
FINISHED
FLOOR
337 mm
(13-1/4)
25 mm
(1)
C/L OF
OUTLET
*
127 mm
(5)
203 mm
(8)
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM
(12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
*DIMENSIONS SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance
established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
These measurements are subject to change or cancellation. No responsibility is assumed for use