American Standard Madera 15" Height 1.6 GPF Flushometer Toilet... User manual

M55
© 2008 AS America Inc. Revised 12/08
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Seat:
❏ American Standard #5901.100 Heavy duty open
front less cover
❏ American Standard #5905.100 Extra heavy duty
open front less cover
❏ Flushometer Valve:
❏ American Standard Selectronic™ #6065.161.002
DC Power (Top Spud)
❏ American Standard Selectronic™ #6065.261.007
DC Power (Back Spud)
❏ American Standard Selectronic™ #6067.261.007
AC Power (Back Spud)
❏ American Standard Selectronic™ #6068.261.007
Multi AC Power (Back Spud)
MADERA™ 15" HEIGHT
1.6 GPF FLUSHOMETER TOILET
MADERA™ 15" HEIGHT
• Floor mount ushometer valve toilet
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• EverClean® surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Fully glazed 2-1/8" trapway
• Elongated bowl
• 10" or 12" roughing-in
• 15" rim height
• Condensation channel
• Powerful direct-fed siphon jet action
• 10" x 12" water surface area
• 1-1/2" inlet spud
• 2 bolt caps
• 100% factory ush tested
❏ 3451.160 Elongated bowl only, top spud
❏ 3452.160 Elongated bowl only, top spud with
slotted rim for bedpan holding (White only)
❏ 3453.160 Elongated bowl only, back spud
❏ 3455.160 Elongated bowl only, back spud with
slotted rim for bedpan holding (White only)
Component Parts:
❏ 047007-0070A Inlet Spud (furnished with bowl)
❏ 481310-100 Bolt caps with retainers
(furnished with bowl)
Nominal Dimensions:
718 x 356 x 381mm
(28-1/4" x 14" x 15")
Fixture only, less seat and ush valve
Recommended working pressure–between
25 psi at valve when ushing and 80 psi static
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
• CAN/CSA International B45
SEE REVERSE FOR ROUGHING-IN DIMENSIONS

M56
© 2008 AS America Inc.
NOTES:
PRODUCT 3451.160 AND 3453.160 SHOWN, 3452.160 AND 3455.160
SAME AS EXCEPT WITH SLOTTED RIM FOR BED PAN HOLDING.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST
VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM
FINISHED WALL TO C/L OF OUTLET.
FLUSHOMETER VALVE NOT INCLUDED WITH FIXTURE AND MUST BE
ORDERED SEPARATELY. FLUSHOMETER VALVE REQUIREMENTS FOR
12" (305MM) ROUGH-IN: SWEAT EXTENSION NIPPLE IS REQUIRED.
REFER TO VALVE MANUFACTURER AND LOCAL CODES.
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
1 - 1/2
SPUD
121mm
(4-3/4) 673mm
(26-1/2)
238mm
(9-3/8)
381mm
(15)
470mm
(18-1/2)
356mm
(14)
338mm
(13-5/16)
150mm
(5-7/8)
254mm
(10)
13mm
(1/2)
25mm
(1)
102mm
(4)
718mm
(28-1/4)
C/L OF SEAT POST HOLES
140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
1" N.P.T. OR 1" C.W.T. SUPPLY
TO FLUSH VALVE
MADERA™ 15" HEIGHT
1.6 GPF FLUSHOMETER TOILET
238mm
(9-3/8)
381mm
(15)
400mm
(15-3/4)
470mm
(18-1/2)
356mm
(14)
338mm
(13-5/16)
150mm
(5-7/8)
254mm
(10)
13mm
(1/2)
76mm
(3)
718mm
(28-1/4)
C/L OF SEAT POST HOLES
140mm (5-1/2) CENTERS
FINISHED WALL
FINISHED
FLOOR
C/L OF OUTLET
3451.160/3452.160
3453.160/3455.160
Revised 12/08