American Standard Town Square Right Height Elongated Toilet... Operating and safety instructions

K45
© 2008 AS America Inc.
TOWN SQUARE®
RIGHT HEIGHT™ ELONGATED TOILET
VITREOUS CHINA
TOWN SQUARE® RIGHT HEIGHT™
ELONGATED TOILET
❑ 2797.016
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Elongated siphon action jetted bowl with
2" trapway
• AquaForce ushing technology
• 16-1/2" Rim height for accessible applications
• American classic styling on bowl and tank
design matched to pedestal and
countertop lavatories
• Front-mounted chrome trip lever design
matched to Town Square faucets
• Design matched molded elongated Town
Square seat and cover (5725.027) included
• 2 bolt caps
• Internal trapway area fully glazed
• 100% factory ush tested
❑ 3797.016 Bowl
❑ 4707.016 Tank
Nominal Dimensions:
743 x 508 x 857mm
(29-1/4" x 20" x 33-3/4")
Fixture and seat only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specied:
❏ Color:
❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black
❏ Alternate Seat:
❏ Supply with stop:
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
483mm
(19)
C/L OF SEAT POST
MTG HOLES ON
140mm (5-1/2) CTRS
429mm
(16-7/8)
152mm (6)
381mm (15)
273mm
(10-3/4)
857mm
(33-3/4)
C/L OF SUPPLY
AS REQUIRED
FINISHED
FLOOR
13mm (1/2)
89mm (3-1/2)
305mm
(12)
508mm
(20)
* 152mm (6)
*203mm
(8)
C/L OF OUTLET AND
TOILET MTG BOLTS
743mm
(29-1/4)
203mm
(8)
25 ± 6mm (1 ± 1/4)
FINISHED WALL
C/L
391mm
(15-3/8)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
Revised 2/08