American Standard Townsend 0555.104 Operating and safety instructions

J9
© 2008 AS America Inc.
TOWNSEND
PEDESTAL SINK
VITREOUS CHINA
TOWNSEND PEDESTAL SINK
• Vitreous china
• Turn-of-the-century detailing on lavatory
and pedestal
• Front overow
• Supplied with mounting kit
• Faucet ledge with large deck area
(faucet not included)
❏ 0555.801 Faucet holes on 203mm (8") centers
(Illustrated)
❏ 0555.401 Faucet holes on 102mm (4") centers
Nominal Dimensions:
619 x 495 x 900mm
(24-3/8" x 19-1/2" x 35-7/16")
❏ 0555.108 Lavatory slab-203mm (8") centers
❏ 0555.104 Lavatory slab-102mm (4") centers
❏ 734906-401 Pedestal only
Bowl sizes:
489mm (19-1/4") wide,
289mm (11-3/8") front to back,
146mm (5-3/4") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAPS
ARE SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTING NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
FINISHED
WALL
495mm
(19-1/2)
619mm
(24-3/8)
89mm
(3-1/2)
203mm
(8)
212mm
(8-1/2)
PEDESTAL ANCHORING
SCREW HOLES
8mm (5/16) DIA.
260mm
(10-1/4)
REF.
203mm
(8)
203mm
(8) 178mm
(7)
13mm
(1/2) DIA.
HOLES FOR
ANCHOR BOLTS
900mm
(35-7/16)
*578mm
(22-3/4)
*521mm
(20-1/2)
51mm
(2)
229mm
(9)
1-1/4 O.D.
WASTE
SUPPLIES AS
REQUIRED
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
PEDESTAL
SIDE SECTION
To Be Specied:
❏ Color: ❏ White
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
* See faucet section for additional models available
Revised 2/08