American Standard FloWise 3073.216 User manual

K40
Revised 2/08
© 2008 AS America Inc.
FloWise® DUAL FLUSH RIGHT HEIGHT™
ELONGATED TOILET WITH SEAT
❏ 2480.216
• Vitreous china
• Meets denition for HET (High Efciency Toilet)
• Low-consumption Dual Flush Toilet
• Qualies in LEEDS Program
Full ush 6.0 Lpf/1.6 gpf,
Partial ush 3.0 Lpf/0.8 gpf
• Elongated wash down bowl
• Internal trapway fully-glazed,
2-5/8" (67mm) trapway
• Concealed trapway bowl
• 16-1/2" rim height for accessible applications
• Chrome-plated top mounted push
button actuator
• Sanitary Dam on bowl
• Includes color-matched plastic seat and cover
• 100% factory ush tested
• 2 color matched bolt caps
• 2 year warranty
❏ 2480.516
• Same as above, except with tank
with Aquaguard liner
Separate Component Parts:
❏ 3073.216 Elongated Bowl
❏ 4035.216 Unlined Tank
❏ 4035.516 Tank with Aquaguard Liner
Alternate Tank Congurations Available:
❏ 4035.516 Lined Tank
Nominal Dimensions:
31-1/4" x 17" x 31-7/8"
(794 x 432 x 810mm)
Fixture and seat only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M
• CSA B45 series
• City of Los Angeles Supplemental
Purchase Specication
• UNAR
• US EPA WaterSense Specication for HETS
FloWise® DUAL FLUSH
RIGHT HEIGHT™ ELONGATED TOILET
VITREOUS CHINA
NN

NN

NN

$-0'065-&5
'*/*4)&%8"--
164)
#6550/
NNNN



NN

$-
NN

$-0'4&"51045)0-&4
NN$&/53&4
NN

'*/*4)&%
'-003
NN

NN

NN

NN

NN
 NN

NN

4611-:
"4
3&2h%
NN

To Be Specied:
❏ Color: ❏ White
❏ Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12”) FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS
SUPPLIED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2 These measurements are
subject to change or cancellation. No responsibility is assumed for use of super-
seded or voided pages
Certified by
IAPMO R&T
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.