Ameriwood HOME 5799339COM User manual

5799339COM
5 Drawer Dresser
B345799339COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 2
ESTIMATED ASSEMBLY TIME: 2 HOURS

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Tube
You

5
ameriwoodhome.com
Board Identification
Not actual size
Left Panel
35799339010 Right Panel
35799339020
Bottom
357993390040 Drawer Front (x4)
35799339060
Top
35799339030 Support
35799000050
Upper Drawer Front
35799339070 Drawer Side (x8)
39991167346200C Drawer Back (x4)
39991167060190B
Upper Drawer Back
39991120060190B Back Panel
K579900000
CE
F
D
G
H
AB
Drawer Bottom (x5)
39991341061210D
Upper Drawer Side (x2)
39991120346200C
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
DWR
BACK
DWR
BACK
DWR
SIDE
DWR
SIDE
DWR
BTM

6
ameriwoodhome.com
Board Identification
Not actual size
This piece is paperboard
construction. It is not made
from wood, but is required for
the assembly of your unit.
DWR
BACK
DWR
BACK
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
SIDE
AB
C
D
E
FG
H
DWR
BTM
DWR
BTM
x4 x1

7
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
(x6)
#A22620
cam lock
10
6
(x6)
#A22610
cam bolt
(x6)
#A21670
wood dowel
(x50)
#A11080
#6 x 7/16" flat head
(x62)
#A12120
#8 x 7/16" pan head
3
8
5
(x28)
#A21110
nail
(x10)
#A17400
8-32 x 7/8" truss
(x20)
#A21970
drive fastener
(x4)
#A23030
confirmat
1
2
4
11 12
(x2)
#A54510
drawer bracket (small)
(x8)
#A54520
drawer bracket (large)
7
9a
9b
9c
9d
9
#A84050
safety bracket kit

8
ameriwoodhome.com
Part List
Not Actual Size
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x5)
#A56770
drawer slide pkg.
13a
13b
13c
13d
(x5)
#A51715
handle
13
(x5)
#A54900
drawer brace (x1)
#A95660
metal base kit
14
15
16

9
ameriwoodhome.com
STEP1
(x2)
#A22620
3
(x1)
#A22610 (x2)
#A21670
2
3
2
finished edge
1
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
13a
Left Cabinet Member
31
13a
13a
13a
13a
13a
8
(x15)
#A11080
8
A
8
8
8
8
8
(x5)
#A56770
13a
8

10
ameriwoodhome.com
STEP2
(x2)
#A22620 (x1)
#A22610 (x2) #A21670
3
2
finished edge
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
13b
1
Right Cabinet Member
123
8
(x15)
#A11080
B
3
8
13b
13b
13b
13b
13b
8
8
8
8
8
(x5)
#A56770
8
13b

11
ameriwoodhome.com
STEP3
(x4)
#A22610
9a
9b
#A84050
Do not fully
tighten screw.
2
2
2
2
C
2
9b
9a

12
ameriwoodhome.com
STEP4
13
(x2)
#A22620 (x2)
#A21670
1
1
3
3
E
Proper orientation of CAM LOCK
Tip
Assembly
Quick

13
ameriwoodhome.com
STEP5
UNLOCKLOCK
A
E
B
finished edges will face up

14
ameriwoodhome.com
STEP6
A
B
C
UNLOCKLOCK
finished edges will face up

15
ameriwoodhome.com
STEP7
(x4)
#A23030
4
A
DB
C
finished edges will face up
4
44
unfinished
surface

16
ameriwoodhome.com
STEP8
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, turn the unit over on its front side. Position back panel as shown.
Align squarely with outer edges. Flush bottom edge of back panel with bottom edge of the bottom
and nail straight into back edges of left panel (A), right panel (B), top (C) and bottom (D).
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
Make sure edge of back panel is
flush with bottom edge of the
bottom.
H
D
B
(x28)
#A21110
10
10

17
ameriwoodhome.com
STEP9
(x1)
#A95660
16

18
ameriwoodhome.com
STEP10
5
D
A
B
16
(x12)
#A12120
5
5
5
With the help of another
person, carefully position
the unit as shown.

19
ameriwoodhome.com
STEP11
5
11 12
x5
5
12 12
DWR
SIDE DWR
SIDE
(x2)
#A54510
(x8)
#A54520
(x20)
#A12120
For this step, you will apply eight large drawer brackets (12) to eight large drawer sides and
apply two small drawer brackets (11) to two small upper drawer sides.
55
5

20
ameriwoodhome.com
STEP12
5
5
F
DWR
SIDE
DWR
SIDE
G
x4
x1
(x20)
#A12120
5
5
5
Note, the large drawer sides go on the large
drawer front (F) and the small drawer sides to
the upper drawer front (G).
Be sure the grooves in the drawer sides are
centered with the groove in the drawer fronts.