AMG-Sicherheitstechnik NR-03 Quick start guide

• Emergency call wristband and collar transmitters are
factory-made already coupled to the charging cradle.
• Please deactivate the PIN code of the SIM card before use.
Please use a telephone to deactivate the SIM PIN.
•The phone numbers for police / fire department / ambulance
(911) can not be dialed or saved as phone numbers!
YOUR AMG TEAM

Seite 1 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
29/11/2019 (17)
Quick Start Guide
In short, you need to follow these steps:
1) Disable PIN lock of the SIM card
2) Open the device and insert the SIM
3) Save the number
Done - the emergency call device is now ready for use
Please deactivate the PIN lock on the SIM card first, otherwise
the emergency call device will not be able to access it for call &
SMS. You can insert these into a telephone and deactivate the
PIN in the settings under Security.
Please open the device by loosening the 3 screws with the
provided screwdriver.
Please insert the SIM card.
NR-03 Emergency transmitter for home & on the way
with base station

Seite 2 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Now you can send the A1 command to the SIM card number of
the emergency device from the phone. Please have a look at
the screenshot.

Seite 3 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
If you save the number successfully, you will receive a
confirmation.
If a 2nd number is to be stored, please send the command B1
from the corresponding telephone and from a third telephone
the command C1.
If you press the SOS button, a call will be triggered.
All stored numbers will then be called in succession and an SMS
will be sent with the position as Google Maps Link.

Seite 4 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
An emergency SMS looks like this:
When you leave your home, please take the black handset out
of its holder and carry it with you. You can trigger an
emergency call via the SOS button.
If you are at home, please plug the black handset into the
charging cradle, then you can trigger an emergency call via the
red emergency call button.

Seite 5 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Quick Start Guide ............................................................................................................1
Device description (buttons and connections).....................................................6
Preparation.........................................................................................................................7
Teaching sensors .............................................................................................................8
Delete all learned sensors............................................................................................8
Switching the GPS emergency call transmitter on and off .............................9
Description of the LED function .................................................................................9
App AMG MessageDirect for programming the NR-03.....................................9
Note for the formatting of any command SMS....................................................9
Setting the time zone ..................................................................................................10
Power saving settings ..................................................................................................10
Fall sensor ........................................................................................................................10
battery alarm...................................................................................................................11
Save phone numbers ...................................................................................................12
SOS emergency..............................................................................................................13
Manual GPS location.....................................................................................................13
Set number for side key ............................................................................................. 13
Turn off beeps.................................................................................................................14
Switch LEDs on and off ...............................................................................................14
Switch off the SMS alarm...........................................................................................14
Switch off alarm call .....................................................................................................14
Automatic call acceptance..........................................................................................14
Cancel automatic call acceptance restriction......................................................14
Setting up the PIN request for the GPS emergency call transmitter ........15
Change PIN code ...........................................................................................................15
Check setting by SMS ..................................................................................................15
Restart of the device ....................................................................................................16
Set device to factory settings...................................................................................16
Common mistakes.........................................................................................................16

Seite 6 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Device description (buttons and connections)
Base Station:
Important note for the use of the emergency call system in the apartment
The GSM emergency call device NR-03 has an intelligent control for the built-in
microphone and the loudspeaker.
To prevent feedback (feedback occurs when the microphone picks up the sound of the
loudspeaker and then forwards it to the caller, whose microphone in the phone would
then pick up the sound from its own speaker, and so the sound would go on forever run
the round, which then leads to a loud beep, a feedback).
Teach-in button for sensors
(press with a pointed
object)
Connection for the USB charger
signaler
LED indicator (front)
(only visible with
electricity)
= Status LED

Seite 7 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
To prevent this, the microphone and speakers are controlled electronically up and down.
If e.g. the called person speaks into their phone, the sound is output from the speaker of
the NR-03. At this moment, the microphone in the NR-03 down regulated, so it does not
come back to feedback.
As soon as the person called does not speak anymore and the loudspeaker in the NR-03
does not have to spend any more, the microphone raises its sensitivity again. Now voices
can be clearly understood from a distance of 3-4 meters in the telephone of the called
person. It is therefore important in the use of the emergency call system that is spoken
consecutively, with 1-2 seconds each break in between, so the electronics can perform
the necessary settings and you can talk in usable quality.
The NR-03 is suitable for home and on the road. At home, the black device is plugged
into the charging cradle so that it is always supplied with mains power. The collar and
bracelet transmitters only serve to start the emergency call device and establish a
connection. For this purpose, these transmitters send a short radio signal to the receiver,
which is located in the base of the charging cradle. As soon as the radio signal is received
for 3 seconds, the emergency call device starts its connection. Since the collar and
bracelet transmitter are only rarely used they can be used with a battery for about 2
years, the replacement battery type 27A, you can order in the online shop of your
retailer or shop.amg-alarmtechnik.de.
Note:
The GSM reception depends on the used SIM card. If you do not receive a
service with a network provider, please use another provider.
For the correct operation of the GPS module, the device should be located
outdoors.
Preparation
SIM cards size:
To use the GPS emergency transmitter, a micro SIM card is required (no nano or
standard SIM size!
Note:
Please note that a prepaid card will be disabled after a period of inactivity. Depending on
the provider, this is the case after 3, 6 or 12 months.
To avoid the automatic deactivation of the SIM card, costs have to be incurred once a
month.
Remove SIM card PIN:
Before inserting the SIM card, make sure that it no longer needs a PIN request. If
necessary, the SIM card must be inserted in a mobile phone and the PIN query
deactivated there. The procedure varies depending on the phone manufacturer and can
be requested in the manual or from the manufacturer.

Seite 8 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Inserting the SIM card:
Open the housing by loosening the 3 screws on the back of the device and carefully pull
apart the two halves of the housing. Slide the metal bracket inward and fold it up. Insert
the micro SIM card into the slot, close the metal bracket, and slide the bracket outward
so that the SIM card is secure.
Then plug both halves together again. Make sure that the halves are placed straight on
top of each other. Finally, secure the housing through the 3 loosened screws.
Blue SIM credits charge
There are several ways to charge the SIM card. We will now list these and briefly
describe how the procedure is.
1. ATMs, here you can recharge your credit (for more information about the career,
please ask an employee of the bank branch). If the charge was successful you will
receive an SMS, it is important to put the SIM card in a mobile phone, so that the
credit is booked on.
2. Online charging, here you have to go to Blau.de and then follow the steps until a
code is sent via SMS, which in turn must be entered online. For this purpose, the
SIM card must be placed in a cell phone, so that one receives the SMS and can
enter the code in the online portal of Blau.de.
3. Prepaid charging, here you have to remove the card and place it in a cell phone,
then follow the instructions step by step.
BLUE SIM ONLY USE IN GERMANY
Connection of the base station
Connect the USB cable to the power supply and to the connector on the charging cradle.
The red light on the front of the base station then lights up at a loss. Place the GPS
emergency transmitter in the base station so that the red light illuminates brightly. The
GPS emergency transmitter will now charge.
Teaching sensors
Note: The sensors are delivered factory-installed.
To teach in a sensor, just press the button on the back of the base station once and then
trigger the radio signal from the sensor by pressing the emergency button. If the sensor
has been learned correctly, you will hear a beep from the base station each time it is
triggered.
Delete all learned sensors
To clear all sensors, press and hold the teach-in button on the back of the base station
for more than 5 seconds, then all sensors are deleted from the device and can be re-
taught.

Seite 9 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Switching the GPS emergency call transmitter on and off
We recommend to charge the device for at least 1 hour before the configuration.
To turn on the GPS emergency transmitter, press the on / off switch for about 1 second
until the LEDs light up. When charging via USB or charging station, the device
automatically turns on. (The device takes about 30 seconds to boot up.)
To turn it off, press the on / off switch and the SOS button together for about 1 second
until the LEDs stop lighting and an alert tone sounds.
Description of the LED function
LED
Blue is constantly lit
Blue is flashing fast
Blue is off, or blinking
slowly
meaning
The battery is
charging
Battery capacity is less than 20%
The battery is fully
charged or will not
charge
LED
Blue flashes briefly
every 3 seconds
Blue flashes for a long time every
3 seconds (1 second on, 3 seconds
off)
Blue is out
meaning
The device has
detected a GPS
position
The device has not yet determined
a GPS position
The GPS module is in
sleep mode
LED
Green flashes
briefly every 3
seconds
Green flashes
twice every 3
seconds
Green flashes every 3
seconds for a long time (1
second on, 3 seconds off)
Green is
constantly lit.
meaning
The device is
connected to the
GSM network
Device is
connected to the
GPRS network
The connection to the GSM
network is established
SIM card was
not recognized
App AMG MessageDirect for programming the NR-03
All SMS commands can also be sent via this app, as this app facilitates the programming
of the NR-03, since the commands do not have to be written manually in the SMS /
Messaging app of the smartphone.
Please select in the app NR-02 / -03, save the number of the Sim card, which is in the
NR-03 and then you can select from the list the SMS commands.
For normal operation, you only need to save the phone number (s) to be called
/ notified by SMS in the event of an alarm and the time zone (see below).
Please only perform the programming with the menu "NR-02/03", any other
menu can lead to a faulty setting of the device and cause high costs for your
SIM card.
Note for the formatting of any command SMS
No spaces may be used. Before sending a command text message, please check that
there is no space by using the smartphone function: "auto-complete" or "auto-
correction".

Seite 10 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Setting the time zone
The time zone of the device can be set with the following command and depends on the
Coordinated Universal Time (abbreviation UTC).
The command is TZ immediately followed by the desired modifier, two digits with + and -
before.
For the German summer time is the order: TZ + 02
For the German winter time it is: TZ + 01
The correct time display requires the connection to the GPS satellite. Subsequently, the
time automatically adjusts itself correctly based on the time zone.
Power saving settings
You can choose between 2 different modes.
Send PS1 as SMS text to the GPS emergency transmitter. This mode is preset.
In this mode, SMS and calls can be received. The GPS chip works only when a position
change takes place. If the emergency transmitter is not moved, it saves electricity.
If an emergency call is issued, the current position is transmitted immediately.
Send MODE4 as SMS text to the GPS emergency transmitter to increase the battery life.
In this mode, SMS and calls can be received. The GPS chip is put in a "sleep mode",
which increases the battery life. As soon as the SOS button is pressed, the GPS position
search starts and the GPS is put back into the energy-saving mode after successful
locating.
If an emergency call is issued, the SMS command LOC must be sent to the emergency
transmitter to get the current position.
Fall sensor
The main module of the NR-03 has an integrated case sensor, which can optionally be
activated via SMS command (and deactivated again).
This fall sensor makes it possible to automatically drop off an SMS, or an SMS and a call
to all programmed subscribers when the carrier falls. The SMS will send a Google Maps
link with the last available position.
Please note that a fall sensor is a very inaccurate type of triggering, it can not be
guaranteed that the fall sensor triggers in any emergency, usually a drop height of 1m
and a change in position of the sensor of 45 ° is specified as a trigger criterion.
Functionality:
As soon as the case has been registered, the device starts to beep at short intervals, in
the case of an unwanted trip you now have the option of canceling the alarm by pressing
the SOS button. Otherwise, depending on the setting, an SMS with the message "Fall
Down Alert!" And a Google Maps link of the last ascertainable position, or the SMS and a
call to all programmed subscribers will be sent.

Seite 11 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
SMS commands:
The command to control the fall sensor consists of the abbreviation FL followed by the
desired function, and in the case of FL1 optionally a comma and the desired sensitivity.
The functions are as follows:
0 = switch off sensor (standard)
1 = SMS
2 = SMS and call
Sensitivity can only be set with FL1, with FL2 the additional call is activated, or if the fall
sensor was deactivated, it is activated with the last used sensitivity level.
Once the call function is activated, the sensitivity can be changed with
FL1,[Sensitivity] without deactivating the call.
To deactivate the call again, the fall sensor with FL0 must first be deactivated and can
then be reactivated with FL1, or FL1,[Sensitivity].
Sensitivity can be set from 1 to 9, where 1 is the most sensitive setting and 9 is the
most insensitive, default on delivery 5.
We recommend initially setting the sensitivity to 1 and only gradually reducing it when
there is an increase in unwanted alarms.
Example:
To activate the sensor with SMS sending and maximum sensitivity, the command is:
FL1,1
To activate the sensor with SMS for the last programmed sensitivity, the command is:
FL1
To activate the sensor with call and SMS for the last programmed sensitivity, the
command is:
FL2
To turn off the sensor, the command is:
FL0
battery alarm
If the battery level falls below 20% of its capacity, a message will be sent to the stored
SOS numbers. The battery should then be charged at the next opportunity.
To turn this function on, send the command: Low1
To turn it off again, send: Low0

Seite 12 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Save phone numbers
To save the telephone numbers to be called in case of an emergency call, please proceed
as follows:
Note: without spaces in the text, if they only send A1, B1, or C1, the sender number is
taken over
Command: A1 or a1, the phone number
Example: A1 or a1,123456789
Send with your mobile phone and the contents: A1,xxxxxx to the telephone number of
the NR-03 GPS emergency transmitter. You will receive the message on successful entry:
Mobile phone number 1 OK!
If you want to delete the first phone number, send an SMS with the contents A0 to the
NR-03 GPS emergency transmitter.
Command: B1 or b1, the phone number
Example: B1 or b1,123456789
Send with your mobile phone and the contents: B1,xxxxxx to the telephone number of
the NR-03 GPS emergency transmitter. Upon successful entry, you will receive the
message: Mobile phone number 2 OK!
If you want to delete the second number, send an SMS with the contents B0 to the NR-
03 GPS emergency transmitter.
Command: C1 or c1, the phone number
Example: C1 or c1,123456789
Send with your mobile phone and the contents: C1,xxxxxx to the telephone number of
the NR-03 GPS emergency transmitter. Upon successful entry, you will receive the
message: Mobile phone number 3 OK!
If you want to delete the third phone number, send an SMS with the contents C0 to the
NR-03 GPS emergency transmitter.
Important note when using the twin pack or two NR-03 devices with the same
radio transmitters: Please note that all numbers must be stored in the two handsets if
they are to be triggered at the same time, as otherwise dialing problems may occur.

Seite 13 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
SOS emergency
Up to 3 SOS telephone numbers can be stored.
Trigger on the emergency call device
The emergency call is triggered by pressing the SOS button for 3 seconds. Then a
position message (SMS) is sent to all stored SOS numbers.
Triggering via radio transmitter
While the emergency call device is in the base station (the device must lock
correctly), you can also trigger the alarm using the learned radio transmitters by
pressing and holding the emergency call button on the transmitter for 3 seconds.
Expiry of the emergency call
The 3 SOS numbers are called in turn. If no subscriber accepts the call, the process is
repeated after 5 minutes until a subscriber accepts the call. To end the call, press the
SOS button again.
IMPORTANT NOTE:
When setting up emergency numbers, please check at
what point the mailbox will be activated by the
subscriber.
(about 40 times ring each mailbox different)
Perform a test run with all stored telephone numbers, so
that the person's SOS emergency call does not get stuck
in the mailbox !!!
Manual GPS location
Send the command LOC via SMS to the GPS emergency transmitter.
This command will send you the current coordinates as a link via SMS.
Example:
"GPS Info! Time: xxxxx; Lat: xxxx; Lon: xxxxx; Spd: xxxx; Altitude: xxxx Bt: xxx
maps.google.com/maps?q=loc:22.647379,114.030998
The coordinates are always sent as latitude and longitude with a Google Maps link, which
directly displays the position of the person. We recommend using the Google Maps link.
Set number for side key
You can choose which of the 3 programmed phone numbers you want to call when
pressing the side key by simply sending the following command:
X1 = for the first number
X2 = for the second number
X3 = for the third number
By default, the second number is set.

Seite 14 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Turn off beeps
With this command you can control the beep sounds when pressing the SOS key.
beep1 can be used to switch off the beep tones and then the device will only vibrate
when the SOS button is pressed.
With beep0 they are switched on again.
Switch LEDs on and off
Send LED1 as SMS text to the GPS emergency transmitter to turn off the LEDs on the
unit.
To switch the LEDs on again, send LED0 as SMS text.
Switch off the SMS alarm
You can deactivate the sending of SMS messages by pressing the SOS key with the
command SMS0, then only the call will be stopped in case of an alarm (if it has not been
switched off as well).
To turn SMS sending back on send: SMS1
Switch off alarm call
You can switch off the automatic call by pressing the SOS key with the command CALL0,
then only the SMS will be canceled in the case of an alarm (if it has not been switched off
as well).
To turn the call back on send: CALL1
SMS Define the name of the emergency call station
For the GPS emergency transmitter, a name can be specified, which is sent at the
beginning of each reply SMS. This helps identify multiple devices. Send the following text
text message to the phone number of the GPS emergency transmitter:
Name1,Matthias
Replace the name "Matthias" accordingly with the desired name. To delete the name,
send the text name0.
Automatic call acceptance
If you call the device from one of the three SOS numbers, the device will answer the call
automatically after a short time and set up a voice connection.
Cancel automatic call acceptance restriction
With this command, the automatic acceptance of all calls can be controlled.
To enable automatic answering of all calls, send Z1.
To only accept calls from SOS numbers automatically, send Z0.

Seite 15 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Setting up the PIN request for the GPS emergency call transmitter
Send the command 123456Lock via SMS to the GPS emergency transmitter.
After this command, you need a password for all settings or command SMS (except for a
restart or RESET!).
Example:
123456LOC, 123456A1 etc. (default password is 123456)
To deactivate the password lock, send an SMS to the GPS emergency transmitter with
the command 123456unlock.
Change PIN code
Send the command Old password + H + new password via SMS to the GPS emergency
transmitter.
Example:
123456H666666
The password has now been successfully changed to 666666.
* The default password will not be cleared by inserting a new SIM card.
* The new password should have a minimum length of 6 numbers.
Check setting by SMS
Send the Status command via SMS to the GPS emergency transmitter.
As an answer you will receive eg:
A + 8613812345678 B13912345678 C13712345678; Speed: 0.100km / h; GEO: 0,0,0;
VB: 1,10S; MV: 1,100M; LBS: 0; LED: 0; TZ: 2.0; LI: 1; PS: 1; DS: 0.3M; FL: 1; Bat:
95%; SMS: 0; LOCK: 0; CALL: 1; RT: 1
The number "0" indicates that the function is off.
The number "1" indicates that the function is on.
The information is as follows:
A, B, C
The respective programmed telephone numbers
Speed, GEO, VB,
MV, LBS und RT
refer to alarm functions that are in the test
as unreliable and therefore not supported by us
LED
refers to the ability to disable the two LEDs on the side
TZ
is the currently set time zone
PS
is one of the power saving settings
DS
is another power save setting that is not practical for this unit
FL
is the fall sensor
Bat
is the current battery level
SMS
Alarm SMS
LOCK
Protection of the device by SMS PIN
Call
Alarm call

Seite 16 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Restart of the device
Send the command reboot via SMS to the GPS emergency transmitter.
The device restarts automatically without changing the settings.
Set device to factory settings
Send the command RESET! via SMS to the GPS emergency transmitter.
Note: This command will reset all settings to factory defaults.
If you need to perform a device reset, then send an SMS with the command S0 to
deactivate the GPRS data connection.
Please check afterwards with the SMS command G1 the current data settings, here you
should see if GPRS is switched on (1), or off (0).
If it is on (1), please send the SMS command "S0", so that the connection is switched off
again.
Please also look at the green LED, when the device establishes a data connection, it
flashes twice briefly every 3 seconds, instead of just once.
ALL DATA GOES LOST !!!
Common mistakes
Error Description
Solution
The base station sounds a beep without being triggered
Presumably, external signals have been taught in, please
delete all learned signals (see page 8) and learn the radio
transmitters again, making sure that no foreign signals
register in the base
After changing / inserting the SIM card, the device does
not log in
Presumably the device was not correctly switched off
when removing / inserting the SIM card, please restart
the device (see page 9) and make sure that the device is
always completely switched off before removing a SIM
card.
The device sends wrong GPS coordinates
Presumably, the device has not yet been able to establish
a sufficient connection to the GPS satellite network,
please try to trigger the black handset under the open
sky. Note: for the GPS positioning a visual connection to
the sky is necessary, otherwise the device sends the last
known position, depending on the setting of the energy
saving mode, this can be very old, therefore is in the SMS
always the time (date, time) on this Position was
determined.

Seite 17 von 17
AMG Sicherheitstechnik GmbH Industriepark Straße A-9 39245 Gommern Telefon [phone] Freecall 0800-2264264* 
Fax [phone] www.amg-sicherheitstechnik.de [e-mail] 
Geschäftszeiten sind von 8-17 Uhr, außerhalb dieser Zeit ist ein Anrufbeantworter geschaltet
*) kostenlos aus dem deutschen Festnetz und allen deutschen Mobilfunknetzen
Safety instructions:
Please follow the instructions to extend the life of the device:
1. Do not use & store the device in a dusty environment.
2. Do not place the device in overheated or overheated areas.
3. Clean the device with a dry cloth. Do not clean the device with chemicals or cleaning agents.
4. Use with other batteries may destroy the device and render it unusable.
Technical specifications:
• Dimensions: 63 x 45 x 15 (H x W x D)
• Weight: 41 g
• Battery: 800 mAh
• GSM module: GSM 850/900/1800/1900 MHz quadband
• Radio frequency: 433 MHz
• GPS accuracy: up to 5 m
• Working temperature: -20 ° C to +80 ° C
• Humidity: min. 5% / max. 95%
General information:
When using sensors such as wristbands or necklaces, make sure that the cradle is
powered.
The bracelet or Collar transmitter does not have a fall sensor / microphone /
speaker !!! These are only in the main unit (NR-03).