AMI Marine X300 User manual

AMI Marine Ltd
Unit 9 Crosshouse Centre,
Crosshouse Road, Southampton,
SO14 5GZ, United Kingdom
Registered in England & Wales
Registration No. GB 195442583
Quality Standard ISO9001:2008
Tel: [phone]
Email: [e-mail]
Web: www.amimarine.com
X300
USER GUIDE

Tel: [phone] Email: [e-mail] Web: www.amimarine.com
Overview:
X300 is a compact and ultra-light NMEA 0183 testing tool with oscilloscope function.
Contents:
1x X300
2x Probe Lead Sets
1x Protective casing
1x Mini USB Cable
1x User Guide
Dimensions:
Features:
2.8” TFT LCD Screen
Power Switch
Input (CH) Oscilloscope and NMEA Input
Mini USB (Data Download and F/W Upgrade)
Output (WAVE OUT) (Pulse Output and NMEA Output)
Controls:
1. Up/Down: Navigate through menu item.
2. OK: Display/Hide marker or confirm
operation.
3. Left/Right: Change the value of selected
Sub Menu
4. A: Run/Stop
5. B: File save, Fit on Trigger Mode
Support:
Contact us for assistance at [e-mail]
For more products and services visit www.amimarine.com

Tel: [phone] Email: [e-mail] Web: www.amimarine.com
CAUTION: SAFETY INSTRUCTIONS
TO AVOID THE RISK OF DAMAGE TAKE CARE NOT TO CONNECT THE PROBES TO THE WAVE OUT PORT
Specification
ANALOGUE BANDWIDTH
0 ~ 1MHz, 12Bits
MAX. INPUT VOLTAGE
80Vpp (NMEA and Oscilloscope)
HORIZONTAL SENSITIVITY
1us/Div ~ 10s/Div
TRIGGER MODE
Auto, Normal, Single, Scan and Fit
Rising/Falling edge/level trigger
Trig level/sensitivity adjustable with indicator
MEASUREMENT Frequency, Cycle time, Duty cycle
Peak/RMS/Average/DC voltage
Precise vertical/horizontal measurement with markers
Hold/Run
SIGNAL GENERATOR
10Hz ~ 1MHz square wave
Oscilloscope
- Mode
- Voltage Division
- Time Division
- Y-Axis
- X-Axis
- Trigger
- Measure
- File
- Frequency
- Other
Battery Status
|
Measure
|
Time/Div
|
Tr.Mode
/ Status
|
Voltage/Div
|
Tr. Kind
|
|
Info
|
Time Measure
|
Tr. Level
|
Voltage Meaure

Tel: [phone] Email: [e-mail] Web: www.amimarine.com
NMEA 0183 Monitor (MD):
Select ‘MD’ from the right hand menu Up/Down button, and select ‘NMEA Monitor using Left/Right button.
RawData View
Summary View
View Mode: Select RawData/Summary screens using Left/Right button under the ‘DI’ menu
Communication Options: Select Baudrate/Stopbits/Parity under the ‘CO’ menu, and change the value using
Left/Right buttons.
Baudrate: 1,200 ~ 115,200, Stopbits: 1/2, Parity: None/Even/Odd
Automatic Baudrate Detection: Hold the ‘A’ button for more than 1 second will auto detect the incoming data baud
rate. The X300 will detect the input data baudrate automatically, from 1,200 to 115,200 baud.
Summary mode the display will show the analysed NMEA data and any associated errors.
Error Codes: Red-No data for 3s, Violet-Checksum, Yellow=-Length (>82byte)
NMEA Generator (GE):
Select ‘MD’ from the menu using Up/Down button, and select ‘NMEA Generator’ using Left/Right button.
1. NMEA sentence is charged by selecting ‘Sentence’ sub menu in ‘GE’ menu using Up/Down button. Selected
sentence ID is displayed bottom line.
2. Each field in NMEA of the sentence is selected using ‘B’ button. To do this, select ‘FieldData’ sub menu in
‘GE’ menu. Selected field is displayed bottom line.
3. The field data which is selected above can be changed using Left/Right button when ‘FieldData’ sub menu is
selected.