SMART KANAAD SBT XTREME 3G Series User manual

PORTABLE BATTERY TESTER
USER
MANUAL
SBT XTREME 3G
TREME
3G SERIES

SBT XTREME 3G
KEYPAD - FOR SELECTION OF CAPACITY & START TEST
RESULT LED INDICATION- FOR BATTERY CONDITION
ENCLOSURE PORTABLE AND ROBUST- METAL ENCLOSURE
BLACK CLIP - CONNECTION FOR BATTERY NEGATIVE
C D - FOR BATTERY VOLTAGE AND RESULT DISPLAYOMBI ISPLAY
H O - VENTILATION FOR INSIDE HOT AIREAT PENINGS
RED CLIP - CONNECTION FOR BATTERY POSITIVE
FRONT PLATE - FOR MODEL NAME
ADDRESS PLATE - FOR MODEL SERIAL NUMBER AND COMPANY ADDRESS
DIMENSION (mm) : 200(H)x110(W)x50(D)
WEIGHT (KG) : 1.2 KG
OPERATING VOLTAGE : 8VDC TO 14VDC
ACCURACY : 0.01VDC
RANGE AUTOMOTIVE INVERTER
MIN
MAX
2.5AH 180AH
80AH 240AH

STEPS FOR CONDUCTING TEST
MAKE CONNECTIONS
CONNECT RED CLIP TO BATTERY POSITIVE.
CONNECT BLACK CLIP TO BATTERY NEGATIVE.
DISPLAY SHOWS;
BATTERY VOLTAGE
PRODUCT NAME
READY OR NEED CHARGING INDICATION
START TEST & VIEW RESULT
PRESS & RELEASE NEXT KEY.
WAIT FOR TEST TO COMPLETE.
VIEW BATTERY CONDITION ON DISPLAY WITH
LED INDICATION.
SELECT BATTERY CAPACITY
PRESS UP OR DOWN KEY TO CHOOSE
BATTERY CAPACITY.
PRESS & RELEASE NEXT KEY.
DISPLAY SEQUENCE
INDICATIONS
DISPLAY LED
GREEN
BLINK
RED
OFF
OFF
DESCRIPTION
BATTERY IS WEAK
BATTERY IS GOOD
BATTERY IS BAD
VERY LOW VOLTAGE
VERY HIGH VOLTAGE
OFF BATTERY NEEDS CHARGING
SELECT BATTERY TYPE
PRESS & RELEASE NEXT KEY.
PRESS AND RELEASE AUTO/INV KEY TO CHOOSE
AUTOMOTIVE OR INVERTER BATTERY TYPE.

TROUBLESHOOTING
NO DISPLAY BATTERY CONNECTION MAY BE REVERSED.
BATTERY CONNECTIONS MAY BE LOSE.
CLIPS MAY BE CORROSED, RUSTED.
CHARGER MAY BE CONNECTED TO THE BATTERY.
MORE THAN ONE BATTERIES MAY BE IN SERIES.
__
__
__
__
INSTRUCTIONS
FOR BETTER RESULTS,
CHARGE BATTERY BEFORE TEST.
CONFIRM CORRECT AND TIGHT CONNECTIONS.
WAIT FOR AT LEAST 1 MINUTE BETWEEN TWO SUCCESSIVE TESTS.
KANAAD ELECTROMATION SOLUTIONS PVT. LTD.
JOGLEKAR BULIDING, OPP. HOTEL LOTUS, OLD STATION ROAD,
AZAD CHOWK, SANGLI (MAHARASHTRA) - 416416
PHONE : [phone]
MOBILE : [phone]
E-MAIL : [email protected]
WEB : www.kanaad.com, www.kanaad.in
MANUFACTURED BY
MAKE BATTERY TERMINALS CLEAN AND DRY FOR PROPER CONTACT.
ALWAYS SELECT CORRECT BATTERY CAPACITY.
BATTERY UNDER TEST MAY BE DAMAGED.
BATTERY UNDER TEST MAY BE DAMAGED.
BATTERY MAY BE KEPT WITHOUT CHARGING FOR LONG TIME.
BATTERY MAY NOT BE CHARGED PROPERLY.
CLIPS MAY BE CORROSED, RUSTED.