AMIGOPOD PowerConnect W Clearpass 100 Software Quick setup guide

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Dated Tested: 10 April 2007
AmigoPod Version: EngineÆ0.99.35, Radius ServicesÆ0.6.10
Plugins Required: Standard build only
Trendnet Version: 2.0 Release 39
Integration: HTTP Captive Portal
Overview:
The TEW-453APB is a 108Mbps high speed 802.11g Hot Spot Wireless Access Point that offers
advanced wireless security, network management, and Power-over-Ethernet capabilities. Wireless
security features include TKIP and AES algorithms for WPA, and also Radius based MAC authentication.
Integration:
The key feature of the TEW-453APB is its Hot Spot or Universal Access Manager (UAM) functionality
that allows AmigoPod to provide the required RADIUS platform for managed temporary Guest accounts.
UAM is intended for use in Internet cafes, Hot Spots, and other sites where the Access Point is used to
provide Internet Access. If enabled, then HTTP (TCP, port 80) connections are checked. (UAM only
works on HTTP connections; all other traffic is ignored.) If the user has not been authenticated, Internet
access is blocked, and the user is re-directed to another web page – in this case the AmigoPod Web
logins facility.
Although the TEW-453APB supports both internal and external authentication, this integration guide will
focus on the later as the internal authentication dictates the use of the internal Login Page resident on
the AP itself. The Login page is very basic and doesn’t allow for significant customization as is possible
with the AmigoPod Web Logins feature.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 1:
By default the TEW-453APB has an IP address of 192.168.0.228. Please follow the Trendnet User Guide
to gain configuration control of the AP and set the basic IP Addressing to match your networking
environment. Given the RADIUS interaction we strongly recommend the use of a Fixed IP address
setting that is available through the web interface.
Note: Fixed IP Address ______________________ This will be required for a later step.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 2:
Now that a fixed IP Address has been defined the Trendnet AP, this needs to be defined within the
AmigoPod configuration. Typically, the AmigoPod software is installed on an appliance or server with a
fixed IP Address and potentially a locally defined host name. Referring back to your initial installation of
the AmigoPod solution, open a web browser and enter either the IP Address or host name defined during
the installation. You should be presented with a login screen similar to the one below:
Enter your username and password. The default AmigoPod username is admin and the password is
amigopod.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 3:
Once successfully logged into the AmigoPod administration interface, you will be presented with the
AmigoPod Home Page where the RADIUS Services section can be accessed. Click on RADIUS
Services on the screen shown below:

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 4:
From the Radius Services menu, select Network Access Servers:

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 5:
Being a new install, there are currently no NAS entries defined. Click on the Create icon at the top of the
page shown below:

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 6:
Fill out the details of the Create NAS form based on the IP Addressing details defined for the Trendnet
AP in Step 1. Leave the default Other NAS entry for the NAS Type and define a shared secret that will be
configured both here in the AmigoPod and also in the Trendnet in future steps. Once complete click on
the Create NAS Device button.
Note: NAS Shared Secret _______________________ This will be required at a later step.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 7:
Once the NAS has been created, the RADIUS Server needs to be restarted for the changes to take
affect. This can be seen from the warning message shown at the top of the screen and the button below
should be clicked to initiate a restart of the RADIUS services.
Once the RADIUS services have restarted the next step is to create the customized Web Login pages
that the wireless users will be presented with when they attempt to login to the network. Under the
RADIUS Services menu of the left, select the Web Logins menu option to continue onto the next step.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 8:
Being a new install, there are currently no web logins defined. Click on the Create a new web login page
option listed below the table:

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 9:
Complete the following Web Login form based on your local deployment to ensure the correct
descriptions and HTML customization is configured in both the Header and Footer section to match the
brand and messaging of the wireless service being offered. Particular attention needs to be paid to the
following fields to ensure a clean integration with the Trendnet AP:
Submit URLÆThe IP Address here must match the one defined in step 1 followed by the
/uamlogon.htm suffix.
Submit MethodÆThis must be set to POST
Username FieldÆThis needs to be set as hs_username
Password FieldÆThis needs to be set as hs_password

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 9:
Once the Web Login page has been created and saved, it should be tested to ensure it has the correct
look and feel for your wireless clients. This can be done by clicking on the newly created Web Login
page once and selected the Test option that is displayed below the entry:

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 10:
Once the Test button has been clicked, the new Web Login page will be displayed so it can be verified
for layout and content purposes. The URL displayed in the web browser should be recorded for a later
step in the integration.
Note: Web Login URL _______________________ This will be required at a later step.
Step 11 (Optional):
The Trendnet AP allows for the definition of a separate URL that failed login attempts can be sent to.
Typically this page would include tips on how to login or who to contact in the events of login issues. If
the deployment requires this level of information to be provided to the wireless clients, a second web
login page can be created using the procedure above with more specific HTML customization around
what to do in the event of a login failure. Again the URL displayed in the final testing step will need to be
recorded for a future step.
Note: Web Login URL _______________________ This will be required at a later step.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 12:
Returning the web administration interface of the TrendNet AP, the next step is to setup the wireless
network for the guest users. From the Security Profiles screen shown below, select the default Profile
named wireless and click on the Configure button.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 13:
At this point you have the opportunity to rename the Profile to a name that is significant to your
deployment and also define the SSID that is going to be used by your wireless client. Given we are
creating a Hot Spot style service you can chose to leave the Wireless Security System as None to make
the association process as easy as possible for the wireless users. (Alternatively, you may wish to set a
static WPA PreShared Key for a level of encryption over the air – AmigoPod can then be customized to
include this PreShared Key on the print receipts detailing the user’s login credentials). For the example
below, the simple approach of No Wireless Security has been chosen. Once complete, click on the
Configure button listed to the right of the UAM section.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 14:
Enable the UAM feature by selecting the first Check Box at the top of the page. This example is based
on using the External Authentication option and therefore the Login URL and Login Failure URL fields
need to be completed with the URLs collected during Step 10 whilst configuring the AmigoPod.
Additionally, the RADIUS details for the AmigoPod install must also be entered in the subsequent fields
as shown in the example below.
The RADIUS Server Address will be the AmigoPod IP Address used in Step 2 or a Fully Qualified
Domain Name as shown below if your DNS Administrator has added an entry from the AmigoPod.
By default AmigoPod use port 1812 for RADUIS authentication requests.
The Shared Key is the NAS Shared Secret that was configured and recorded during Step 6.
Press Save and Close buttons to exit the UAM Configuration screen.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 15:
Returning to the Security Profiles screen, click on the Apply/Restart button for the changes to take affect.
The reboot of the Trendnet AP may take a couple of minutes but at this point the configuration of the AP
is complete and the next step is to test the solution.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 16:
Using the Wireless Driver software that comes with the wireless adaptor in your laptop or the default
Windows Zero Configuration Utility as shown below connect to the AmigoPod SSID (or local alternative)
that was configured in Step 13.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
A successful connection to the AmigoPod Wireless network can be confirmed by double clicking on the
network icon in the System Tray of the Windows Task bar to reveal the following status window. The
connection duration, speed and signal strength can all be verified from this screen.
Clicking on the Support tab of the same window will confirm that an IP Address has been successfully
configured via DHCP.
If either the Wireless connection has not been established or a DHCP address been configured then
there is an issue with either the setup of the wireless card or potentially support for DHCP on the local
LAN. Please refer to the manufacturers instructions for configuration of the wireless card and/or consult
the local network administrator for advice on DHCP support.

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 17:
Now that the test laptop is successfully connected to the Wireless LAN, the only step remaining is to
login as a guest user. To do this a test user must exist in the AmigoPod database. Returning back to the
AmigoPod Web interface, select Guest Manager from the left hand menu:

AmigoPod Integration Guides – Trendnet TEW-453APB
copyright © 2007 amigopod pty ltd.
Step 18:
Selecting the Create New Guest Account option will present the following form that can be completed
with the details of your test user. Fill out details of the test user including how long the user should have
access to the internet from the Account Expiry drop down box and also the Role that the account should
be assigned to (For more information on creating and defining roles, please see the AmigoPod User
Guide).