Take the earphones out of the charging box; and the headset will automatically
4. Complete the pairing with your phone according to the method described above.
3.
Simultaneously press and hold on the function button until the blue light flashes (the red
and blue lights stop flashing alternately); wait for the headphones to complete the pairing
automatically.
power on and enter into the state of the red and blue lights alternately flashing.
2.
When paired successfully, the right earphone enters into the pairing mode (the r ed and
blue lights flash alternately while the left earphone’s indic ator light does not flash).
1.
Pairing of headpones: Q&A
Q: Why cant my headset be charged?.
A: Please cover the charging box's lid and keep the charging contact clean.
Q: Why can't my headset be powered on?
A: Please recharge it and make sure the headset has enough power. Put the headset into the charging box
to check if the indicator light is constantly red.
Q: Why can’t the two headphones be paired with each other?
A: Put the two headphones back into the charging box for 5 minutes to reset, and then retake them out of
the charging box and pair them according to the method for first use.
Q: The wireless headset’s signal is not good?
A: Bluetooth is a short-range wireless communication technology. When we say that it has a transmission
range of 10 meters, such range does not include all kinds of environment and special circumstances.
Please check whether there is any electromagnetic interference around.
'
13 14
