AMLOGIC S912 User manual

Catalogue
Chapter 1 Overview----------------------------------------------------------------Page 1
Chapter 2 Connection-------------------------------------------------------------Page 2
Chapter 3 remote control---------------------------------------------------------Page 3
Chapter 4 Initial configuration---------------------------------------------------Page 4-5
Chapter 5 Main menu--------------------------------------------------------------Page 6
Chapter 6 Local media play-------------------------------------------------------Page 7
Chapter 7 About App---------------------------------------------------------------Page 8-10
Chapter 8 setting--------------------------------------------------------------------Page 11-14
Chapter 9 DTV------------------------------------------------------------------------Page 15-23
Chapter 10 Update--------------------------------------------------------------------Page 24
Chapter 11 Factory data reset------------------------------------------------------Page 25
Chapter 12 Troubleshooting-------------------------------------------------------Page 26
Chapter 13 Specification------------------------------------------------------------Page 27

Chapter 1 Overview
Appearance and interface
Top Panel
Rear Panel

Chapter 2: Initial configuration
Step 1: At the “Welcome”page, click “Next”
Step 2: Select your favorite language

Step 3: Select output mode
Step 4: Adjust the display position on the watch with your TV set
Step 5: Set up the wired network if you are using a wired home network

Step 6: Set up the Wi-Fi if you are using a wireless home network
Step 7: Press ”Finish”to complete the initial configuration

Chapter 5: Main Menu
5.1 Home
Press Left/Right/Up/Down button on your remote to select items and Press “ok”button to
enter
5.2 Application
Press Left/Right/Up/Down Keys on your remote to select items and Press “ok”button to enter
Press Empty to add your favorite app as a new shortcut, long press shortcut can delete your
favorite app

5.3 Smart App
Smart
Press Left/Right/Up/Down Keys on your remote to select items and Press “ok”button to
enter
5.4 Settings
Press Left/Right/Up/Down Keys on your remote to select items and Press “ok”button to
enter

Chapter 6: Local media play
Press “Application”in main menu to select “file browser”, Press “ok”button to
enter
Select “Local Disk”or “USB”driver, press ”ok”button to enter
`

Click the video, there would pop up a option menu, Select your favorite video player to
Start playing video
Click the music, there would pop up a option menu, Select your favorite music player to
Start playing music

Click the photos, there would pop up a option menu, Select your favorite photo player to
Start playing photos
Chapter 7: About app
7.1 About browser
Press “Application”in main menu select browser

Use Brower to browse the web and visit your favorite websites.
Open multiple webpages, use the Windows menu to switch.
Create a bookmark in the Brower for quick visit
7.1.1 Open Webpage: Click the address bar to bring up the on screen virtual key-board.
Type a URL and then click
7.1.2 Book mark a webpage webpage
Click on the webpage to make a bookmark

Click on the webpage to open a bookmark
7.1.3 open multipage at one time
Open a new page: click

Close a page: click
7.2 About App installer
Click “AppInstaller”in Apps list

Select the driver which APK allocated
Click the APK you want to install

7.3 About multi-screen communication
7.3.1 DLNA
Notice: Please make sure your network is working before use this.
Please make sure your mobile device support this function.
Click “Media Center”in Apps list
Turn on DLNA DMP”and “DLNA DMR”
Turn on DLNA in your android mobile device
Start playing the video,music,photo,in your android mobile device

7.3.2 Airplay
Click “Media center”in Apps list
Turn on “Start AirPlay”
Select video,photo in your iOS device,select share,click Airplay
Select STB device Airplay name displayed in your iOS device and confirm
7.3.3 Micracast

Chapter 8: Setting
You can use setting to re-config your network, display, language… etc.

8.1 Network setting
8.1.1 Wi-Fi setting
Click ”Network settings”, select Wi-Fi, click Wi-Fi settings button to on or off to open Wi-Fi or
close Wi-Fi.
Open Wi-Fi, waiting till Wi-Fi scanning finished, select Wi-Fi network name from the list,
input password, click “connect”

8.1.2 Ethernet Setting
Click ”Network settings”, select Ethernet, if Dynamic IP, when plug Ethernet cable,
Ethernet settings will display “Connected”
If select Static IP, click “static”in IP settings, revise address in IP address bar,Network gateway bar
and DNS bar,click save.

8.1.3 Portable Wi-Fi hotspot
This device can provide Wi-Fi hotspot for other network devices including PC,mobile,Pad…
etc.They can get Free Wi-Fi sevice from this.
Click Wi-Fi hotpot button to on, you can set network SSID name,Securtiy,Password as
following,Password must be 8 digits at least. Click save.Then you can search SSID name in other
network devices with inputting the same password to receive Wi-Fi signal.