AMobile IOT-800 User manual

I
IOT-800
8" Risc-based IoT Terminal
User's Manual
Version 1.0

- II -
This page is intentionally left blank.

- i -
Revision History
Version Release Time Description
1.0 2015.11 Initial release

- ii -
Copyright
Copyright © 2015 AMobile Intelligent Corp. All Rights Reserved.
This document contains proprietary information protected by copyright. No
part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct, indirect,
special, incidental, or consequential damages arising from the use or inability
to use the product or documentation, even if advised of the possibility of such
damages.
About This Manual
This user’s manual provides the general information and installation
instructions for the product. The manual is meant for the experienced users
and integrators with hardware knowledge of personal computers. If you are not
sure about any description in this manual, consult your vendor before further
handling.
We recommend that you keep one copy of this manual for the quick reference
for any necessary maintenance in the future. Thank you for choosing AMobile
products.

- iii -
Contents
Contents
Preface...........................................................................................................v
Declaration of Conformity.....................................................................................v
CE ................................................................................................................v
FCC Class B ................................................................................................v
RoHS...........................................................................................................vi
SVHC / REACH...........................................................................................vi
Safety Symbols .................................................................................................. vii
Important Safety Instructions ............................................................................. vii
General Cleaning Tips.........................................................................................ix
Cleaning Tools.............................................................................................ix
Recommended Cleaning Procedures ..........................................................x
Disposing of the Equipment ................................................................................xi
Additional Information & Technical Support ....................................................... xii
Warranty............................................................................................................. xii
Chapter 1 Introduction................................................................................1
1.1 Product Highlights..........................................................................................2
1.2 Package Contents..........................................................................................2
1.3 Optional Accessories......................................................................................3
1.4 Parts of the Device.........................................................................................4
1.5 Dimensions ....................................................................................................5
1.6 Specications.................................................................................................6
Chapter 2 Installation..................................................................................8
2.1 microSD Card Installation ..............................................................................9
2.2 Wi-Fi/Bluetooth Antenna Installation ..............................................................9
2.3 SIM Card and 3G/4G Antenna Installation (Optional) ..................................10
2.4 Power Connection........................................................................................11
2.4.1 Using the DC Terminal Block Connector...........................................11
2.4.2 Using the Power Adapter (Optional)..................................................12
2.5 GPS Mouse Connection (Optional)..............................................................12
2.6 Mounting the Device ....................................................................................13
2.7 Connector Pintouts.......................................................................................13
2.7.1 PWPIN ..............................................................................................13
2.7.2 GPIO and CAN Bus ..........................................................................13
Chapter 3 Using the Device......................................................................15
3.1 Turning On/Off the Device............................................................................16
3.2 Home Screen ...............................................................................................16

- iv -
Contents
3.2.1 Using the Quick Settings Panel.........................................................18
3.3 Congurations..............................................................................................19
3.3.1 Conguring Your SIM Card (Optional)...............................................19
3.3.2 Enabling Wi-Fi and Connecting to a WLAN ......................................20
3.3.3 Enabling Bluetooth and Pairing with Bluetooth Device .....................20
3.3.4 Enabling the Ethernet Feature ..........................................................22
3.3.5 Enabling Location Service (Optional)................................................23
3.3.6 Enabling and Using the NFC Features (Optional).............................23

- v -
Preface
Declaration of Conformity
CE
The CE symbol on your product indicates that it is in compliance with the
directives of the Union European (EU). A Certicate of Compliance is available
by contacting Technical Support.
This product has passed the CE test for environmental specications when
shielded cables are used for external wiring. We recommend the use of
shielded cables. This kind of cable is available from AMobile. Please contact
your local supplier for ordering information.
FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Any changes or modications not expressly approved by the guarantee of this
device could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
Preface

- vi -
Preface
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
RoHS
AMobile Intelligent Corporation certies that all components in its products
are in compliance and conform to the European Union’s Restriction of Use
of Hazardous Substances in Electrical and Electronic Equipment (RoHS)
Directive 2002/95/EC.
The above mentioned directive was published on 2/13/2003. The main purpose
of the directive is to prohibit the use of lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl
ethers (PBDE) in electrical and electronic products. Member states of the EU
are to enforce by 7/1/2006.
AMobile Intelligent Corporation hereby states that the listed products do not
contain unintentional additions of lead, mercury, hex chrome, PBB or PBDB
that exceed a maximum concentration value of 0.1% by weight or for cadmium
exceed 0.01% by weight, per homogenous material. Homogenous material
is dened as a substance or mixture of substances with uniform composition
(such as solders, resins, plating, etc.). Lead-free solder is used for all
terminations (Sn(96-96.5%), Ag(3.0-3.5%) and Cu(0.5%)).
SVHC / REACH
To minimize the environmental impact and take more responsibility to the
earth we live, AMobile hereby conrms all products comply with the restriction
of SVHC (Substances of Very High Concern) in (EC) 1907/2006 (REACH
--Registration, Evaluation, Authorization, and Restriction of Chemicals)
regulated by the European Union.
All substances listed in SVHC < 0.1 % by weight (1000 ppm)

- vii -
Preface
Safety Symbols
This symbol of “CAUTION” indicates that there is a danger of injury to
the user or a risk of damage to the product, should warning notices be
disregarded.
This symbol indicates electrical warning.
Important Safety Instructions
Read these safety instructions carefully:
1. Read all cautions and warnings on the equipment.
2. Place this equipment on a reliable surface when installing. Dropping it or
letting it fall may cause damage
3. Make sure the correct voltage is connected to the equipment.
4. For pluggable equipment, the socket outlet should be near the equipment
and should be easily accessible.
5. Keep this equipment away from humidity.
6. Disconnect this equipment from the A/C outlet before cleaning it. Use a
moist cloth. Do not use liquid or sprayed detergent for cleaning.
7. To fully disengage the power to the unit, please disconnect the power from
the AC outlet.
8. Do not scratch or rub the screen with a hard object.
9. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax,
Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display. Harsh
chemicals may cause damage to the cabinet and the touch sensor.
10. Remove dirt with a lightly moistened cloth and a mild solvent detergent.
Then wipe the cabinet with a soft dry cloth.
11. The openings on the enclosure are for air convection and protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
12. Position the power cord so that people cannot step on it. Do not place
anything over the power cord.

- viii -
Preface
13. If the equipment will not be used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.
14. Never pour any liquid into openings. This may cause re or electrical
shock.
15. Never open the equipment. For safety reasons, the equipment should be
opened only by qualied service personnel.
16. If one of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user’s manual.
e. The equipment has been dropped or damaged.
f. The equipment has obvious signs of breakage.
17. The sound pressure level at the operator’s position, according to IEC 704-
1:1982, is no more than 70dB(A).
18. Keep this User’s Manual for later reference.
19. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW
-20° C (-4° F) OR ABOVE 85° C (185° F). THIS MAY DAMAGE THE
EQUIPMENT.

- ix -
Preface
Do not use the power adapter that isn’t made for the equipment.
Supplying the equipment with inappropriate voltage may cause harm to
or burn the equipment.
To prevent possible hearing damage, do not listen at high volume
levels for long periods
General Cleaning Tips
You may need the following precautions before you begin to clean the device.
When you clean any single part or component for the device, please thoroughly
read and understand the details below.
1. We strongly recommended that you should shut down the system before
you start to clean any single components.
2. When you need to clean the device, please rub it with a piece of dry cloth.
3. Be cautious of the tiny removable components when you use a vacuum
cleaner to absorb the dirt on the oor.
4. Never drop the components inside the device or get circuit board damp or
wet.
5. Be cautious of all kinds of cleaning solvents or chemicals when you
use it for the sake of cleaning. Some individuals may be allergic to the
ingredients.
6. Try not to put any food, drink or cigarette around the device.
Cleaning Tools
Although many companies have created products to help improve the process
of cleaning your devices and peripherals, users can also use household items
to clean their devices and peripherals. Below is a listing of items you may
need or want to use while cleaning your devices or peripherals. Keep in mind
that some components in your device may only be able to be cleaned using
a product designed for cleaning that component, if this is the case it will be
mentioned in the cleaning.

- x -
Preface
• Cloth: A piece of cloth is the best tool to use when rubbing up a
component. Although paper towels or tissues can be used on most
hardware as well, we still recommend you to rub it with a piece of cloth.
• Water or rubbing alcohol: You may moisten a piece of cloth a bit
with some water or rubbing alcohol and rub it on the device. Unknown
solvents may be harmful to the plastics parts.
• Vacuum cleaner: Absorb the dust, dirt, hair, cigarette particles, and
other particles out of the device can be one of the best cleaning
methods. Over time, these items can restrict the airow in a device and
cause circuitry to corrode.
• Cotton swabs: Cotton swaps moistened with rubbing alcohol or water
are excellent tools for wiping hard to reach areas in your keyboard,
mouse, and other locations.
• Foam swabs: Whenever possible, it is better to use lint-free swabs such
as foam swabs.
Recommended Cleaning Procedures
1. Close all application programs
2. Close operating software
3. Turn off the equipment
4. Remove all peripherals
5. Disconnect the power cable
6. Proceed to clean.

- xi -
Preface
Disposing of the Equipment
•Within the European Union
EU-wide legislation, as implemented in each Member State,
requires that waste electrical and electronic products carrying
the mark (left) must be disposed of separately from normal
household waste.
This includes monitors and electrical accessories, such as signal cables or
power cords. When you need to dispose of your display products, please
follow the guidance of your local authority, or ask the shop where you
purchased the product, or if applicable, follow any agreements made
between yourself. The mark on electrical and electronic products only
applies to the current European Union Member States.
•Outside the European Union
If you wish to dispose of used electrical and electronic products outside the
European Union, please contact your local authority so as to comply with
the correct disposal method.

- xii -
Preface
Additional Information & Technical Support
You can download the related technical documents such as datasheet and
user’s manual as well as driver on our website.
Please do not hesitate to call or e-mail our customer service when you still
cannot get the information you need.
http://amobile-solutions.com/web_en/contact.php
E-mail: [email protected]
Warranty
This product is warranted to be in good working order during the warranty
period. Should this product fail to be in good working order at any time during
this period, we will, at our option, replace or repair it at no additional charge
except as set forth in the following terms. This warranty does not apply to
products damaged by misuse, modications, accident or disaster.
Vendor assumes no liability for any damages, lost prots, lost savings or any
other incidental or consequential damage resulting from the use, misuse of, or
inability to use this product. Vendor will not be liable for any claim made by any
other related party.
Vendors disclaim all other warranties, either expressed or implied, including but
not limited to implied warranties of merchantability and tness for a particular
purpose, with respect to the hardware, the accompanying product’s manual(s)
and written materials, and any accompanying hardware. This limited warranty
gives you specic legal rights.
Return authorization must be obtained from the vendor before returned
merchandise will be accepted. Authorization can be obtained by calling or
faxing the vendor and requesting a Return Merchandise Authorization (RMA)
number. Returned goods should always be accompanied by a clear problem
description.

- 1 -
1Chapter 1
Introduction
Chapter 1 Introduction

- 2 -
Introduction
1.1 Product Highlights
•Android 4.4 operating system
•Quad-core ARM Cortex-A9 @1.6 GHz
•Front bezel IP65 water and dust resistance
•Flat front bezel with 8" TFT LCD
•Built-in CAN 2.0b / OBD-II
•Built-in WLAN 802.11a/b/g/n and Bluetooth 4.0 BLE
•12~24V Wide-range voltage DC-input support
1.2 Package Contents
Upon opening the package, carefully inspect the contents. If any of the items
is missing or appears damaged, contact your local dealer or distributor. The
package should contain the following items:
IOT-800 8" Risc-based IoT Terminal
Terminal Block
Connector 2-pin DC Terminal Block, Plug, Green
Antenna Wi-Fi/Bluetooth Antenna
USB Cable 1M USB Cable
User Manual

- 3 -
Introduction
1.3 Optional Accessories
Power 12V/2A AC/DC Power Adapter w/ 2-pin power terminal
Antenna 3G / 4G
3G Module UMTS/HSDPA/HSUPA 900(850)/2100(1900)MHz ,GSM/
GPRS/EDGE 850/900/1800/1900MHz
4G Module
FDD LTE:Band 1, Band 3, Band 8
TDD LTE: Band 39, Band 40, Band 41 (38)
DC-HSPA+/HSPA+/HSPA/UMTS:Band 1, Band 9, Band 5,
Band 8
TD-SCDMA: Band 34, Band 39
GSM/GPRS/EDGE: 1800MHz/900MHz
NFC
ISO/IEC 14443A, ISO/IEC 14443B, FeliCa PCD Mode,
MIFARE 1K/4K, NFC Forum tag, ISO/IEC 15693, NFC-
IP1,NFCIP2,
NCI,EMVCo,ETSI/SCP,ISO/IEC 18000-3
GPS GPS Mouse

- 4 -
Introduction
1.4 Parts of the Device
17 18 19
4
5
1
7
6
8
20
2
3
9
10
11 11
12 13 14 15 16
12.0 megapixel camera 11 Panel mounting holes
2Microphone 12 10/100 Mbps RJ-45 LAN port
35-point projected capacitive touch
screen 13 2 x USB 2.0 ports
4Integrated 2W speaker 14 DB-9 RS-232 port
5NFC antenna area* 15 DB-9 RS-232/422/485 port
64x 3.3V GPIO,
1 x CAN 2.0b / OBD-II 16 Power on/off toggle switch
72-pin DC terminal, 12V~24V auto-
detection 17 4G antenna connector*
8microSD card slot 18 Wi-Fi / Bluetooth antenna connector
9Micro SIM (3FF) slot 19 3G/4G antenna connector*
10 UART connector 20 VESA 75 mounting holes (M3 size)
*3G, 4G and NFC are optional modules and your IOT-800 may not come with these components.

- 5 -
Introduction
1.5 Dimensions
Unit: mm
202.44
180.20
169.00
67.40
35.33
4.00
75.00
188.20
55.6
218.16
46.50
45.00
13.90 11.1
200.31
176.64
35.8
9.42
10.0 8.8
88.87
141.10
47.107.12
132.70
118.00
84.20
48.80
167.67
124.81
99.36
3.8

- 6 -
Introduction
1.6 Specications
System
CPU Quad-core ARM Cortex-A9 1.6GHz
OS Android™ v4.4
Memory 1GB LPDDR3
Flash 16GB eMMC
Peripherals and Devices
Front Camera 2.0 megapixel camera
Audio 1 x built-in speaker (2W)
1 x built-in microphone
Wireless
WCDMA / CDMA /
TDSCDMA / LTE
(optional)
1 x micro SIM (3FF) slot
GPS + BeiDou GPS mouse
WLAN IEEE 802.11 a/b/g/n
Bluetooth Bluetooth 4.0 low power BLE
NFC (optional) Support NFC transmission standard 14443A/B,15693,felica
I/O Interface
SD Card Micro SD Card slot, maximum 32 GB
UART 1 x UART
USB Host 2 x USB 2.0 High Speed
Speaker 1 x 8Ω/2W
DB9 Interface 1 x RS-232 (full function),
1 x RS-232/422/485 (TX/RX)
Power button Power on/off button
DIO Connectors 4 x 3.3V GPIO
CAN CAN 2.0b / OBD-II
Power-in Connect power input, 9V~36V/1.5A
RJ45 RJ45 x 1,support Ethernet (10/100Mbps)