Amped Wireless REC22P User manual

User’s Guide
REC22P
HIGHPOWERTM AC1200
WI-FI®RANGE EXTENDER

REC22P
USER’S GUIDE
1
CONTENTS
INTRODUCTION .......................................................................... 2
GETTING STARTED ...................................................................... 3
Package Contents.............................................................................3
LED Indicators, Ports and Buttons ....................................................4
SETUP GUIDE ...................................................................................5
Find a Setup Location .......................................................................5
Connect your PC or Tablet to the Range Extender ............................6
Welcome to the Dashboard..............................................................8
Scan for a Wireless Network.............................................................9
Connecting to a Secure Network ....................................................10
Extended Network Settings (SSID and Security).............................. 11
Connect to the new Extended Network ..........................................13
Setup Summary ..............................................................................14
5.0GHz WI-FI SETTINGS..............................................................18
Home Network Settings (5.0GHz)...................................................18
Extended Network Settings (5.0GHz)..............................................19
Security (5.0GHz)............................................................................ 21
Wi-Fi Protected Setup –WPS (5.0GHz) ...........................................22
User Access (5.0GHz)......................................................................23
Wireless Coverage Controls (5.0GHz) ............................................. 24
Access Schedule (5.0GHz)............................................................... 25
Advanced Settings (5.0GHz) ........................................................... 26
2.4GHz WI-FI SETTINGS..............................................................28
Home Network Settings (2.4GHz)...................................................28
Extended Network Settings (2.4GHz)..............................................29
Wi-Fi Protected Setup –WPS (2.4GHz) ...........................................32
User Access (2.4GHz)......................................................................33
Wireless Coverage Controls (2.4GHz) .............................................34
Access Schedule (2.4GHz) ...............................................................35
Advanced Settings (2.4GHz) ...........................................................36
BOOSTBAND™ TECHNOLOGY..................................................... 38
NETWORK SETTINGS ................................................................. 39
IP Settings.......................................................................................39
Wired Port Routing.........................................................................41
MANAGEMENT FEATURES......................................................... 42
Device Status ..................................................................................43
Network Statistics...........................................................................45
System Clock...................................................................................46
System Logs....................................................................................47
Upgrade Firmware .........................................................................48
Save/Reload Settings......................................................................50
Password Settings ..........................................................................51
TECHNICAL SPECIFICATIONS ...................................................... 51
DEFAULT SETTINGS.................................................................... 53
TROUBLESHOOTING AND SUPPORT INFORMATION ................... 54
REGULATORY AND WARRANTY INFORMATION……..……….……….. 68
LEGAL NOTICES, LICENSES AND DISCLAIMERS………………………….. 77

REC22P
USER’S GUIDE
2
2
INTRODUCTION
Thank you for purchasing this Amped Wireless product. At Amped Wireless we strive to provide you with the
highest quality products through innovation and advanced technology. We pride ourselves on delivering
products that outperform and go beyond your expectations. If you have any questions please feel free to
contact us. We’d love to hear from you and thank you for your support!
Email: [e-mail]
Call: 888-573-8830
Web: www.ampedwireless.com

REC22P
USER’S GUIDE
3
3
GETTING STARTED
Package Contents
Check to make sure you have all the contents within your package:
High Power AC1200 Plug-In Wi-Fi Range Extender
With Pass Through Outlet and USB Charging Port
Detachable High Gain Antenna
Setup Guide
CD: User’s Guide, Installation Video, Setup Guide, Wi-Fi Analytics Android App

REC22P
USER’S GUIDE
4
4
LED Indicators, Ports and Buttons
Signal Strength LED: Indicates when the Range Extender.
Power LED: Indicates when the Range Extender is powered on. The LED
will flash rapidly when there is active Wi-Fi data traffic.
Antenna Connector: Dual Band RJ-SMA antenna connector.
Compatible with all dual band antennas that have RP-SMA connectors.
Reset: Push down once to reboot the Range Extender. Hold down
for 5-10 seconds to reset the Range Extender back to factory settings.
WPS: Hold down for 3 seconds to enable WPS push button configuration.
Wired Port: RJ45 10/100/1000M Gigabit Port for connecting wired devices
such as PCs, TVs, game consoles and more.
Wired Port LEDs: Indicates when a networking device is connected to the
wired port. The LED flashes rapidly when wired data traffic is transmitted or received. Gigabit connections will
have a green LED.
Pass-Thru Power Outlet: Maintain use of your power outlet with an available pass through outlet.
USB Charging Port: Charge your USB powered devices with a fast charging USB port.

REC22P
USER’S GUIDE
5
5
SETUP GUIDE
Find a Setup Location
The location of where you install the Range Extender is very important to how it will function. The optimal
setup location should be somewhere no more than halfway between your Wi-Fi router and your Wi-Fi dead
zone.

REC22P
USER’S GUIDE
6
6
Connect your PC or Tablet to the Range Extender
a) Connect the included high gain antenna by screwing it into the antenna connector.
b) Plug the Range Extender into an available power outlet.
c) Connect your PC or Tablet to the Range Extender’s Wi-Fi network:
Amped_REC22P_2.4 or Amped_REC22P_5.0

REC22P
USER’S GUIDE
7
7
Open your Web Browser to Access the Web Menu
a. Open your web browser.
b. Type in: http://setup.ampedwireless.com
into the web address bar.
c. If the web menu fails to open, type in the
following IP address into your web address bar:
http://192.168.1.240
a. Disconnect your PC from all Wi-Fi networks
b. Attach an Ethernet cable between the PC and the Range Extender
c. Open your web browser and go to http://setup.ampedwireless.com again.

REC22P
USER’S GUIDE
8
8
Welcome to the Dashboard
The Dashboard will provide you with the current status of the
Range Extender.
Click SCAN to find an available network to extend.
The diagram on this page displays the terms used to describe:
1) The network you are trying to extend (Home Network).
2) The network that is rebroadcasted and extended
(Extended Network).
Study this diagram carefully as the terms used in the following
instructions will refer to these names.

REC22P
USER’S GUIDE
9
9
Scan for a Wireless Network
The Scan result will list all available 2.4GHz and 5.0GHz wireless
networks detected by the Range Extender –including each network
name (SSID), the operating channel, the type of security and the signal
strength.
If you are extending a dual band router, you will need to select the SSID
of your 2.4GHz network and the SSID of your 5.0GHz network.
The signal strength indicates the wireless connection between that
network and the Range Extender. It is important to choose networks
that are greater than 70%. A wireless network with a signal strength of less than 70% may create a poor
connection which results in slower throughput and frequent dropped connections.
If you fail to find any wireless networks, or your signal strength is below 70%, try moving the Range Extender
closer to the wireless network that you are trying to repeat and click SCAN again.
Once you have selected your wireless network(s), click Next to continue. If you are only connecting to one
network, simply select that 2.4 or 5.0GHz network and click Next to continue.

REC22P
USER’S GUIDE
10
10
Connecting to a Secure Network
If the wireless network(s) you are trying to repeat has wireless
security enabled, you will be prompted to enter a security key.
If you are repeating a dual band router, you will need to enter
the security key for both the 2.4GHz and 5.0GHz network. If
either network does not have security, leave the field blank.
After you have entered the security key(s), click Next to
continue.
If you do not know the key to the network you are trying to
repeat, then click Back and select another network.

REC22P
USER’S GUIDE
11
11
Extended Network Settings (SSID and Security)
The default SSID of the Range Extender is “Amped_REC22P_2.4”
and “Amped_REC22P_5.0”.
If you choose to "Clone" the settings from your Home
Network, the wizard will copy the SSID and security key of your
Home Network.
The SSID of the Extended Network will have a "_RE" at the end of
its name. For example: Home_Network_RE.
You can also manually enter a new network ID and security key.
The new security key must be at least 8 characters long.
Click Next to apply the settings.

REC22P
USER’S GUIDE
12
12
Connection Check
DO NOT LEAVE OR REFRESH THIS PAGE.
Allow the countdown to complete and the Wizard will
automatically redirect you to the next step.

REC22P
USER’S GUIDE
13
13
Connect to the new Extended Network
During the countdown process, the Range Extender will reboot
and disconnect the Wi-Fi connection. At this point, you will need
to reconnect your PC or tablet to the new Extended Network.
Follow the instructions on the screen to connect to the Extended
Network.
Once you have connected, click the OK button to complete the
setup process.
If there are problems with your configuration, the Wizard will
inform you to rescan for a network to extend.
If there are no problems, you will see the Setup
Summary on the following page.

REC22P
USER’S GUIDE
14
14
Setup Summary
Congratulations, the Range Extender is now successfully
configured. Your settings are now saved.
Print the Setup Summary details and save it for future reference.
If you have any wired devices that you would like to attach to the
Range Extender, you may do so now.
If you haven’t already positioned your Range Extender in an
optimal location, you may do so. All Range Extender settings are
saved and can be safely powered off for relocation.
Use the Signal Strength LED to assist you in finding the optimal
installation location. (See the following page for details.)
Enjoy your extended network!

REC22P
USER’S GUIDE
15
15
Finding an Optimal Placement Location (Signal Strength LED)
The Range Extender is equipped with a Signal Strength LED on the front of the device to help you find the most
optimal location for the Extender. It may take 1-3 minutes for the LED to register and display after plugging the
Extender into a wall outlet. After setup, the LED can be your guide when repositioning the Extender to a better
location (if needed). We recommend a signal strength of 70% or greater from the Router. If the Signal Strength
LED is green, your Range Extender is placed in an optimal location.

REC22P
USER’S GUIDE
16
16
Wired Port Routing
The Setup Wizard automatically selects the Home Network
(2.4GHz or 5.0GHz) your wired devices will be routed through
to connect to the Internet. If you wish to change this setting
you may do so from the web menu by accessing Network
Settings > Wired Port Routing.

REC22P
USER’S GUIDE
17
17
If the Home/Office Network connection fails try the following…
The failed connection page will provide you with information on why the connection failed. Read the
instructions carefully and retry your connection. The tips below will help to solve common issues:
a. Check to make sure your Home Network security settings are correct.
b. On the SCAN page, check that your Home Network is showing a signal of 70% or greater. If not, move
the Range Extender closer to your Home Network router and try again. If you are connecting to a dual
band router, ensure that both the 2.4GHz and 5.0GHz networks show a signal strength of 70% or
greater.
c. Check that your Home Network router’s DHCP server is enabled.
d. Try changing the channel of the Home Network router to a higher channel number and run the Setup
Wizard again.
e. Check the internet connection on your Home Network wireless router. Connect directly to your router
and attempt to access the web. If this fails, the problem is with your internet connection. Contact
your broadband provider to fix this issue first before configuring the Range Extender.
f. Try to reboot (unplug the power from the Range Extender and plug it back in) the Range Extender and
check to see if the connection is established (some networks may be very slow and take longer than
the allotted time for the Range Extender to successfully connect).

REC22P
USER’S GUIDE
18
18
5.0GHz WI-FI SETTINGS
5.0GHz Wi-Fi Settings: Home Network Settings (5.0GHz)
The Home Network Settings (5.0GHz) page allows you to adjust settings
for your 5.0GHz Home Network connection. These settings are for
adjusting the Range Extender’s Home Network connection after you have
already gone through the Setup Wizard and wish to adjust your current
configurations.
Home Network SSID (5.0GHz): Manually enter the Identification name of
the existing 5.0GHz Home Network you wish to connect to.
Channel Number: Enter the channel number of the Home Network. If the
channel number does not match, a connection will not be established.
Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 40Hz allows for faster speeds.
Each Channel Width will have a different selection of wireless channels to choose from. Select the channel
width you wish to use for your network. This setting must match that of your Home Network for a successful
connection.

REC22P
USER’S GUIDE
19
19
5.0GHz Wi-Fi Settings: Extended Network Settings (5.0GHz)
The Extended Network Settings page allows you to adjust
settings for your Extended Network.
SSID of Extended Network: The name used to identify your
Extended Network. This is the name that appears when a
user scans for available Wi-Fi networks.
Band: Allows you to setup access under a specific combination of Wi-Fi speed standards.
Broadcast SSID: Selecting Disable Broadcast SSID will hide the visibility of the Range Extender’s SSID. Users
must manually enter the SSID to connect.