Amped Wireless SB1000 User manual

High Power 1000mW Wi-Fi
Signal Booster
(for 2.4GHz 802.11b/g/n certified devices)
SB1000
BOOST THE RANGE OF
YOUR CERTIFIED WI-FI DEVICE
The Amped Wireless High Power 1000mW Wi-Fi Signal
Booster amplifies the signal strength of your certified Wi-Fi
device to deliver more wireless range and performance.
Typical wireless routers, access points and adapters have
wireless output powers of less than 50mW. The SB1000
replaces the removable antenna on your certified Wi-Fi
device to boost the signal strength by as much as 20 times,
to a staggering 1000mW of wireless power. The high gain
7dBi omni-directional antenna transmits the boosted signal
in a 360 degree radius to cover your entire home or office
with strong Wi-Fi coverage.
How it Works:
Key Features
• Plug and Play: Replaces the antenna
on your certified Wi-Fi device
• Works with certified* wireless b/g/n
devices with detachable antennas
• Signal filters ensure a safe, clean and
Wi-Fi friendly environment
• Antenna swivels and is detachable
from the base for different installa-
tion options
Wireless Coverage Pattern
360°Signal Pattern
*See regulatory specifications on back
SB1000
Advanced Amped Technology:
Wireless Amplifiers and High Gain Antennas:
The High Power Signal Booster features a massive 1000mW Amplifier to
boost Wi-Fi transmitting and receiving strength
The SB1000 is optimally paired and tuned with a High Gain 7dBi Omni-
Directional Antenna for maximized 360 degree wireless coverage.
AMPED RANGE
600
150 1000
Wireless Performance
OUTPUT POWER (mW)
2x1x 3x 4x
Amped Wireless Technology
High Gain 7dBi Antenna
1000mW Amplifier Inside
“Original”
HotSpot Connection
Boosted Wi-Fi Coverage
with the SB1000
Existing Wi-Fi Coverage
without the SB1000
*
The High Power Signal Booster replaces the
antenna on your wireless device and boosts
your wireless coverage by up to 4X!
Home Wireless
Network Router 1000mW Amplified
Signal Booster
SB1000
OUTPUT POWER mW (Mili-Watts)
4x Range 4x Range
WIRELESS RANGE
Standard Wi-Fi Router Output Power: 50mW
SB1000 Boosted Output Power: 1000mW
• Boosts the wireless output power of your
certified Wi-Fi device by up to 20X
• Wireless range is increased by up to 4X!
360° AMPLIFIED RANGE

Mounting Options
Wireless Standard: Works with IEEE 802.11b/g/n
Frequency Band: 2.4 - 2.48 GHz
Amplifier: 1000mW Power Amplifier
Low Noise Amplifier
Total Output Power: Up to 30dBm (Max)
Receive Gain: 12dB
Input Power Range: 1 to 19dBm
Connectors:
• Antenna Connector: Reverse SMA Jack
• Input Connector: Reverse SMA Plug
• Input Cable Length: 4 Feet
Antenna:
• 1 High Gain 7dBi Omni-Directional Antenna
(Detachable)
LED Indicators: Transmit and Receive (Blue)
System Requirements
• Certified* 2.4GHz Wireless b/g/n Device with a
detachable antenna
• Reverse SMA Jack Antenna Connector
(for the wireless device)
Package Contents:
• One High Power 1000mW Wireless Signal Booster
with 4 foot cable
• One High Gain 7dBi Omni Directional Antenna
• One Quick Installation Guide
Certified Wi-Fi Devices
Amped Wireless High Power Wireless-150N Repeater
*Under FCC regulations,The SB1000 may only be used with Wi-Fi devices that
have been certified for use with the SB1000 as a system.
** Wireless performance may vary as performance depends on many factors,
including environmental conditions and installation scenarios.
Designed by Amped Wireless in the USA
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
www.ampedwireless.com
1(888) 573-8830
Product Specifications:
Plug & Play Setup
© 2010 Amped Wireless. All rights reserved.
BOOST THE RANGE OF
YOUR CERTIFIED WI-FI DEVICE
WIRELESS ROUTER
Detach the antenna from your
Certified Wireless Device
Attach the Signal Booster
to the antenna connector
of your Wi-Fi device
Power on the Signal Booster
1)
2)
3)
1
2
3
Detachable Swivel Antenna:
Wall:
Includes mounting holes and accessories
to mount the antenna on any wall
Magnetic Mount:
The magnetic base allows for mounting
on metal surfaces, such as the side of a
computer case
Easy to replace and position
Desktop
Place the antenna on any flat surface for
easy placement
Uses Reverse SMA Antenna Connectors