Amptweaker DeFizzerator User manual

Zap–cuts extreme highs when turned down
Input Jack–from previous
effect, or amp’s FX Send
Switch–
Chooses
frequency
of Zap
control,
Fizz is
highest,
Crackle
lowest
Output Jack–connect to the
next pedal’s input or FX Return

Amptweaker, LLC
3482 Keith Bridge Rd, #345
Cumming, GA 30041
www.amptweaker.com
©2017 Amptweaker, LLC
made in USA
TM
Specs:
•Passive EQ impedance: 10K Ohm, must be driven from a buffer, other pedals,
amp’s FX send or active pickups…won’t work well right after hi-z guitar pickups
•May drop volume a bit when set on Crackle
•Dimensions: 3.7”W X 1.5”D X 2”H
•No batteries needed
•Weight: 5 ounces
Tips & Tricks:
•The highs may sound better with lower settings of the DeFizzerator™, and
brighter amp settings. This can cut through better, without sounding harsh.
•Set Amptweaker loops to Post for the most effect with the DeFizzerator
•The Fizz setting is VERY high, and may not be audible with some speakers
James Brown, Amp Engineer
Keep those ideas coming!