Amptweaker TIGHT METAL Assembly instructions

amptweaker
TIGHT METAL
Congratulations on the purchase of your TIGHT METAL
On behalf of the amptweaker team I would like to thank you
for your support of our company, products, and vision.
At amptweaker, we are only as good as our interaction with
you, the customer. Our product development is based on your
calls, emails, and comments on social media as we continue to
provide and create products players want and need.
TheTIGHT METAL currently in your possession is capable of an
amazing range of tones and it is our sincere hope you take some
time to dig in and see what works best for you.
This manual will provide a starting point for your sonic journey
but do not hesitate to experiment. Remember, as our
founder,legendary amp guru James Brown, has always said…..
”Good tone comes from tweaking……”
Sincerely,
JackThompson
President - amptweaker
amptweaker, LLC warrants this product against defects due to faulty
materials or workmanship for five years from the date of original retail
purchase.This warranty is non-transferable, so please keep your receipt
for proof of purchase.
If the product becomes defective within the warranty period,
amptweaker, LLC will repair or replace at its discretion. Please
contact amptweaker, LLC to attain an authorization number (RMA#)
and instructions to return it freight prepaid by the purchaser.
ThisWarranty is void if the product has been repaired or altered by
anyone other than the manufacturer, or if damage to the product
resulted from accident or misuse.There are no warranties which extend
beyond the terms described herein.
FiveYear LimitedWarranty
www.amptweaker.com
amptweaker
Tips &Tricks
The TIGHT METAL works best in front of a clean channel or as a
preamp.
Another option –Try connecting the output of theTIGHT ROCK into
the effect return of the amp, bypassing the preamp for the most
headroom.
TheThrash EQ setting cuts mids and extends the highs. For more bass,
try turning the Tone down and Volume up.
When using extremely high settings on theTight control, it may be
necessary to increase your amp’s bass control.
Remember-There is no right or wrong. If it sounds good, it is good!

Volume – Master volume
Tone - Adjusts highs up and down to balance with
lows. 12 o’clock is neutral.
Gain - Adjusts distortion. Set lower for vintage rock
tones, higher for modern, heavier tones.
EQ Switch – Select tone stack. Smooth warms high
end.
Noise Gate –Turn up to reduce hum and/or noise.
Tight Switch –Tight for aggressive, chunky attack.
Fat for a thicker, harmonically rich, distortion tone.
DC Jack – 9-18V, for 50W to 100W amp tone. Use
(-) center negative pin. (Power adapter not included)
Tight Metal Controls
www.amptweaker.com
Specifications
Input Impedance: 250K Ohm (with effect on)
Output Impedance: 1K Ohm (with effect on)
Current Draw: 13mA at 9V, 15mA at 18V
Adapter: 9-18VDC adapter w/5.5mm X 2.1
mm positive barrel, center ground negative (-)
Dimensions: 1.5” H, 2.5”W, 4.5” D
Made in USA