AMS F5884 User manual

Instruction Manual AMS F5884-F5886
1. Features
1.1 Time - Radio Controlled
Time (RC-DCF)
- 12/24 hour time display selectable
- Daily Alarm function
- PerpetualCalendarUptoYear2099
- Day of week in 10 languages user selectable
1.2 Temperature - Indoor measurable range: -10°C ~+ 50°C
-Measures°C/°Fuserselectable
1.3 Humidity - Indoor measurable range: 20% ~ 99%
2. Unit Appearance
!
!
Part A:
A1: Time Display
A2: Day of Week
A3: Temperature
A4: Radio Controlled Icon
A5: Humidity
A6: Date
Part B:

B1: “MODE/SET” button
B2: “ ” button
B3: “ /!” button
B4: “ALARM ON/OFF” button
B5: “RESET” button
B6: “SNOOZE” button
B7: Alarm mode slide switch
Part C:
C1: Wall Mount Hole
C2: Stand
C3: Battery Compartment
3. Getting Started:
3.1 Main Unit:
●Slide open battery compartment cover [C3]
●Insert 4 x AA size batteries observing polarity [“+” and“ –“ marks].
●Replacebatterycompartmentcover[C3]
4. Time and Alarm Setting
4.1 Radio Controlled Clock:
●After batteries inserted, the clock automatically starts to scan the DCF
time signal. Radio Control Icon“ ” flashes on the LCD.
●The clock automatically scans the time signal at 3.00 a.m. every day to
maintain accurate timing. If reception fail, scanning stops (“ ” on LCD
disappear)
●The clock can be set to scan the time signal manually by holding “ ”
button (B3) for 3 seconds. Each reception takes about 5 minutes.
●Stop scanning by holding “ ” button (B3) for 3 seconds.
●“ ” shown on the LCD if it is in Daylight Saving Time Mode
4.2 Manual Time Setting:
●In time display mode, hold “MODE” button (B1) for 3 seconds to enter
Clock/Calendar setting Mode.
●Press “ ” (B2) or “ ” (B3) button to adjust the setting and press
“MODE” button (B1) to confirm each setting.
(By keeping the “ ” (B2) or “ ” (B3) button pressed, could
accelerate the process and reach the desired value more quickly)
●The setting sequence is shown as follow: 12/24Hour, RCC on/off, Time
Zone, Weekday Language, Hour, Minute, Second, Year, Month, Date,
Temperature Unit, Alarm sound duration.
flashes,
Indicating now is
receiving DCF signal
turns on,
Indicating signal
received successfully
disappear,
Indicating signal
reception failed

●There are 10 languages for day of week: German, English, French,
Italian, Dutch, Spanish, Danish, Czech, Polish, Swedish
Note:
(1) All Setting mode will automatically exit in 15 seconds without any
adjustment
(2) For Time Zone: If you receive no RC-DCF frequency signal, the time zone
should be set to 0. Time Zone is used in countries which can received
the DCF frequency signal but the time zone is different from German
Time ( i.e. GMT+1).
(3) Alarm sound duration: there are two options available, “1 minute” and
“2 minutes”.
(4) Second only can be adjusted to 0.
4.3 Daily Alarm Function:
●Press “ MODE” button (B1) select to view alarm Time, “ALARM TIME”
flashes on the display
●When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to
enter alarm time setting. Press “ ” (B2) or “ ” (B3) button to adjust
the alarm time. Press “MODE” button (B1) to confirm the setting.
4.3 Snooze Alarm Function:
●Press “ALARM ON/OFF” Button (B4) to activate or deactivate the alarm.
If the alarm is on, alarm icon " " appears on the display.
Slide alarm mode switch (B7) to select the daily alarm alerts in weekday
only from Monday to Friday or whole week from Monday to Sunday.
●Press “SNOOZE” (B6) button when alarm alerts. The alarm snoozes for
around 5 minutes, then it alerts again. “ ” flashes on the LCD during
the snooze time. This process can be repeated 7 times.
●Except “SNOOZE” button, press any buttons to stop snooze alarm.
Otherwise, base on the previous setting of alarm sound duration, the
alarm alerts for 2 minutes or 1 minute, then stops automatically.
5. Thermometer
●If the temperature is out of the measurable range, LL.L (beyond the
minimum temperature) or HH.H (beyond the maximum temperature) will
be shown on the LCD.
●If the humidity is lower than 20%, !will be shown on the LCD, and
display 99% when it’s higher than 99%.
6. Precautions
●The clock loses its time information when the battery is removed.
●Do not expose it to direct sunlight, heavy heat, cold, high humidity or
wet areas
●Never clean the device using abrasive or corrosive materials or products.
Abrasive cleaning agents may scratch plastic parts and corrode
electronic circuits

AMS Uhrenfabrik A. Mayer GmbH Josef-Zähringer-Str.103 D-78120 Furtwangen