AMS 35 User manual

MODELS 35” & 39” SNACK
GLASS FRONT MERCHANDISER
ILLUSTRATED PARTS MANUAL
L0206 REV C
INTERNATIONAL A.M.S. S DE RL DE CV
KM. 9 CARR. AL CASTILLO NO. 8200
MPIO. DE EL SALTO, JAL. MEXICO 45680
5233-3-6-88-07-17 - Fax [phone]
www.amsint.com.mx
[email protected]
AUTOMATED MERCHANDISING SYSTEMS INC
255 WEST BURR BLVD.
KEARNEYSVILLE, WV 25430
304-725-6921 - Fax [phone]
[email protected]
www.amsvendors.com

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 2
THIS PAGE INTENTIONALLY LEFT BLANK

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 3
AMS Glass Front Merchandiser
Classic Models 35” & 39” Snack
Illustrated Parts Manual
Table of Contents
SECTION PAGE
INTRODUCTION
General Introduction 5
Manual Organization 5
Merchandiser Identification 6
Patent Disclosure 7
Publication Notice 7
CABINET ILLUSTRATIONS
Cabinet Covers and Screens Illustration 8
Cabinet Left Side and Center Illustration 10
Cabinet Right Side Illustration 14
CHILLER ILLUSTRATIONS
Chiller Illustration—Angled View 16
Chiller Illustration—Top View 18
Chiller Option—Ventilated Cabinet Illustration 20
DOOR ILLUSTRATIONS
Door, Coin Bay Illustration 22
Door, Hinges, Glass and Lighting Illustration 24
Door, External Parts Illustration 28
Door, Sensor System and Hopper Illustration 32
POS Display Illustration 34
ELECTRICAL HARNESS ILLUSTRATIONS 36
HELIX ILLUSTRATIONS
Bottle Tray Illustration 52
Universal (Snack/Candy/Food) Tray Illustration 56
Scrolling Price Tray Illustration 60
High Capacity Heavy Product Tray Illustration 62
39” Small Products, Tray Illustration 64
Helix Illustrations 66

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 4
THIS PAGE INTENTIONALLY LEFT BLANK

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 5
GENERAL INTRODUCTION
The purpose of this manual is to give our customers a way of identifying major service parts for repair and replacement. The illustrations and parts
list in this manual are for identification only. Some optional parts are also shown.
Illustrations of these major parts are keyed with our part numbers. The illustrations help identify the general design, position and orientation of
these parts. The note section may also give important information.
Please refer to the section on merchandiser identification on the following pages. Without the model style and serial number it may be difficult to
identify the required part.
Parts should be ordered from your distributor.
It is our intent to assist our customers with up-to-date documentation. However, this manual may not show all parts, variations or changes. Some
parts may be shown out of scale. This manual is itself subject to change without notice. If any errors are found, please notify AMS so the
correction can be included in later revisions. Engineering data and third party information are generally not included. The graphical data, group
assembly data, parts, part assembly, parts breakout information and tabular data conveyed by this manual is proprietary and belongs to AMS, and
holders without prior consent of or without knowledge of and by AMS must surrender this data immediately.
All measurements are in inches except where specified as Metric.
MANUAL ORGANIZATION
This manual is divided into general sections. Each section is further divided into the various subsections or subassemblies. These lead off with
one or more illustrations showing the parts and each part is identified with a number. Note that some part numbers are for assemblies fabricated
as a unit at AMS and are replaceable only as a unit. Also, other part numbers identify optional parts which may or may not have been contracted
for and factory installed by AMS.
The part number in the illustration is listed with the description or title for that part. In some instances there may be multiple parts to choose from.
The correct service or repair part for the style of merchandiser must be selected. A quantities column in the list indicates quantities required.
There is a note section where additional information may be found.
This manual contains additional and new information for a vendor as currently manufactured. Older revisions of this manual should be kept with
older vendors.

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 6
MERCHANDISER IDENTIFICATION
When requesting service, replacement parts or technical assistance, please use the Model Number and the Serial Number with Date Code,
found on the Serial Plate (See Fig. 1 below) affixed to the merchandiser. The plate is usually located inside the window. The information
contained on this plate is necessary to determine what parts, kits, or maintenance apply to your vendor.
Fig. 1 Typical Serial Plate
AMS 39-6 24
Manufacturer Cabinet Trays Selections
Width
Model Number Breakdown
AMS 39 -6-24 means this vendor is an Automated
Merchandising Systems merchandiser, 39” wide, with six
(6) trays making available twenty four (24) positions for
different products.
1-0902-0275
Built Year Month Sequence
Example of Serial Number Breakdown
1-0902-0275 is translated as U.S. built (1), manufactured in 2009,
month of February, and was the 275th manufactured.
Note: Manufactured in Mexico, Built = (2)
The next two digits identify the month. The first month of the year is 01
and the last month is 12.

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 7
PATENT DISCLOSURE
This merchandiser and/or certain of its components are covered by one or more of the following U.S. and international patents;
U.S. PATENTS: 6,145,699; 6,384,402; 6,520,373; 6,708,079; 6,794,634; 7,191,915; 7,343,220; 7,742,837; 7,446,302; 8,003,931
CANADIAN PATENT: 2,329,314
MEXICO PATENT: 230,714
PUBLICATION NOTICE
L0206, Revision C, ECN 4478, 11/28/18
It is our intent to assist our customers with up-to-date documentation: however, this manual may not contain all updates and is subject to revision
without notice. Please contact our Service Department with your requests or comments.

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 8
CABINET COVERS AND SCREENS ILLUSTRATION

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 9
CABINET COVERS AND SCREENS PARTS LIST
ITEM PART NO. PART DESCRIPTION QTY. NOTES
1 3000 Screw, Sheet Metal, TEK 8-18 (1/2” Long) 2 For One Trim
2 3009-02 Rivet, Pop, Steel, 1/8 (1/4” Long) 8 Quantities For One Cover
3 20187 Wrapper, Rear Chiller Hole Cover 1 Use For Ambient (No Chiller) Option
4 20187 Wrapper, Rear Chiller Hole Cover 1 Use For Ambient (No Chiller) Option
5 20275 Trim, Rear Chiller Hole 1
6
20375 Tank - Rear Chiller Hole Cover (35”)
1 Use For Ambient (No Chiller) Option
20187 Wrapper, Rear Chiller Hole Cover (39”)
7 20279 Screen, Rear Chiller Hole, 1/4 Mesh. 1
8 21481 Wrapper– Bottom Chiller Hole Cover (35”) 1 Use For Ambient (No Chiller) Option
20187 Wrapper– Bottom Chiller Hole Cover (39”)
9
21463 Screen, Bottom, Chiller Hole (35”), 8 Mesh
1
20279 Screen, Rear Chiller Hole (39”), 1/4 Mesh.
10 21464 Trim, Bottom Chiller Hole (35”) Ver. 2 1
20275 Trim, Rear Chiller Hole (39”)
NOTE: The rear opening and the bottom opening are not the same size on 35” Cabinets. All screen materials are fitted to trim parts, and trim parts
are attached to the outside of the cabinet with screws. The combination of screens may differ. Covers to seal the cabinet are always attached flush
inside and outside the cabinet (without using trim) with rivets.

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 10
CABINET LEFT SIDE AND CENTER ILLUSTRATION
24
29
29
28
23
15
2
14
19
26
16
25
21
1
20
10
11
6
9
1
33
36
34
31
32
4
12
1
8
13
27
22
1
7
30
Europe Only
3
17
5
18
35
37

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 11
CABINET LEFT SIDE AND CENTER PARTS LIST
ITEM PART NO. PART NAME QTY. NOTES
1 3000 Sheet Metal Screw TEK #8-18 54
2 3007-06 Screw, 5/16-18, Type F 16 4 Per Leg
3 3009-04 Rivet, Steel, 1/8" Black, 1/4" Grip 4
4 3009-02 Rivet, Steel, 1/8” Black, 1/8" Grip 1
5 3010 Nut, Square, Machine 1
6 3017-10 Washer, #10 SAE Flat 2 For Door Stop Cable (2 Places)
7 3018-06 Screws, ¼” x ¾”, Self Tapping, Hex Head 3 For Lock Assembly
8 3029-02 Bushing, Open/Closed 1
9 3060-10 Nut, 10-32, w/Nylon Insert 2 For Door Stop Cable (2 Places)
10 3061-06 Screw, 10-32 x ¾ Phillips Pan Head 2 For Door Stop Cable (2 Places)
11 3067 Spacer, .192 ID x .125 Length x 3/8 Dia. 2 For Door Stop Cable (2 Places)
12 3080 Strain Relief, Button Lock 1
13 3081 Wire Tie, 0.250 Panel Mount 1
14 3113 Push Nut, 3/16” Stud 1
15 20019 Leg, Roller Bracket 1
16 20121 Leveling Leg 5 Cabinet To Be Leveled Using All Legs
17 20135 Lock, Flange 1
18 20136 Lock, Cage 1
19 20177 Roller, Molded (Nylon) 1
20 20277 Cable Assembly, Door Stop 1
21 20291 Cover Plate, Hinge Hole, Ver. 2 1 For Top Hinge
22 20481 Extension, Left Vertical Rail Mount 1
23 21122 Assembly, Leg, Front Hinge with Thread Covers 1
24 21123 Assembly, Leg, Left Front With Thread Covers 1
25 21124 Assembly Leg, Rear with Thread Covers 2
26 21250 Shaft, Headed Roller (Zinc Plated) 1
27 28004 Left Rail Mount 1

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 12
ITEM PART NO. PART NAME QTY. NOTES
28 21989 Assembly, Cabinet, (35”) 1 Contact AMS for your application
22071 Assembly, Cabinet, (39”) 1
29
23231 Shipping Board 40” Long, Not Treated, (DOM)
23231-02 Shipping Board 38-3/8” Long, Not Treated, (DOM)
23231-01 Shipping Board 40” Long, Treated (ISPM 15), (EXPORT)
23231-03 Shipping Board 38-3/8” Long, Treated (ISPM 15), (EXPORT)
30 23305 Assembly, Low Temp/Snack Cabinet Lock 1
31 3827 Power Entry Module, 230V 1 Europe Only
32 25464 Plate, Power Entry Module, CE 1 Europe Only
33 25741 Cover, Power Cord Exit 1
34 25742 Liner, Power Cord Exit 1
35 25790 Cover, Wire Bushing 1
36 25791 Liner, Power Cord Cover 3
2
37 3057 Panel Mount, Inlet, IEC 1

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 13
THIS PAGE INTENTIONALLY LEFT BLANK

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 14
CABINET RIGHT SIDE ILLUSTRATION
1
1
20
13
13
4
16
15
1
1
3
18 9
5
12
5
82
17
SIZE 2X
SINGLE LAMP 10
6
7
11
6
ISRAEL
7
11
7
EUROPE
U.S.
SOUTH AFRICA
ELECTRICAL COMPONENT
OPTIONS
1
1
1
14
19
21
21
21

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 15
CABINET RIGHT SIDE PARTS LIST
ITEM PART NO. PART NAME QTY. NOTES
-
27917 Assy., Right Rail Mount, Standard, 110v (39”) 1
Contact AMS for your application
27917-02 Assy., Right Rail Mount, Standard, 220v (39”) 1
27918 Assy., Right Rail Mount, Standard, 110v (35”) 1
27918-02 Assy., Right Rail Mount, Standard 220v (35”) 1
1 3000 Sheet Metal Screw TEK #8-18 54
2 3006-08 Nut, 8-32, Hex, Machine Screw 1 For Attaching Power Harness
3 3009-02 Rivet, Steel, 1/8” Black, 1/8” Grip 2
4 3009-04 Rivet, Steel, 1/8" Black, 1/4" Grip 4 For Attaching 21479
5 3017-10 Washer, #10 SAE Flat 2 For Power Harness
6 3030 Filter, RFI 1 For Filtering Electrical Noise.
7 3274 Relay, Refrigeration, Single Pole 1 For 24V Control of Optional Chiller
8 3084-10 Screw, SEMS, 8-32 1 For Power Harness
9 3133-30 Assembly, Fuse Holder With Fuses 1 Use P/N 3097 3AG Fast Blow Fuse Only
10 3257 Transformer, Class II, 120V / 24V 1 For Power
11 3258 Transformer, CE, 230V / 24V 1 For Power
12 30084 Switch, Rocker, On/Off 1 For 24VAC Circuit Control
13 20207 Cover Plate, Column, Fixed 2
14 20211 Cover Plate, Transformer 1
15 20213 Flange, Right Vertical 1
16 21053 Stiffener, Right Vertical Rail Mount 1
17
23356 Plate, Fuse Holder & Power Switch
1 Attached Inside of Rail Mount
21479-01 Plate, Fuse Holder, Socket & Power Switch
Mount (Chilled)
18 21509 Decal, 24V Fuse, Ver. 2 1
19 21989 Assembly, Cabinet, (35”) 1
22071 Assembly, Cabinet, (39”)
20 23724 Rail Mount, Right Vertical, Snack, (35”) 1
21476 Rail Mount, Right Vertical, Snack, (39”)
21 25690 Meanwell Power Supply 1 110V Only
27913 Meanwell Power Supply w/ Ferrites 220V Only
Contact AMS for your application

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 16
CHILLER ILLUSTRATION—ANGLED VIEW
11
11
8
1
6
513
1
1
1
7
3
12
A
4
A - Housing Must Seal Along This Path
1
2
3
10
9

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 17
NOTE: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and
sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system,
creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing
refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed
by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty.
Ambient snack merchandisers have no chillers or chiller parts. Ventilated merchandisers have a forced air system without any chiller.
CHILLER PARTS LIST – ANGLED VIEW
ITEM PART NO PART DESCRIPTION QTY NOTES
1 3000 Sheet Metal Screw TEK #8-18 46
2 3018-06 Screws, ¼ x ¾, Self Tapping, Hex Head 2 For Attaching To Tank Walls
3 3018-08 Screws, ¼ x 1, Self Tapping, Hex Head 6 For Attaching To Tank Floor
4 3106 Evaporator Fan/Motor Assembly, 220V, 50Hz, 9W 1 Note Voltage!
5 3107 Evaporator Fan/Motor Assembly, 110V, 60Hz, 9W
6 21987 Evaporator Cover Plate (35”) 1
20316 Evaporator Cover Plate (39”)
7 20317 Evaporator Plenum 1
8 25633 Assembly, 1/4, Chiller, 120V 1 See Note
25633-01 Assembly, 1/4, Chiller, 220V
9
23304 Assembly, Chiller Housing, English (35”)
1
Housing must seal against Cabinet As Shown
23304-01 Assembly, Chiller Housing, Spanish (35”)
22105 Assembly, Chiller Housing, English (39”) Housing must seal against Cabinet As Shown.
Supplied with access Door.
22105-01 Assembly, Chiller Housing, Spanish (39”)
10 21614 Assembly, Temp Sensor, Sensit II 1
11 21989 Assembly, Cabinet, (35”) 1 Contact AMS For Your Application
22071 Assembly, Cabinet, (39”)
12 21991 Evaporator Mounting Panel, Stamped Drain Pan 1 For Stamped Pan Assemblies
13 21992 Assembly, Stamped Evaporator Drain Pan 1 Use with 21991, Evaporator Mounting Panel

AMS GLASS FRONT MERCHANDISER, MODELS 35” & 39” SNACK, ILLUSTRATED PARTS MANUAL, L0206, REV. C 18
CHILLER ILLUSTRATION—TOP VIEW

AUTOMATED MERCHANDISING SYSTEMS INC, [phone] / FAX [phone], www.amsvendors.com 19
CHILLER PARTS LIST – TOP VIEW
ITEM PART NO. PART DESCRIPTION QTY. NOTES (See Note A Below)
1 3065 Fan, Condenser Assembly, 220V, 50Hz, 1 Phase 1 Note Voltage!
3108 Fan, Condenser Assembly, 110V, 60Hz, 1 Phase Note Voltage!
2 3093 Sponge (Condenser Drain Pan) 4
3 20144 Refrigeration Harness 1 Use with Both 110V or 220V Systems
4 25633 Assembly, 1/4 H.P. Chiller, 120V, Ver. 2, AMS (WV) 1 See Note A
25633-01 Assembly, 1/4 H.P. Chiller, 240V, Ver. 2, AMS (WV)
5 21991 Evaporator Mounting Panel, Stamped Drain Pan 1 Used with Stamped Pan Assemblies
6 21992 Assembly, Stamped Evaporator Drain Pan 1 Use with 21991, Evaporator Mounting Panel
7 27460 Condenser Drain Pan Assembly, Formed 1 Stamped Fabrication with 4 Sponges
NOTE A: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and
sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system,
creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing
refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed
by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty.
Ambient snack merchandisers have no chillers or chiller parts. Ventilated merchandisers have a forced air system without any chiller.