AMT Star Trek K-7 Space Station User manual

AMT1415/12
IMPORTANT!
READ THESE POINTS BEFORE YOU BEGIN
POWER UNIT & STRUTS
MAIN HULL
MAIN FUSELAGE
ENTERPRISE STAND
12
11
14
13
MAIN HOUSING
(Upper)
ANTENNA
MAIN HOUSING
TOWER (Clear)
MAIN HOUSING
(Lower)
2
3
1
101
4
5
6
1
2
3
MINIATURE U.S.S. ENTERPRISE™SPACE SHIP INCLUDED
103
102
5
4
EXTENSION TOWER
THREE REQUIRED (Clear)
EXTENSION (Upper) 3 REQ’D
EXTENSION (LOWER) 3 REQ’D
EXTENSION LIGHTS
THREE REQUIRED (Clear)
(One each)
It is recommended to paint sub-assemblies before
final assembly.
Scrape paint away from surfaces to be cemented
together.
Assemble parts in the order shown, starting with
assembly 1.
TEST FIT all parts before cementing.
Trim excess plastic from parts before joining.
Cement all parts unless otherwise indicated by
the instructions.
Use paint and cement made for styrene
plastic only.
NOTE: Remove plastic
bar between
power units
TM

1
4
7
6
10
8
DOCKING PORT
(Upper)
DOCKING PORT
(Lower)
ASSEMBLED EXTENSIONS
THREE REQUIRED
EXTENSION LOCATING RING
MAIN BODY (Upper)
9
MAIN BODY (Lower)
ASSEMBLED
DOCKING PORT
3
ASSEMBLED MAIN BODY
ASSEMBLED MAIN HOUSING
2
A1415-200
NOTE: THIS STEP IS BEST
ACCOMPLISHED BY HANDLING
THE ASSEMBLY UPSIDE DOWN
TM & © 2023 CBS Studios Inc. STAR TREK and related marks and logos are trademarks of CBS Studios Inc. All Rights Reserved. AMT and design and Round 2 and design are
registered trademarks of Round 2, LLC. ©2023 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging designed in the USA. Made in China. All rights reserved.