Canon PAPER CRAFT User manual

Glue the six surfaces of part 1 marked
with to the rear side of part 2.
Although a mountain fold is used for the
folds in the blades of grass on part 2,
fold them outward where indicated here
to make it easier to work with part 1.
Complete the pot by
gluing the bottom in
place.
Assembling the pot
2-1
2-2
1-2
1
2
1-1
1-3
The bottom
of the pot
Before starting assembly:
Writing the number of each section on its back side before cutting
out the sections is highly recommended.
(* This way, you can be sure which section is which even after
cutting out the sections.)
Indicates where
sections should be glued together.
Indicates where to
insert sections. Do not glue the
sections together.
Assembly Instructions : Three A4 sheets (No. 1 to No. 3)
1
Halloween tree : Assembly Instructions
©Canon Inc. ©TakaTaka

3-5
Assembling the trunk, branches, roots, and pot together
Assembling the roots
Complete the trunk
by gluing parts 3-3
to part 3-1 and
then inserting part
3-2.
Apply glue to the spot
marked with a .
Apply glue to the spot
marked with a .
After gluing one side,
glue the other.
Glue the nine branches
in place.
Glue the three roots
in place.
Returning the
blades of grass to
the proper position
Complete the tree
by giving just a
slight mountain fold
to the blades of
grass.
After gluing one side,
glue the other.
This root is complete!
Assemble three roots in total.
This branch is complete!
Assemble nine branches in total.
Assembling the tree trunk
3-1 3-3
3-3
3-3
3-1
3-2
3-3
Cross-section of the
trunk
Assembling the branches
3-4
2
Halloween tree : Assembly Instructions
©Canon Inc. ©TakaTaka

Assembling the jack-o'-lanterns Decorating the tree
Assembling the tombstone Assembling the bat
Assemble a total of nine jack-o'-lanterns. Each has the same shape
and is assembled in the same way, with only their patterns differing.
Use a round pencil or similar
item to curve these parts.
Glue the tips in order, referring to
the numbers printed on them.
Glue the nine jack-o'-lanterns
beneath the branches.
After gluing the jack-o'-lanterns in
place, glue the surfaces of the
tombstones marked with in any
location you like.
The jack-o'-lantern is complete!
Your Halloween tree is complete!
4-1
4-2
1
5
2
3
Apply glue to the spot
marked with a .
Assemble a total of two
tombstones. Each has the
same shape and is
assembled in the same way,
with only their patterns
differing.
After gluing one
side, glue the other.
The tombstone is complete!
After first creasing the parts, glue the
reverse side of each to the reverse
side of the other.
5
6-2
6-1
3
Halloween tree : Assembly Instructions
©Canon Inc. ©TakaTaka