AMTI Products SHRINK User manual

1. NEMA PLUG, STYLE L6-20, TURN-LOCK, 250-
20AH.
2. ON-OFF SWITCH LOCATED ON RIGHT-HAND
SIDE.
4. TEMP: PRESS “TEMP” BUTTON AND KEY IN
DESIRED TEMP, THEN PRESS “ENTER” BUTTON.
5. TEMP IS SET @ 250 DEG. F. WILL TAKE TIME TO
RAMP UP TO TEMP.
QUICK START GUIDE
6. CONVEYOR SPEED: PRESS “CONVEYOR SPEED”
BUTTON, KEY IN DESIRED SPEED, THEN PRESS
“ENTER”.
3. LCD READOUT SHOWING HEATING SYSTEMS
OFF.
*SAFETY: ALWAYS TURN OFF POWER BEFORE INVESTIGATING JAMS OR
INTERNAL ISSUES. NEVER PLACE FINGERS, HANDS, OR TOOLS INTO THE
MACHINE WHILE IT IS PLUGGED IN.

8. CONVEYOR SPEED SET AT 100 INCHES/MIN. 9. ADJUST ENTRANCE & EXIT DOORS (W/
THUMBSCREWS) FOR DESIRED OPENING HEIGHT.
10. TO SHUT DOWN HEATERS: PRESS TEMP
BUTTON AND ENTER “0” THEN PRESS ENTER
BUTTON.
www.amtiproducts.com
847.588.7090
*SEE MANUAL FOR ALL SAFETY INFORMATION
11. TO STOP CONVEYOR: PRESS “RUN/STOP”
BUTTON AND CONVEYOR WILL STOP.
NOTE: SHRINK OVEN WILL AUTOMATICALLY SHUT
DOWN IN APPROXIMATELY 5 MINUTES OR YOU
CAN PRESS THE “ON/OFF” SWITCH TO OFF WHEN
TEMP SHOWS 200 DEGREES.