AMX PS2.8 User manual

Installation Guide
PS/N Power Supplies
AMX offers four system power supplies, with several variations available:
FIG. 1 shows the front and rear panels of the PSN 6.5.
PSN6.5 Specifications
The PSN6.5 is a Class 1 power supply, is CSA and CE approved, and UL listed.
NOTE: The PSN6.5 replaces the (obsolete) PSN4.2 and PSN6.3 power
supplies.
PSN4.4 and PS4.4 Specifications
The PS4.4 power supply is identical to the PSN4.4 except that the PSN4.4
comes with a NetLinx compatible 2-pin captive wire connector and the PS4.4
comes with a barrel-plug.
The PSN4.4 and PS4.4 power supplies are Class 1 power supplies; both are
CSA and CE approved and UL listed.
AMX PS/N Power Supplies
•PSN6.5 (FG423-41) With U.S. power cord.
(FG423-43) Without power cord.
•PSN4.4 (FG423-45)Includes 2-pin captive-wire connector and U.S. power
cord, with 3.2 mm captive-wire connector.
• PS4.4 (FG423-44) Includes U.S. power cord and barrel plug.
•PSN2.8 (FG423-17) Includes U.S. power cord, with 3.5mm captive-wire
connector.
• PS2.8 (FG423-05) Includes U.S. power cord, with 5mm captive-wire
connector.
(FG423-11) Includes U.S. power cord and barrel plug.
• PS3.0 (FG 423-30) Includes U.S. power cord and barrel plug.
NOTE: All models use an input connector sanctioned by the IEC (International
Electrotechnical Commission).
FIG. 1 PSN6.5 Power Supply
PSN6.5 Specifications
Dimensions (HWD): • 1.50’ x 5.55" x 9.25" (3.81 cm x 14.10 cm x 23.50 cm)
Weight: • 2.76 lbs. (1.25 kg) (without power cord).
Input Voltage: • 90-132 VAC, 2.6A, 47~63 Hz
• 180-264 VAC, 1.3A, 47~63 Hz
Output Voltage: • 13.5 VDC 6.5A
Output Current: • 6.5 A (continuous power output is 90 W max).
Ripple and Noise: • 350 mV peak-to-peak @ 70% load.
Protection: • Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
PWR Indicator: • Green LED indicates presence of DC on the output.
Connectors: • Three removable 2-pin 3.5 mm mini-Phoenix connectors
Rear Panel
Components:
• Three 12 VDC power supply connectors.
• Standard IEC (male) jack for the power cord.
Input Power Cord: • 6-foot (1.83 m) IEC power cord terminated with a
grounded Edison plug for AC input (U.S. only).
Enclosure: • Metal with black matte finish.
Temperature Range: • 32°F - 122°F (0°C - 50°C)
Certification: • UL: US listed - Class 1 Power Supply
• CSA approved
• CE approved
PSN6.5 Specifications (Cont.)
Included
Accessories:
• Single Universal input power cord (64-0009)
• Three removable 2-pin 3.5 mm mini-Phoenix connectors
(41-5025)
Optional
Accessories:
• AC-RK Accessory Rack Kit (FG515)
FIG. 2 PS4.4 Power Supply (showing both connectors)
PSN4.4 and PS4.4 Specifications
Dimensions (HWD): • 1.38" x 2.36" x 4.76" (3.5 cm x 6.0 cm x 12.1 cm)
Weight: • 1.1 lb. (.499 kg)
Input Voltage: • 100-240 +10% VAC
Input Frequency: • 47-63 Hz
Input Current: • 1.2A MAX at 115 VAC + full load
• 0.6A MAX at 230 VAC + full load
Output Voltage: • 13.5 VDC
Output Current: •4.4AMAX
Ripple and Noise: • 150 mV peak-to-peak @ full load
Protection: • Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
Power Indicator: • Green LED indicates the presence of DC on the output.
Connectors:
PSN4.4 • Mini 2-pin captive wire connector (3.5 mm).
PS4.4 • Barrel plug (see Barrel Plug Dimensions)
Input Power Cord: • 50 mm IEC power cord terminated with a grounded
Edison plug for AC input.
Enclosure: • Molded black matte plastic.
Barrel-plug connector
2-pin captive wire connector
(FG423-44)
(FG423-45)

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
5/08
©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax [phone] • technical support 800.932.6993 • www.amx.com
93-0423-41 REV: G
PSN2.8 and PS2.8 Specifications
FIG. 3 shows the PSN2.8. The PS2.8 power supply is identical to the PSN2.8,
except that the PSN2.8 comes with a 3.5 mm NetLinx compatible 2-pin mini
connector whereas the PS2.8 comes with a 5mm standard Axcess compatible
connector.
The PS2.8 also includes a spare 3.5 mm captive wire connector.
Note: The PS2.8 is also available with a barrel-plug (FG423-11) instead of the
2-pin captive wire connector.
The PSN2.8 and PS2.8 power supplies are Class 1 power supplies; both are
CSA and CE approved and UL listed.
• The PSN2.8 has an attached mini 2-pin captive wire connector
(3.5 mm).
• The PS2.8 comes with both an attached 2-pin captive wire connector
(5 mm) and a spare 3.5 mm captive wire connector.
Barrel Plug Dimensions
The dimensions of the Barrel Plug used by both the PS2.8 and PS4.4 power
supplies are:
• 2.1mm ID
• 5.5mm OD
• 9.5mm length
PS3.0 Specifications
FIG. 4 shows the PS3.0. The PS3.0 is a Class 1 power supply which is CE
approved and UL listed. The PS3.0 uses a barrel-plug connector.
PSN4.4 and PS4.4 Specifications (Cont.)
Temperature
Range:
• 32°F - 104°F (0°C - 40°C)
Certification: • UL: US listed - Class 1 Power Supply
• CSA approved
• CE approved
Included
Accessories:
• Single Universal input power cord (64-0009)
FIG. 3 PSN2.8 Power Supply
PSN2.8 and PS2.8 Specifications
Dimensions (HWD): • 4.6" x 2.5" x 1.5" (11.7 cm x 6.4 cm x 3.8 cm)
Weight: • 1 lb. (450 g)
Input Voltage: • 100-240 +10% VAC
Input Frequency: • 47-63 Hz
Input Current: • 0.9A MAX at 115 VAC + full load
• 0.6A MAX at 230 VAC + full load
Output Voltage: •13.5VDC
Output Current: • 2.8A (continuous power output is 35 W max).
Ripple and Noise: • 135 mV peak-to-peak @ full load
Protection: • Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
Power Indicator: • Green LED indicates the presence of DC on the
output.
Connectors:
PSN2.8 • Mini 2-pin captive wire connector (3.5 mm).
PS2.8 • 2-pin captive wire connector (5.0 mm),
• also available with barrel plug (see Barrel Plug
Dimensions)
Input Power Cord: • 6-foot (1.83 m) IEC power cord terminated with a
grounded Edison plug for AC input.
Enclosure: • Molded black matte plastic, with captive 6-foot (1.83
m) output cord and IEC male input power jack.
Temperature Range: • 32°F - 122°F (0°C - 50°C)
PSN2.8 and PS2.8 Specifications (Cont.)
Certification: • UL: US listed - Class 1 Power Supply
• CSA approved
• CE approved
Included Accessories: • Single Universal input power cord (64-0009)
FIG. 4 PS3.0 Power Supply
PS 3.0 Specifications
Dimensions (HWD): • 3.85’ x 1.77" x 1.22" (9.80 cm x 4.50 cm x 3.10 cm)
Weight: • 0.33 lbs. (150 g) (without power cord).
Input Voltage: • 100-240 VAC, 3.0 A, 47~63 Hz
Output Voltage: • 12 VDC
Output Current: •3.0A.
Ripple and Noise: • 200 mV (60Hz Ripple + Switching ripple and noise).
Protection: • Over-voltage, over-current, short-circuit, transient and
thermal. Switching regulated, overload protected.
PWR Indicator: • Green LED indicates presence of DC on the output.
Connectors: • 1.3mm barrel plug, 11mm long.
Input Power Cord: • 6-foot (1.83 m) IEC power cord terminated with a
grounded Edison plug for AC input (U.S. only).
Enclosure: • Metal with black matte finish.
Temperature Range: • Operating temperature: 32°F - 122°F (0°C - 50°C)
• Storage temperature: -4°F - 185°F (-20°C - 85°C)
Certification: • UL: US listed - Class 1 Power Supply
• CUL approved
• TUV approved
• FCC approved
• CE approved
• PSE approved
Included
Accessories:
• Single Universal input power cord (64-0009)