Analog Devices AD-FMCMOTCON1-EBZ User manual

One Technology Way · P.O. Box 9106 · Norwood, MA 02062-9106 · Tel: [phone] · Fax: [phone] · www.analog.com
Rev 21 Feb 2014 12:08 | Page 1
AD-FMCMOTCON1-EBZ Linux on Zynq Quick
Start Guide
This guide provides some quick instructions (still takes awhile to download, and set things up) on how
to setup the AD-FMCMOTCON1-EBZ on either:
ZED Board, Rev C or later
●
Requirements
You need a Host PC (Windows or Linux).
●
You need a SD card writer connected to above PC (Supported USB SD readers/writers are OK).
●
USB keyboard/mouse for the Zynq Device
●
HDMI Display (monitor or TV)
●
Creating the SD Card
Create SD Image for Zynq Boards
Adding the AD-FMCMOTCON1-EBZ bootfiles
On the boot partition on the SD card, the boot.bin and devicetree.dtb specific to the motor control
project must be copied. They can be downloaded from:
Boot files for ZED board
Connecting the hardware together
Instruction regarding the hardware connection can be found at:
Hardware connection user guide ZED board

Rev 21 Feb 2014 12:08 | Page 2
Booting the SD Card
ignore your PC, and now interact on the USB mouse/keyboard on the Zynq device1.
You should see two screens:2.
firefox:1.
Learn more about the network interface.1.
IIO Scope tool:2.
Learn more about the IIO Scope.1.
You are now done with booting from the SD card. You can interact with the GUI either over the3.
network, or with the HDMI monitor/USB keyboard mouse.
Using IIO SCOPE for AD-FMCMOTCON1-EBZ
Software user guide
Even thought this is Linux, this is a persistent file system. Care should be taken not to corrupt
the file system -- please shut down things, don't just turn off the power switch. Depending on
your monitor, the standard power off could be hiding. You can do this from the terminal as well
with:
sudo shutdown -h now

Rev 21 Feb 2014 12:08 | Page 3
Navigation - AD-FMCMOTCON1-EBZ
Up: OverviewNext.: ISE Project with Chipscope
© Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners. www.analog.com