andover SONGBIRD HR User manual
Quick-Start
SONGBIRC>
HR
INTERNeT
MUSIC
STREAMER
~
0 0
"""'
l'NJsE
9cndover
Introduction
Thank you
for
choosing Songbird
HR
.
Songbird
HR
delivers high-resolution audio streams from some
of
the best
Internet music sources such as Qobuz, Tidal, Amazon Music, and Spotify.
As more services become available, they will be added through Over-the-Air
updates. In addition, thousands
of
Internet radio stations may be enjoyed
via v-Tuner, I-Heart Radio and Tune-in.
Songbird
HR
can also access content from any DLNA
or
AirPlay 2 compati-
ble device on your network, such as computers, servers,
or
networkstorage
devices.You can also play content directly
from
your phone ortablet using
AirPlay2
or
Bluetooth. In addition, Songbird
HR
Works with Alexa, allowing
control from any Amazon Alexa devices on your network.
Although some content is free, you will be required
to
purchase a subscrip-
tion from the content supplier
for
specific premium services or advanced
features. Configuration
of
your DLNA device
to
allow sharing maybe
required in some instances.
On-Line
Instructions
This Quick-Start guide will explain the basic connections and get you
started. Once the basic setup is complete, refer
to
the owner's manual
for
complete operating instructions. Features and operation will evolve over
time
as your Songbird
HR
receives updates, therefore up
to
date instruc-
tions can be found on line. Use your phone
to
take a photo
of
this
QR
code
to
go
directly
to
the
most
current owner's manual.
System
Requirements
•
•
•
A WiFi router supporting the 2.4GHz
or
5GHz dual/mode
802.11
b/g/n/ac
protocols.
A Smartphone
or
Tablet connected
to
the WiFi network running
iOS
9.0
or
Android 6.0
or
newer.
Songbird
HR
requires an audio system
or
powered speaker
that
ac-
cepts line level analog (Aux)
or
a coax
or
optical digital input.
Songbird
HR
Front
Panel
8
ondcver
IN
PUT
Pt.1)$1;
Status Indicator Input/ModeSwitch
Play/Pause
Status
Indicator
-Colors indicate input source and status.
White -Network Streaming
mode
Blue -Bluetooth (Flashes in pairing mode)
Green -Analog Input
Teal -
USB
device
Red
-Optical
Yellow -Coaxial
Flashing White -System Booting
Flashing Orange -Setup
Mode
Flashing Red/Blue -System software is updating
Flashing Amber -Alexa notification
Input/Mode
Switch
-A short press toggles
to
the next source.
A long press
>5
seconds enters setup
mode
Play
Pause
-Each press toggles between Play and Pause mode when
Network streaming,
or
Mute/Unmute
for
other sources.
..
Songbird
HR
Rear
Panel
Analog Input Analog Output Wired NetworkConnection
USB
Thumb Drive Input
Coaxial
Digital In/Out Optical Digital In/Out PowerInput
Analog
Input
-Connect any Stereo Line-Level source
that
you wish
to
cast
to
otherSongbirds in Multiroom mode, or
to
playback locally using the app
for
input selection.
Analog
Output
-This isthe main output
to
connect Songbird
HR
to
your
amplifieror powered speakers
for
playback.
Digital
Outputs
-Optical or Coaxial digital outputs are used
to
connect
to
an amplifier orseparate component
DAC.
Digital
Inputs
-Connect any digital source you wish
to
control with the
Songbird Control app orcast
to
other Songbirds in Multiroom mode. All
Songbirds may be used as a simple
DAC
to
convert Digital inputs
to
analog
output.
Wired
Network
Connection
-Gigabit Ethernet connection may be used
for
higher network reliability when WiFi is weak or susceptable
to
interference.
USB
-Connect a
USB
Thumb Drive here
for
music playback.
Power
Input
-
USB-C
SV
/1A power input. Connect the supplied power
adapter here.
Setup
using
the
Classic
Songbird
Control
app.
These setup instructions refer
to
the original Songbird Control app.
An
updated app will soon be available which streamlines the setup procedure.
1.
Download the
Songbird
Control
app on the App Store
for
Apple
iOS
devices, or Google Play
for
Android.
2.
Plug the output from Songbird
HR
intothe appropriate input
of
your audio system.
3.
Press and hold the INPUT button
for
>3
seconds until the Status
LED
flashes. The voice prompt will say
"ENTERING
SETUP
MODE".
If
no action is taken after 35 Seconds the action will
need
to
be repeated.
4.
Open
your Smartphone's WiFi menu and look
for
"Songbird
HR-
XXXX".
Select this as your WiFi Network.
5.
Open
the Songbird Control app and when prompted choose
"ADD
DEVICE".
Follow the prompts from within the app
to
complete
setup.
When setup is complete, your phone will return to your original WiFi
networksettings
and
your Songbird
HR
will be ready
to
use.
You
do
not have
to
repeat the setup procedure each time.
Setup
using
the
New
Songbird
Control
app.
Once the newSongbird Control app. is posted, this streamlined setup
procedure may
be
used.
1.
Open
the Songbird Control app.
2.
Click the Device Page.
3.
If
the device does notautomaticalyappear,
click+
at
the top right
corner.
4.
Click the device you wish
to
configure.
5.
Enterthe correct network password.
6.
Songbird
HR
should be ready
to
go.
Compliance
Statements
FCC
Statement
This equipment has been tested and found
to
comply with the limits
for
a Class B digital
device, pursuant
to
Part 15
of
the
FCC
Rules. These limits are designed
to
provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and,
if
not
installed
and used in accordance with the instructions, may cause harmful interference
to
radio
communications.
However, there is no guarantee
that
interference will notoccurin a particular installation.
If
this equipment does cause harmful interference
to
radio ortelevision reception, which can
be determined by turning the equipment
off
and on, the user is encouraged
to
try
to
correct
the interference by one
or
more
of
the following measures:
-Reorient
or
relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connectthe equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consultthe dealer or
an
experienced radio/TVtechnician
for
help.
This device complies with part 15
of
the
FCC
Rules. Operation is subject
to
the following
two
conditions:
(1) This device may
not
cause harmful interference, and
(2) This device mustaccept any interferencereceived, including interference
that
may cause
undesired operation.
Changes ormodifications not expressly approved by the party responsible
for
compliance
could void the user's authority
to
operatethe equipment.
This equipment complies with
FCC
radiation exposure limits set forth
for
an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This device complies with Industry Canada licence-exempt
RSS
standard(s). Operation is
subject
to
thefollowing
two
conditions:
(1) This device maynot cause interference, and
(2)This device
must
accept any interference, including interference
that
may cause
undesired operation
of
the device.
IC
Warning:
Le
present appareil est conforme aux
CNR
d'lndustrie Canada applicables aux appareils
radio exempts de licence. l.'.exploitation est autorisee auxappareils radio exempts de licence.
l.'.exploitation est autorisee aux deux conditions suivantes:
(1) l'appareil ne doit pas produire debrouillage, et
(2) l'utilisateurde l'appareil doit accepter
tout
brouillage radioelectrique s ubi, memesi le
brouillage est susceptible d'en compromettre le fonctionnement.
Cet equipement est conforme aux limitesd'exposition aux rayonnements
FCC
etablies
pour un environnement non controle. Cet equipement
doit
etre installe
et
exploite avec une
distance minimale de 20cm entre le radiateur
et
votre corps.
Use
these
QR
codes
to
Download Songbird Control
from
the
App
Store
or
Google Play.
Apple -iOS Google -Android
Andover Audio, L.L.C.
15
High Street North Andover, Massachusetts 01845
www.andoveraudio.com
www.andoveraudio.com/support I978.775.3670
Copyright 2022, Andover Audio L.L.C.
AndoverAudio subscribes
to
a program
of
continuous improvement. As a result, some
productfeatures and characteristics may change without priornotice.
2311RA
Operating Manual
SONGBIRD HRA
INTERNET MUSIC STREAMER-AMPLIFIER
SONGBIRD HR
INTERNET MUSIC STREAMER
IMPORTANT NOTE:
At this time, unexpected delays in the certication
process of Songbird HR and Songbird HRA have delayed
the rollout of some features and services in the nal
app.
As soon as the certication process is complete, the
Songbird HR and HRA devices will be automatically
updated over the air, the Apps will be updated in the App
Store and Google Play, and this manual will be updated
to reect the nal status.
There is no performance degradation in the current
conguration, but additional services and new features
will add to your satisfaction and operating convenience
when updated.
We are sorry for this inconvenience and are working to
resolve this as soon as possible.
Use these QR codes to Download Songbird Control
from the App Store or Google Play.
Apple - iOS Google - Android
Introduction
Thank you for choosing your Songbird HR or HRA.
Your Songbird will deliver bit-perfect High Resolution output from AirPlay
2, Spotify Connect, TIDAL Connect, DLNA, MQA (Beta), Alexa Cast for
Amazon Music, and features gapless playback of Hi-Res lossless audio
up to 24Bit/192kHz. It streams music directly from the cloud or your local
music library. Songbird delivers high-resolution audio streams from some
of the best Internet music sources such as Qobuz, Tidal, Amazon Music,
and Spotify. As more services become available, they will be added through
Over-the-Air updates. In addition, thousands of Internet radio stations may
be enjoyed via v-Tuner, I-Heart Radio and Tune-in. The Songbirds can also
play les on a thumb drive and will receive or transmit Bluetooth content to
or from any Bluetooth devices within range.
Control your Songbird using the free Songbird Control app on the App Store
or Google Play. You can also use your favorite music apps such as Spotify,
TIDAL, Amazon Music, or any Chromecast-enabled app. You may also use,
HomePod, compatible Echo devices, or Apple Home App.
Songbird HR and HRA can be grouped with Homepod, Echo, AirPlay 2-en-
abled devices, other Alexa-compatible devices, or another Songbird device
to stream music throughout your home. You may group units to play the
same music throughout, or listen to separate programs on each. The Song-
birds feature analog and digital outputs that allow you to connect a local
source such as a turntable or CD player, and share that source wirelessly
with other Songbirds.
Although some content is free, you will be required to purchase a subscrip-
tion from the content supplier for specic premium services or advanced
features. Conguration of your DLNA device to allow sharing may also be
required in some instances.
Both Songbird models will accept analog and digital source inputs from
local components, in addition to les on a thumb drive and will also receive
Bluetooth content from any devices within range.
The Songbirds are capable of bit-perfect output from their digital outputs,
or superb analog output via their high quality ESS Sabre DAC.
Songbird HRA adds a 75W/Ch amplier powerful enough to drive virtually
any home loudspeaker to room-lling volume levels. A mono subwoofer
output replaces the coaxial digital output of the HR. It's built-in high quality
headphone output will deliver powerful output for private listening.
System Requirements
• A WiFi router supporting the 2.4GHz or 5GHz dual/mode
802.11b/g/n/ac protocols. (5GHz recommended.
• A Smartphone or Tablet connected to the same WiFi network running
iOS 9.0 or Android 6.0 or newer.
Setup
1. Download the Songbird Control app from the App Store or Google
Play.
2. For Songbird HR, connect its output to your audio system and switch
that system to the input used for Songbird HR. Songbird HRA may be
connected directly to a pair of speakers via its speaker outputs.
3. Apply power. After a few seconds a voice will say, "entering setup
mode", and the status LED will begin ashing orange. If it does not,
press and hold the input switch until the LED ashes orange.
4. Make sure Bluetooth and WiFi are both is turned on in your phone
settings.
5. Open the Songbird Control app. After a few moments the app should
display a list of all the new devices and ask if you want to setup the
device. If it does not, press the + at the top right corner of the device
screen to search again. The app will walk you through the next steps.
Setup with Apple Home
1. Tap the Apple Home app on your iOS device.
2. Press the + in the upper right corner. Then select "Add Accessory"
3. Press "More options..."
4. Select the device you wish to add.
Front Panel and Controls
Volume/Play/Pause/Mute Headphones
Status indicator
Input/Mode Switch Play/PauseStatus Indicator
Songbird HR
Songbird HRA
Status Indicator - Colors indicate input source and status.
White - Network Streaming mode
Blue - Bluetooth (Flashes in pairing mode)
Green - Analog Input
Teal - USB device
Red - Optical
Yellow - Coaxial
Flashing White - System is Booting, please wait.
Flashing Orange - Setup Mode
Flashing White/Blue - Software is updating. Please wait.
Flashing Amber - Alexa notication
Input/Mode Switch - A short press toggles to the next source.
A long press >5 seconds enters setup mode
Volume/Play/Pause/Mute (HRA)- Rotate to adjust output volume. Each
press toggles between Play and Pause mode when Network streaming, or
Mute and Unmute for other sources.
Play/Pause (HR) - Toggles between Play and Pause
Input/Mode Switch
Analog Output - This is the main output to connect Songbird HR to your
amplier or powered speakers for playback.
Digital Output - Digital output is used to connect to an amplier or separate
component DAC. Songbird HR has both optical or wired (coaxial) choices.
Both outputs are identical quality. Songbird HRA has replaces the coaxial
digital output with an analog subwoofer output.
Speaker Connections (HRA ONLY)- Use to connect passive Stereo
speakers from 2-8 Ohm impedance. The speakeer terminals will accept
bare wire, spade lugs, or banana plugs.
Rear Panel and Output Connections
Songbird HRA
Analog Input Analog Output
Coaxial Digital In
Optical Digital In/Out
Wired Network Connection USB Thumb Drive Input
Power InputSubwoofer Output Speaker Outputs
Analog Input Analog Output
Coaxial Digital In/Out Optical Digital In/Out
Wired Network Connection USB Thumb Drive Input
Power Input
Songbird HR
Analog Input - Connect any Stereo Line-Level source that you wish to cast
to other Songbirds in Multiroom mode, or to playback locally. You may use
the app or front panel pushbutton for input selection.
Digital Inputs - Connect any digital source you wish to listen to locally or
cast to other Songbirds in Multiroom mode. All Songbirds will convert
Digital inputs to analog output.
Wired Network Connection - Gigabit Ethernet connection may be used for
higher network reliability when WiFi is weak or susceptable to interference.
USB - Connect a USB Thumb Drive here for music playback.
Power Input (HR) - USB-C 5V/1A power input. Connect a USB-C cable from
the supplied power adapter here. Then plug the adapter into the wall outlet.
Power Input (HRA) - 32V/6A power input. IMPORTANT: Connect the power
adapter to the Songbird HRA rst, then plug the adapter into the wall outlet.
Plugging the adapter into the wall rst will cause a spark when the live
adapter plugged into the HRA. This is not dangerous or damaging, but can
be disconcerting if you're not expecting it.
Rear Panel and Input Connections
Bluetooth
Songbird HR and HRA may receive Bluetooth from local devices for
playback, or may transmit to Bluetooth speakers or headphones for
convenient playback.
To Receive: Select the Bluetooth input from either the app or the front panel
pushbutton. The Blue Flashing LED indicates pairing mode. Open your
phone setup screen and Select the Songbird.
To Transmit: Tap the Output mode icon below the vilume slider in the
Now-Playing screen in the app. Make sure the Bluetooth device you wish
to pait to is discoverable, and select "Connect". After a few moments you
should see a list of available devices. Tap that device to initiate pairing.
Note: When playing music les from your phone library, we recommend
playing from the My Music tab within the app over WiFi for the best
uncompressed delity, instead of using Bluetooth.
Multiroom / Multizone setup.
Multiple Songbird devices may be used around the home and linked
together for synchronized audio playback of either local sources, or
streamed internet content.
Make sure all the Songbirds you wish to link are on the same network, then
tap the "chain link" icon on the volume slider on the device page of the app.
Select the various Songbirds you wish to link, and tap done.
Note: When mixing Songbird HR and HRA with original Songbird on the
same network, the Songbird HR or HRA should be the originating device
for a local source such as Bluetooth, a turntable, or auxiliary source. Any
original Songbird devices should be used as the "receivers" for content
"transmitted" from an HR or HRA. Sources sent from an original Songbird
to other rooms will be delayed in the remote room, resulting in an echo.
Sources sent from a Songbird HR or Songbird HRA will be in sync, avoiding
echo.
There is inevetable delay with this process, therefore audio will not remain in
sync with video sources.
Compliance Statements
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
IC Warning:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée auxappareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique s ubi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Cet équipement est conforme aux limites d’exposition aux rayonnements FCC établies
pour un environnement non contrôlé. Cet équipement doit être installé et exploité avec une
distance minimale de 20cm entre le radiateur et votre corps.
Andover Audio, L.L.C.
15 High Street North Andover, Massachusetts 01845
www.andoveraudio.com
www.andoveraudio.com/support
Copyright 2023, Andover Audio L.L.C.
Andover Audio subscribes to a program of continuous improvement. As a result, some
product features and characteristics may change without prior notice.
2312RA
Table of contents
