Anker Nebula Mars 3 User manual
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
●Slightly move the projector to enable
autofocus and auto keystone correction.
●Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring 2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
support.seenebula.com/s
For a detailed user manual and more information,
scan the QR code or visit:
(For Middle East and Africa Only)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
+971 520750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (AU)
+90 (850) 460 14 14 (TR)
+8 (800) 511-86-23 (RU)
+86 400 0550 036（中国）
03 4455 7823（日本）
+82 02-1670-7098 (한국)
+91 18003138831 (India)
© Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations
Limited, registered in the United States and other countries.
Model: D2333
5100500XXXX V01
Notice: Shielded cables
All connections to other computing devices must be
made using shielded cables to maintain compliance
with FCC regulations.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: 1-800-988-7973
5150~5350 MHz can be used indoors only.
Notice (Canada)
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject to
the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
1) l'appareil nedoit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm
from the body to ensure compliance with RF exposure
requirements.
Lors de l'utilisation du produit, maintenez une distance
de 20 cm du corps afin de vous conformer aux
exigences en matière d'exposition RF.
5150~5250 MHz can be used indoors only.
5150~5250 MHz peut être utilisé à l'intérieur
uniquement.
The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are
those of their respective owners.
HDMI, and HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC in the United States and other
countries.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories Licensing Corporation.
Anker Innovations Limited | Room 1318-19, Hollywood
Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
Warning:
• Replacing a battery with an incorrect type may defeat
safeguards and create danger;
• Disposal of the battery / device in a fire or a hot oven
or other source of significant heat, or mechanically
crushing, or cutting of the battery / device, may result
in an explosion;
• Leaving the battery / device in an extremely hot
environment may result in an explosion or leakage of
flammable liquids or gases;
• The battery / device subjected to extremely low air
pressure may result in an explosion or leakage of
flammable liquids or gases.
Attention:
• Le remplacement d’une batterie par un type incorrect
peut annuler les protections et créer un danger;
• La mise au rebut de la batterie/du dispositif dans un
feu, un four chaud ou toute autre source de chaleur
importante, ou l’écrasement mécanique ou le
découpage de la batterie/du dispositif, peut entraîner
une explosion;
• Laisser la batterie/le dispositif dans un environnement
extrêmement chaud peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables;
• La batterie / le dispositif soumis à une pression d’air
extrêmement faible peut entraîner une explosion ou
une fuite de liquides ou de gaz inflammables.
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice (Europe and United Kingdom)
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
For the Declaration of Conformity, visit the Web site
https://uk.seenebula.com/.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this
device is in compliance with Radio Equipment
Regulations 2017(SI 2017/1206). The full text of the UK
declaration of conformity is available at the following
internet address: https://uk.seenebula.com/.
The suitable temperature range for the projector and its
accessories is 0°C~35°C / 32°F~95°F.
The adapter is for indoor use only. The adapter type is
NSA180EC-19094701 with rated output voltage /
current of 19.0VDC / 9.47A.
RF exposure information
The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm
between the device and the human body. To maintain
compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and
human body.
This product complies with the radio interference
requirements of the European Community.
This product complies with the radio
interference requirements of the United
Kingdom.
ATTENTION RISQUE D'EXPLOSION SI LA
BATTERIE EST REMPLACÉE PAR UN TYPE
INCORRECT. ÉLIMINER LES BATTERIES USÉES
SELON LES INSTRUCTIONS.
Notice (United States of America)
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF
exposure requirements. The device can be used in
fixed/mobile exposure condition. The min separation
distance is 20cm.
Frequency bands and power as below:
5150~5350 MHz can be used indoors only.
The following importer is the responsible party (contract
for EU matters):
Anker Innovations Deutschland GmbH I
Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract
for UK matters):
Anker Technology (UK) Limited I GNR8, 49 Clarendon
Road, Watford, Hertfordshire, WD17 1HP, United
Kingdom
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps
protect natural resources, human health, and the
environment. For more information on disposal
and recycling of this product, contact your local
municipality, disposal service, or the shop where
you bought this product.
Function Bands Max.PowerOperation Frequency
Bluetooth
(Projector)
WIFI
(Projector)
Bluetooth
(Remote Control)
2.4 GHz EIRP 8 dBm2402-2480 MHz
2.4 GHz EIRP 20 dBm2412-2472 MHz
5 GHz
EIRP 20 dBm5150-5250 MHz
EIRP 20 dBm5250-5350 MHz
EIRP 20 dBm5470-5725 MHz
EIRP 20 dBm5725-5850 MHz
2.4 GHz 2402-2480 MHz EIRP 3.62 dBm
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
AT BE BG HR CY CZ DK
Important Safety Instructions
• For pluggable equipment, the socket-outlet shall be
easily accessible.
• Please ensure you use only the adapter offered by the
manufacturer. Using an unauthorized adapter may be
dangerous and violate the Terms of Use and product
warranty.
• Do not use the product in an environment where
the temperature is too high or too low. Never expose
the product to strong sunshine or wet environments.
• It is recommended to supply the product in an
environment with a temperature that ranges from
5°C~25°C / 41°F~77°F..
• When supplying power, place the device in an
environment that has a normal room temperature and
good ventilation.
• Do not use the product in any way other than
described herein in order to avoid personal injury or
property damage.
• User should comply with the laws and regulations of
the corresponding countries and regions where the
equipment is located (used), pay attention to safety
obligations, and strictly prohibit the use of our products
or equipment for any illegal purposes. Our company will
not be responsible for any violators' legal liability under
any circumstances.
Pairing
Connected
1
13 16151411 12
109
Press to switch to Bluetooth speaker mode and
select Nebula Mars 3 to connect.
Use as a Bluetooth Speaker
Download the Nebula Connect app for the best
projector experience.
Nebula Connect App
< Settings Bluetooth
Nebula Mars 3
Bluetooth
Connected
DEVICE
Other manuals for Nebula Mars 3
1
Table of contents
Other Anker Projector manuals
Anker
Anker Nebula Solar User manual
Anker
Anker Nebula Mars II Pro User manual
Anker
Anker Nebula Apollo User manual
Anker
Anker NEBULA Vega User manual
Anker
Anker D2421 User manual
Anker
Anker Nebula Capsule Max User manual
Anker
Anker D2121G11 User manual
Anker
Anker Nebula Capsule 3 Laser User manual
Anker
Anker Nebula Capsule Max User manual
Anker
Anker NEBULA Vega User manual
Anker
Anker Nebula Cosmos Max User manual
Anker
Anker Nebula Mars II Pro User manual
Anker
Anker Nebula Astro User manual
Anker
Anker Nebula Prizm II Pro User manual
Anker
Anker Nebula Capsule Max User manual
Anker
Anker Nebula Astro User manual
Anker
Anker Nebula Cosmos Max User manual
Anker
Anker Nebula Cosmos Max User manual
Anker
Anker NEBULA Capsule Pro User manual
