Anker Soundcore Rave A3391 User manual

User Manual
Soundcore Rave
A3391
Safety Instructions
① Avoid dropping.
② Do not disassemble.
③ Avoid extreme temperatures.
④ Do not use the device outdoors during thunderstorms.
⑤ Use original or certified cables.
⑥ Do not use any corrosive cleaner / oil to clean.
What’s Included

At a Glance
①Central Volume Knob (For speaker volume control)
② Power Button / Power Indicator
③Source Input Button / Source Input Indicator
④ Bluetooth Button / Bluetooth Indicator
⑤ Previous Track Button
⑥Multi-function Button
⑦ Next Track Button
⑧ Light Effects Button / Light Effects Indicator
9.Bass Up Button / Bass Up Indicator
10. MIC ECHO Volume Knob (For microphone volume control)
11. AC Power Input
12. Reset Hole

13. Mic Input
14. Audio IN
15. Audio OUT
16. USB Port
17. Power IQ USB Port
Using Your Soundcore Rave
1. Turn On / Off
ON Press and hold for 1 second
OFF Press and hold for more than 2 seconds
a. Bluetooth Mode

Note: Soundcore Rave can pair up to 2 mobile devices via Bluetooth(Dual Bluetooth
Connection).
Flashing Blue
Bluetooth Pairing Mode
Solid Blue
改图：实心黑圈
Connected to a device
Enter True Wireless Stereo Group Mode /
Disconnect True Wireless Stereo

Double Flashing Blue
True Wireless Stereo Group Mode
Solid Blue
改图：实心黑圈
Connected to True Wireless Stereo
With True Wireless Stereo technology, you can pair your Soundcore Rave with
another Soundcore Rave to explore the best sound effects with left and right sound
channels separated on both speakers.
改图：
Play / Pause

Play Next Song
Play Previous Song
Press to turn Bass Up on and off
Press and hold for 2 seconds to switch between Indoor / Outdoor
modes.
Activate Siri / Other Voice Control Software
Volume Up / Down
Check available Light Effects modes on Soundcore App.
When turned on, Soundcore Rave will automatically connect to the last connected
device if available. If not, press the Bluetooth pairing button to activate pairing

mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then
repeat the pairing steps.
Having connection problems? Remove Soundcore Rave from your device’s
Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To
get the best sound quality, make sure there is a clear line of sight between the
connected device and your speaker.
b. Source Input
Plug in an audio cable or insert USB drive, then press the source input button to
switch between AUX in mode and USB mode(support FAT32 / MP3 / WMA formats).
Solid Green(Source input indicator)
AUX in mode

Solid White(Source input
indicator)
USB mode
*SoundLine AUX cable sold separately.
When using AUX mode, control audio playback via the connected device.
c. Connect Multiple Rave Speakers
Soundcore Rave can connect to other Soundcore Raves via RCA cables to form a wired
party chain.
d. Microphone Connection

Connect the microphone to MIC IN port. You can adjust the microphone volume by turning
the MIC ECHO volume knob.
3. Charging your Soundcore Rave
Battery level <10%
Battery level <25%

Battery level 25%~55%
Battery level 51%~75%
Battery level 75%~100%
Slow Flashing White(Power
indicator)
Charging
You can charge your mobile device through the Power IQ USB port on Soundcore Rave.
Use the included AC power cable to charge your Soundcore Rave and make sure it
is fully charged before its first use.