Anker Soundcore Flare User manual

Model No.: A3161
51005000906 V01
Soundcore Flare
蓝牙音箱
User's manual
Bedienungsanleitung | Guide d’Utilisation | Guida d’Utilizzo
Manual de Instrucciones | Manual de Instruções | 取扱説明書
用户手册 | 사용자 메뉴얼 | Начальное руководство |

01 02
EN EN
EN At a Glance
1 12
6
7
8
3
4
5
1Volume Buttons for Volume Control 5Bluetooth Button
2Bass Up Button 6Power Button
3Multi-function Button 73.5mm Audio Input Port
4Light Eects Button 8micro USB Port
Safety Instructions
• Avoid dropping.
• Do not disassemble.
• Soundcore Flare can be immersed in water up to 1m for up to 30 minutes.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner/oil to clean.
What’s Included
Soundcore Flare
User's manual

03 04
EN EN
Using Your Soundcore Flare
1. Turn on / o
2"
1
O
On
a. Bluetooth mode
Bluetooth ON
Anker
SoundCore Flare
4
× 1
× 1
Flashing White Bluetooth Pairing Mode
Solid White Connected to a device
Enter True Wireless Stereo Pairing Mode /
Disconnect True Wireless Stereo
Double Flashing White True Wireless Stereo Pairing Mode
Solid White
Connected to True Wireless Stereo
Note: Once connected, the status indicator will
stay white for 5 seconds.
3 3

05 06
EN EN
With True Wireless Stereo technology, you can pair your Soundcore Flare
with another Bluetooth speaker (Soundcore Flare) to explore the best sound
eects with le and right sound channels separated on both speakers.
T
Play / Pause
Play Next Song
Play Previous Song
Press to turn Bass Up on and o
Press and hold for 2 seconds to reset EQ settings
Answer Call / End Call
Reject Call / Switch between a call on hold and an active call
End current call and answer incoming call / End current call
and switch to call on hold
Switch audio source between Speaker and Phone
Put current call on hold and answer incoming call
Activate Siri / Other Voice Control Soware
Volume Up / Down
Solid White On a Call
Flashing White Incoming Call
Press and hold for 2 seconds to turn Light Eects O
Press to turn Light Eects On
Press once to switch between Light Eect modes
When turned on, Soundcore Flare will automatically connect to the last
connected device if available. If not, press the Bluetooth pairing button
to activate pairing mode.
To pair a dierent device, press the Bluetooth button to re-enter pairing
mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Flare from your
device’s Bluetooth history and ensure it’s less than 3 feet away. Then
try pairing again. To get the best sound quality, make sure there is a
clear line of sight between the connected device and your speaker.
T

07 08
EN EN
b. AUX-In mode
AUX
AUX
* SoundLine AUX cable sold separately.
Plugging in an audio cable will automatically switch to AUX mode.
When using AUX mode, control audio playback via the connected
device.
T
Charging your Soundcore Flare
Slow Flashing Red Low Battery
Solid Red Charging
O Fully Charged
Use the included USB cable to charge your Soundcore Flare and make
sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not
charge your speaker for extended periods.
When not in use, store your speaker in a cool place.
T

09 10
EN EN
Specifications
Specifications are subject to change without notice.
T
Input: 5 V 2 A
Audio output: 6 W x 2
Battery capacity: 4400 mAh
Charging time: 3.5 hours
Play time (varies by volume level and music content): 12 hours
Size: 89 x 89 x 151 mm / 3.5 x 3.5 x 5.95 in
Weight (without packaging): 530 g / 18.7 oz
Bluetooth version: V4.2 + EDR
Range: 20 m / 66 
1
Soundcore App
- Light effect
- Update firmware
- Wave Equalizer
- Stereo or Boost mode
- Rename
- More